From: Mauro Carvalho Chehab Date: Tue, 18 Oct 2016 19:44:02 +0000 (-0200) Subject: [media] bt8xx: don't break long lines X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=652fd6eaebc7ff2b268ca905e6aec5bd001b1b16;p=linux-beck.git [media] bt8xx: don't break long lines Due to the 80-cols restrictions, and latter due to checkpatch warnings, several strings were broken into multiple lines. This is not considered a good practice anymore, as it makes harder to grep for strings at the source code. As we're right now fixing other drivers due to KERN_CONT, we need to be able to identify what printk strings don't end with a "\n". It is a way easier to detect those if we don't break long lines. So, join those continuation lines. The patch was generated via the script below, and manually adjusted if needed. use Text::Tabs; while (<>) { if ($next ne "") { $c=$_; if ($c =~ /^\s+\"(.*)/) { $c2=$1; $next =~ s/\"\n$//; $n = expand($next); $funpos = index($n, '('); $pos = index($c2, '",'); if ($funpos && $pos > 0) { $s1 = substr $c2, 0, $pos + 2; $s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2; $s2 =~ s/^\s+//; $s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne ""); print unexpand("$next$s1\n"); print unexpand("$s2\n") if ($s2 ne ""); } else { print "$next$c2\n"; } $next=""; next; } else { print $next; } $next=""; } else { if (m/\"$/) { if (!m/\\n\"$/) { $next=$_; next; } } } print $_; } Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/pci/bt8xx/bttv-cards.c b/drivers/media/pci/bt8xx/bttv-cards.c index 8a17cc0bfa07..a1b0f3193bc0 100644 --- a/drivers/media/pci/bt8xx/bttv-cards.c +++ b/drivers/media/pci/bt8xx/bttv-cards.c @@ -125,10 +125,8 @@ module_param_array(remote, int, NULL, 0444); module_param_array(audiodev, int, NULL, 0444); module_param_array(audiomux, int, NULL, 0444); -MODULE_PARM_DESC(triton1,"set ETBF pci config bit " - "[enable bug compatibility for triton1 + others]"); -MODULE_PARM_DESC(vsfx,"set VSFX pci config bit " - "[yet another chipset flaw workaround]"); +MODULE_PARM_DESC(triton1, "set ETBF pci config bit [enable bug compatibility for triton1 + others]"); +MODULE_PARM_DESC(vsfx, "set VSFX pci config bit [yet another chipset flaw workaround]"); MODULE_PARM_DESC(latency,"pci latency timer"); MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list"); MODULE_PARM_DESC(pll, "specify installed crystal (0=none, 28=28 MHz, 35=35 MHz, 14=14 MHz)"); @@ -141,8 +139,7 @@ MODULE_PARM_DESC(audiodev, "specify audio device:\n" "\t\t 2 = tda7432\n" "\t\t 3 = tvaudio"); MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition."); -MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)" - " [some VIA/SIS chipsets are known to have problem with overlay]"); +MODULE_PARM_DESC(no_overlay, "allow override overlay default (0 disables, 1 enables) [some VIA/SIS chipsets are known to have problem with overlay]"); /* ----------------------------------------------------------------------- */ /* list of card IDs for bt878+ cards */ diff --git a/drivers/media/pci/bt8xx/bttv-driver.c b/drivers/media/pci/bt8xx/bttv-driver.c index 97b91a9f9fa9..fb4aefbcc8f8 100644 --- a/drivers/media/pci/bt8xx/bttv-driver.c +++ b/drivers/media/pci/bt8xx/bttv-driver.c @@ -148,8 +148,7 @@ MODULE_PARM_DESC(irq_debug, "irq handler debug messages, default is 0 (no)"); MODULE_PARM_DESC(disable_ir, "disable infrared remote support"); MODULE_PARM_DESC(gbuffers, "number of capture buffers. range 2-32, default 8"); MODULE_PARM_DESC(gbufsize, "size of the capture buffers, default is 0x208000"); -MODULE_PARM_DESC(reset_crop, "reset cropping parameters at open(), default " - "is 1 (yes) for compatibility with older applications"); +MODULE_PARM_DESC(reset_crop, "reset cropping parameters at open(), default is 1 (yes) for compatibility with older applications"); MODULE_PARM_DESC(automute, "mute audio on bad/missing video signal, default is 1 (yes)"); MODULE_PARM_DESC(chroma_agc, "enables the AGC of chroma signal, default is 0 (no)"); MODULE_PARM_DESC(agc_crush, "enables the luminance AGC crush, default is 1 (yes)"); @@ -3506,8 +3505,7 @@ static void bttv_irq_debug_low_latency(struct bttv *btv, u32 rc) (unsigned long)rc); if (0 == (btread(BT848_DSTATUS) & BT848_DSTATUS_HLOC)) { - pr_notice("%d: Oh, there (temporarily?) is no input signal. " - "Ok, then this is harmless, don't worry ;)\n", + pr_notice("%d: Oh, there (temporarily?) is no input signal. Ok, then this is harmless, don't worry ;)\n", btv->c.nr); return; } diff --git a/drivers/media/pci/bt8xx/bttv-i2c.c b/drivers/media/pci/bt8xx/bttv-i2c.c index d43911deb617..274fd036b306 100644 --- a/drivers/media/pci/bt8xx/bttv-i2c.c +++ b/drivers/media/pci/bt8xx/bttv-i2c.c @@ -44,15 +44,13 @@ static int i2c_scan; module_param(i2c_debug, int, 0644); MODULE_PARM_DESC(i2c_debug, "configure i2c debug level"); module_param(i2c_hw, int, 0444); -MODULE_PARM_DESC(i2c_hw,"force use of hardware i2c support, " - "instead of software bitbang"); +MODULE_PARM_DESC(i2c_hw, "force use of hardware i2c support, instead of software bitbang"); module_param(i2c_scan, int, 0444); MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time"); static unsigned int i2c_udelay = 5; module_param(i2c_udelay, int, 0444); -MODULE_PARM_DESC(i2c_udelay,"soft i2c delay at insmod time, in usecs " - "(should be 5 or higher). Lower value means higher bus speed."); +MODULE_PARM_DESC(i2c_udelay, "soft i2c delay at insmod time, in usecs (should be 5 or higher). Lower value means higher bus speed."); /* ----------------------------------------------------------------------- */ /* I2C functions - bitbanging adapter (software i2c) */ diff --git a/drivers/media/pci/bt8xx/bttv-input.c b/drivers/media/pci/bt8xx/bttv-input.c index a75c53da224a..4da720e4867e 100644 --- a/drivers/media/pci/bt8xx/bttv-input.c +++ b/drivers/media/pci/bt8xx/bttv-input.c @@ -185,8 +185,8 @@ static u32 bttv_rc5_decode(unsigned int code) return 0; } } - dprintk("code=%x, rc5=%x, start=%x, toggle=%x, address=%x, " - "instr=%x\n", rc5, org_code, RC5_START(rc5), + dprintk("code=%x, rc5=%x, start=%x, toggle=%x, address=%x, instr=%x\n", + rc5, org_code, RC5_START(rc5), RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5)); return rc5; }