From: Maciej W. Rozycki Date: Tue, 22 Feb 2005 21:51:30 +0000 (+0000) Subject: Switch SiByte drivers back to __raw_*() functions. X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=65bda1a95d395c256818d1d8129487a4497b29d8;p=linux-beck.git Switch SiByte drivers back to __raw_*() functions. Signed-off-by: Ralf Baechle --- diff --git a/arch/mips/mm/pg-sb1.c b/arch/mips/mm/pg-sb1.c index 1b6df7133c1e..7a90ea383845 100644 --- a/arch/mips/mm/pg-sb1.c +++ b/arch/mips/mm/pg-sb1.c @@ -214,12 +214,12 @@ void sb1_dma_init(void) int cpu = smp_processor_id(); u64 base_val = CPHYSADDR(&page_descr[cpu]) | V_DM_DSCR_BASE_RINGSZ(1); - bus_writeq(base_val, - (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); - bus_writeq(base_val | M_DM_DSCR_BASE_RESET, - (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); - bus_writeq(base_val | M_DM_DSCR_BASE_ENABL, - (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); + __raw_writeq(base_val, + IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); + __raw_writeq(base_val | M_DM_DSCR_BASE_RESET, + IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); + __raw_writeq(base_val | M_DM_DSCR_BASE_ENABL, + IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); } void clear_page(void *page) @@ -232,16 +232,16 @@ void clear_page(void *page) page_descr[cpu].dscr_a = CPHYSADDR(page) | M_DM_DSCRA_ZERO_MEM | M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT; page_descr[cpu].dscr_b = V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE); - bus_writeq(1, (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT))); + __raw_writeq(1, IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT))); /* * Don't really want to do it this way, but there's no * reliable way to delay completion detection. */ - while (!(bus_readq((void *)(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)) & - M_DM_DSCR_BASE_INTERRUPT)))) + while (!(__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG))) + M_DM_DSCR_BASE_INTERRUPT))) ; - bus_readq((void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); + __raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); } void copy_page(void *to, void *from) @@ -257,16 +257,16 @@ void copy_page(void *to, void *from) page_descr[cpu].dscr_a = CPHYSADDR(to_phys) | M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT; page_descr[cpu].dscr_b = CPHYSADDR(from_phys) | V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE); - bus_writeq(1, (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT))); + __raw_writeq(1, IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT))); /* * Don't really want to do it this way, but there's no * reliable way to delay completion detection. */ - while (!(bus_readq((void *)(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)) & - M_DM_DSCR_BASE_INTERRUPT)))) + while (!(__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)) & + M_DM_DSCR_BASE_INTERRUPT))) ; - bus_readq((void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); + __raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); } #else /* !CONFIG_SIBYTE_DMA_PAGEOPS */ diff --git a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c b/arch/mips/sibyte/sb1250/bcm1250_tbprof.c index dba3d0872e7e..e4dfeb52dcec 100644 --- a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c +++ b/arch/mips/sibyte/sb1250/bcm1250_tbprof.c @@ -65,24 +65,25 @@ static void arm_tb(void) u_int64_t tb_options = M_SCD_TRACE_CFG_FREEZE_FULL; /* Generate an SCD_PERFCNT interrupt in TB_PERIOD Zclks to trigger start of trace. XXX vary sampling period */ - bus_writeq(0, IOADDR(A_SCD_PERF_CNT_1)); - scdperfcnt = bus_readq(IOADDR(A_SCD_PERF_CNT_CFG)); + __raw_writeq(0, IOADDR(A_SCD_PERF_CNT_1)); + scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG)); /* Unfortunately, in Pass 2 we must clear all counters to knock down a previous interrupt request. This means that bus profiling requires ALL of the SCD perf counters. */ - bus_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) | // keep counters 0,2,3 as is - M_SPC_CFG_ENABLE | // enable counting - M_SPC_CFG_CLEAR | // clear all counters - V_SPC_CFG_SRC1(1), // counter 1 counts cycles - IOADDR(A_SCD_PERF_CNT_CFG)); - bus_writeq(next, IOADDR(A_SCD_PERF_CNT_1)); + __raw_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) | + // keep counters 0,2,3 as is + M_SPC_CFG_ENABLE | // enable counting + M_SPC_CFG_CLEAR | // clear all counters + V_SPC_CFG_SRC1(1), // counter 1 counts cycles + IOADDR(A_SCD_PERF_CNT_CFG)); + __raw_writeq(next, IOADDR(A_SCD_PERF_CNT_1)); /* Reset the trace buffer */ - bus_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG)); + __raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG)); #if 0 && defined(M_SCD_TRACE_CFG_FORCECNT) /* XXXKW may want to expose control to the data-collector */ tb_options |= M_SCD_TRACE_CFG_FORCECNT; #endif - bus_writeq(tb_options, IOADDR(A_SCD_TRACE_CFG)); + __raw_writeq(tb_options, IOADDR(A_SCD_TRACE_CFG)); sbp.tb_armed = 1; } @@ -94,23 +95,30 @@ static irqreturn_t sbprof_tb_intr(int irq, void *dev_id, struct pt_regs *regs) /* XXX should use XKPHYS to make writes bypass L2 */ u_int64_t *p = sbp.sbprof_tbbuf[sbp.next_tb_sample++]; /* Read out trace */ - bus_writeq(M_SCD_TRACE_CFG_START_READ, IOADDR(A_SCD_TRACE_CFG)); + __raw_writeq(M_SCD_TRACE_CFG_START_READ, + IOADDR(A_SCD_TRACE_CFG)); __asm__ __volatile__ ("sync" : : : "memory"); /* Loop runs backwards because bundles are read out in reverse order */ for (i = 256 * 6; i > 0; i -= 6) { // Subscripts decrease to put bundle in the order // t0 lo, t0 hi, t1 lo, t1 hi, t2 lo, t2 hi - p[i-1] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t2 hi - p[i-2] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t2 lo - p[i-3] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t1 hi - p[i-4] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t1 lo - p[i-5] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t0 hi - p[i-6] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t0 lo + p[i - 1] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); + // read t2 hi + p[i - 2] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); + // read t2 lo + p[i - 3] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); + // read t1 hi + p[i - 4] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); + // read t1 lo + p[i - 5] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); + // read t0 hi + p[i - 6] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); + // read t0 lo } if (!sbp.tb_enable) { DBG(printk(DEVNAME ": tb_intr shutdown\n")); - bus_writeq(M_SCD_TRACE_CFG_RESET, - IOADDR(A_SCD_TRACE_CFG)); + __raw_writeq(M_SCD_TRACE_CFG_RESET, + IOADDR(A_SCD_TRACE_CFG)); sbp.tb_armed = 0; wake_up(&sbp.tb_sync); } else { @@ -119,7 +127,7 @@ static irqreturn_t sbprof_tb_intr(int irq, void *dev_id, struct pt_regs *regs) } else { /* No more trace buffer samples */ DBG(printk(DEVNAME ": tb_intr full\n")); - bus_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG)); + __raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG)); sbp.tb_armed = 0; if (!sbp.tb_enable) { wake_up(&sbp.tb_sync); @@ -153,13 +161,11 @@ int sbprof_zbprof_start(struct file *filp) return -EBUSY; } /* Make sure there isn't a perf-cnt interrupt waiting */ - scdperfcnt = bus_readq(IOADDR(A_SCD_PERF_CNT_CFG)); + scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG)); /* Disable and clear counters, override SRC_1 */ - bus_writeq((scdperfcnt & ~(M_SPC_CFG_SRC1 | M_SPC_CFG_ENABLE)) | - M_SPC_CFG_ENABLE | - M_SPC_CFG_CLEAR | - V_SPC_CFG_SRC1(1), - IOADDR(A_SCD_PERF_CNT_CFG)); + __raw_writeq((scdperfcnt & ~(M_SPC_CFG_SRC1 | M_SPC_CFG_ENABLE)) | + M_SPC_CFG_ENABLE | M_SPC_CFG_CLEAR | V_SPC_CFG_SRC1(1), + IOADDR(A_SCD_PERF_CNT_CFG)); /* We grab this interrupt to prevent others from trying to use it, even though we don't want to service the interrupts @@ -173,55 +179,55 @@ int sbprof_zbprof_start(struct file *filp) /* I need the core to mask these, but the interrupt mapper to pass them through. I am exploiting my knowledge that cp0_status masks out IP[5]. krw */ - bus_writeq(K_INT_MAP_I3, - IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) + - (K_INT_PERF_CNT << 3))); + __raw_writeq(K_INT_MAP_I3, + IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) + + (K_INT_PERF_CNT << 3))); /* Initialize address traps */ - bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_0)); - bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_1)); - bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_2)); - bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_3)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_0)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_1)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_2)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_3)); - bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_0)); - bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_1)); - bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_2)); - bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_3)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_0)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_1)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_2)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_3)); - bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_0)); - bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_1)); - bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_2)); - bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_0)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_1)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_2)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3)); /* Initialize Trace Event 0-7 */ // when interrupt - bus_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0)); - bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1)); - bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2)); - bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_3)); - bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_4)); - bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_5)); - bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_6)); - bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_7)); + __raw_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_3)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_4)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_5)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_6)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_7)); /* Initialize Trace Sequence 0-7 */ // Start on event 0 (interrupt) - bus_writeq(V_SCD_TRSEQ_FUNC_START | 0x0fff, - IOADDR(A_SCD_TRACE_SEQUENCE_0)); + __raw_writeq(V_SCD_TRSEQ_FUNC_START | 0x0fff, + IOADDR(A_SCD_TRACE_SEQUENCE_0)); // dsamp when d used | asamp when a used - bus_writeq(M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE | - K_SCD_TRSEQ_TRIGGER_ALL, - IOADDR(A_SCD_TRACE_SEQUENCE_1)); - bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_2)); - bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_3)); - bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_4)); - bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_5)); - bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_6)); - bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_7)); + __raw_writeq(M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE | + K_SCD_TRSEQ_TRIGGER_ALL, + IOADDR(A_SCD_TRACE_SEQUENCE_1)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_2)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_3)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_4)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_5)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_6)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_7)); /* Now indicate the PERF_CNT interrupt as a trace-relevant interrupt */ - bus_writeq((1ULL << K_INT_PERF_CNT), - IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_TRACE))); + __raw_writeq(1ULL << K_INT_PERF_CNT, + IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_TRACE))); arm_tb(); diff --git a/arch/mips/sibyte/sb1250/bus_watcher.c b/arch/mips/sibyte/sb1250/bus_watcher.c index 1a97e3127aeb..482dee054e68 100644 --- a/arch/mips/sibyte/sb1250/bus_watcher.c +++ b/arch/mips/sibyte/sb1250/bus_watcher.c @@ -189,7 +189,7 @@ static irqreturn_t sibyte_bw_int(int irq, void *data, struct pt_regs *regs) for (i=0; i<256*6; i++) printk("%016llx\n", - (unsigned long long)bus_readq(IOADDR(A_SCD_TRACE_READ))); + (long long)__raw_readq(IOADDR(A_SCD_TRACE_READ))); csr_out32(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG)); csr_out32(M_SCD_TRACE_CFG_START, IOADDR(A_SCD_TRACE_CFG)); diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c index 2725b263cced..a62cba9f32ba 100644 --- a/arch/mips/sibyte/sb1250/irq.c +++ b/arch/mips/sibyte/sb1250/irq.c @@ -96,11 +96,11 @@ void sb1250_mask_irq(int cpu, int irq) u64 cur_ints; spin_lock_irqsave(&sb1250_imr_lock, flags); - cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(cpu) + - R_IMR_INTERRUPT_MASK)); + cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); cur_ints |= (((u64) 1) << irq); - __bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + - R_IMR_INTERRUPT_MASK)); + ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); spin_unlock_irqrestore(&sb1250_imr_lock, flags); } @@ -110,11 +110,11 @@ void sb1250_unmask_irq(int cpu, int irq) u64 cur_ints; spin_lock_irqsave(&sb1250_imr_lock, flags); - cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(cpu) + - R_IMR_INTERRUPT_MASK)); + cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); cur_ints &= ~(((u64) 1) << irq); - __bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + - R_IMR_INTERRUPT_MASK)); + ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); spin_unlock_irqrestore(&sb1250_imr_lock, flags); } @@ -149,23 +149,23 @@ static void sb1250_set_affinity(unsigned int irq, unsigned long mask) /* Swizzle each CPU's IMR (but leave the IP selection alone) */ old_cpu = sb1250_irq_owner[irq]; - cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(old_cpu) + - R_IMR_INTERRUPT_MASK)); + cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(old_cpu) + + R_IMR_INTERRUPT_MASK)); int_on = !(cur_ints & (((u64) 1) << irq)); if (int_on) { /* If it was on, mask it */ cur_ints |= (((u64) 1) << irq); - __bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(old_cpu) + - R_IMR_INTERRUPT_MASK)); + ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(old_cpu) + + R_IMR_INTERRUPT_MASK)); } sb1250_irq_owner[irq] = cpu; if (int_on) { /* unmask for the new CPU */ - cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(cpu) + - R_IMR_INTERRUPT_MASK)); + cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); cur_ints &= ~(((u64) 1) << irq); - __bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + - R_IMR_INTERRUPT_MASK)); + ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); } spin_unlock(&sb1250_imr_lock); spin_unlock_irqrestore(&desc->lock, flags); @@ -208,8 +208,8 @@ static void ack_sb1250_irq(unsigned int irq) * deliver the interrupts to all CPUs (which makes affinity * changing easier for us) */ - pending = bus_readq(IOADDR(A_IMR_REGISTER(sb1250_irq_owner[irq], - R_IMR_LDT_INTERRUPT))); + pending = __raw_readq(IOADDR(A_IMR_REGISTER(sb1250_irq_owner[irq], + R_IMR_LDT_INTERRUPT))); pending &= ((u64)1 << (irq)); if (pending) { int i; @@ -224,8 +224,8 @@ static void ack_sb1250_irq(unsigned int irq) * Clear for all CPUs so an affinity switch * doesn't find an old status */ - bus_writeq(pending, - IOADDR(A_IMR_REGISTER(cpu, + __raw_writeq(pending, + IOADDR(A_IMR_REGISTER(cpu, R_IMR_LDT_INTERRUPT_CLR))); } @@ -340,12 +340,14 @@ void __init arch_init_irq(void) /* Default everything to IP2 */ for (i = 0; i < SB1250_NR_IRQS; i++) { /* was I0 */ - bus_writeq(IMR_IP2_VAL, - IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) + - (i << 3))); - bus_writeq(IMR_IP2_VAL, - IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) + - (i << 3))); + __raw_writeq(IMR_IP2_VAL, + IOADDR(A_IMR_REGISTER(0, + R_IMR_INTERRUPT_MAP_BASE) + + (i << 3))); + __raw_writeq(IMR_IP2_VAL, + IOADDR(A_IMR_REGISTER(1, + R_IMR_INTERRUPT_MAP_BASE) + + (i << 3))); } init_sb1250_irqs(); @@ -355,23 +357,23 @@ void __init arch_init_irq(void) * inter-cpu messages */ /* Was I1 */ - bus_writeq(IMR_IP3_VAL, - IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) + - (K_INT_MBOX_0 << 3))); - bus_writeq(IMR_IP3_VAL, - IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) + - (K_INT_MBOX_0 << 3))); + __raw_writeq(IMR_IP3_VAL, + IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) + + (K_INT_MBOX_0 << 3))); + __raw_writeq(IMR_IP3_VAL, + IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) + + (K_INT_MBOX_0 << 3))); /* Clear the mailboxes. The firmware may leave them dirty */ - bus_writeq(0xffffffffffffffffULL, - IOADDR(A_IMR_REGISTER(0, R_IMR_MAILBOX_CLR_CPU))); - bus_writeq(0xffffffffffffffffULL, - IOADDR(A_IMR_REGISTER(1, R_IMR_MAILBOX_CLR_CPU))); + __raw_writeq(0xffffffffffffffffULL, + IOADDR(A_IMR_REGISTER(0, R_IMR_MAILBOX_CLR_CPU))); + __raw_writeq(0xffffffffffffffffULL, + IOADDR(A_IMR_REGISTER(1, R_IMR_MAILBOX_CLR_CPU))); /* Mask everything except the mailbox registers for both cpus */ tmp = ~((u64) 0) ^ (((u64) 1) << K_INT_MBOX_0); - bus_writeq(tmp, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MASK))); - bus_writeq(tmp, IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MASK))); + __raw_writeq(tmp, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MASK))); + __raw_writeq(tmp, IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MASK))); sb1250_steal_irq(K_INT_MBOX_0); @@ -396,12 +398,14 @@ void __init arch_init_irq(void) sb1250_duart_present[kgdb_port] = 0; #endif /* Setup uart 1 settings, mapper */ - bus_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port))); + __raw_writeq(M_DUART_IMR_BRK, + IOADDR(A_DUART_IMRREG(kgdb_port))); sb1250_steal_irq(kgdb_irq); - bus_writeq(IMR_IP6_VAL, - IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) + - (kgdb_irq<<3))); + __raw_writeq(IMR_IP6_VAL, + IOADDR(A_IMR_REGISTER(0, + R_IMR_INTERRUPT_MAP_BASE) + + (kgdb_irq << 3))); sb1250_unmask_irq(0, kgdb_irq); } #endif diff --git a/arch/mips/sibyte/sb1250/setup.c b/arch/mips/sibyte/sb1250/setup.c index f8c605be96c7..df2e266c700c 100644 --- a/arch/mips/sibyte/sb1250/setup.c +++ b/arch/mips/sibyte/sb1250/setup.c @@ -153,7 +153,7 @@ void sb1250_setup(void) int bad_config = 0; sb1_pass = read_c0_prid() & 0xff; - sys_rev = bus_readq(IOADDR(A_SCD_SYSTEM_REVISION)); + sys_rev = __raw_readq(IOADDR(A_SCD_SYSTEM_REVISION)); soc_type = SYS_SOC_TYPE(sys_rev); soc_pass = G_SYS_REVISION(sys_rev); @@ -162,7 +162,7 @@ void sb1250_setup(void) machine_restart(NULL); } - plldiv = G_SYS_PLL_DIV(bus_readq(IOADDR(A_SCD_SYSTEM_CFG))); + plldiv = G_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG))); zbbus_mhz = ((plldiv >> 1) * 50) + ((plldiv & 1) * 25); prom_printf("Broadcom SiByte %s %s @ %d MHz (SB1 rev %d)\n", diff --git a/arch/mips/sibyte/sb1250/smp.c b/arch/mips/sibyte/sb1250/smp.c index be91b3990952..f859db02d3c9 100644 --- a/arch/mips/sibyte/sb1250/smp.c +++ b/arch/mips/sibyte/sb1250/smp.c @@ -29,18 +29,18 @@ #include static void *mailbox_set_regs[] = { - (void *)IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_SET_CPU), - (void *)IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_SET_CPU) + IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_SET_CPU), + IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_SET_CPU) }; static void *mailbox_clear_regs[] = { - (void *)IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CLR_CPU), - (void *)IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CLR_CPU) + IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CLR_CPU), + IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CLR_CPU) }; static void *mailbox_regs[] = { - (void *)IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CPU), - (void *)IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CPU) + IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CPU), + IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CPU) }; /* @@ -73,7 +73,7 @@ void sb1250_smp_finish(void) */ void core_send_ipi(int cpu, unsigned int action) { - bus_writeq((((u64)action) << 48), mailbox_set_regs[cpu]); + __raw_writeq((((u64)action) << 48), mailbox_set_regs[cpu]); } void sb1250_mailbox_interrupt(struct pt_regs *regs) @@ -83,10 +83,10 @@ void sb1250_mailbox_interrupt(struct pt_regs *regs) kstat_this_cpu.irqs[K_INT_MBOX_0]++; /* Load the mailbox register to figure out what we're supposed to do */ - action = (__bus_readq(mailbox_regs[cpu]) >> 48) & 0xffff; + action = (____raw_readq(mailbox_regs[cpu]) >> 48) & 0xffff; /* Clear the mailbox to clear the interrupt */ - __bus_writeq(((u64)action) << 48, mailbox_clear_regs[cpu]); + ____raw_writeq(((u64)action) << 48, mailbox_clear_regs[cpu]); /* * Nothing to do for SMP_RESCHEDULE_YOURSELF; returning from the diff --git a/arch/mips/sibyte/sb1250/time.c b/arch/mips/sibyte/sb1250/time.c index 8b4c848c907b..0ffbc835b116 100644 --- a/arch/mips/sibyte/sb1250/time.c +++ b/arch/mips/sibyte/sb1250/time.c @@ -67,24 +67,24 @@ void sb1250_time_init(void) sb1250_mask_irq(cpu, irq); /* Map the timer interrupt to ip[4] of this cpu */ - bus_writeq(IMR_IP4_VAL, - IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) + - (irq << 3))); + __raw_writeq(IMR_IP4_VAL, + IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) + + (irq << 3))); /* the general purpose timer ticks at 1 Mhz independent if the rest of the system */ /* Disable the timer and set up the count */ - bus_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG))); + __raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG))); #ifdef CONFIG_SIMULATION - bus_writeq(50000 / HZ, - IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT))); + __raw_writeq(50000 / HZ, + IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT))); #else - bus_writeq(1000000/HZ, - IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT))); + __raw_writeq(1000000 / HZ, + IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT))); #endif /* Set the timer running */ - bus_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, - IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG))); + __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, + IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG))); sb1250_unmask_irq(cpu, irq); sb1250_steal_irq(irq); @@ -105,8 +105,8 @@ void sb1250_timer_interrupt(struct pt_regs *regs) int irq = K_INT_TIMER_0 + cpu; /* Reset the timer */ - __bus_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, - IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG))); + ____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, + IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG))); /* * CPU 0 handles the global timer interrupt job @@ -130,7 +130,7 @@ void sb1250_timer_interrupt(struct pt_regs *regs) unsigned long sb1250_gettimeoffset(void) { unsigned long count = - bus_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT))); + __raw_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT))); return 1000000/HZ - count; } diff --git a/arch/mips/sibyte/swarm/rtc_m41t81.c b/arch/mips/sibyte/swarm/rtc_m41t81.c index a686bb716ec6..5b4fc26c1b36 100644 --- a/arch/mips/sibyte/swarm/rtc_m41t81.c +++ b/arch/mips/sibyte/swarm/rtc_m41t81.c @@ -82,59 +82,60 @@ #define M41T81REG_SQW 0x13 /* square wave register */ #define M41T81_CCR_ADDRESS 0x68 -#define SMB_CSR(reg) ((u8 *) (IOADDR(A_SMB_REGISTER(1, reg)))) + +#define SMB_CSR(reg) IOADDR(A_SMB_REGISTER(1, reg)) static int m41t81_read(uint8_t addr) { - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - bus_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD)); - bus_writeq((V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR1BYTE), - SMB_CSR(R_SMB_START)); + __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD)); + __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR1BYTE, + SMB_CSR(R_SMB_START)); - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - bus_writeq((V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE), - SMB_CSR(R_SMB_START)); + __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE, + SMB_CSR(R_SMB_START)); - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { + if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { /* Clear error bit by writing a 1 */ - bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); + __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); return -1; } - return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff); + return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff); } static int m41t81_write(uint8_t addr, int b) { - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - bus_writeq((addr & 0xFF), SMB_CSR(R_SMB_CMD)); - bus_writeq((b & 0xff), SMB_CSR(R_SMB_DATA)); - bus_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR2BYTE, - SMB_CSR(R_SMB_START)); + __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD)); + __raw_writeq(b & 0xff, SMB_CSR(R_SMB_DATA)); + __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR2BYTE, + SMB_CSR(R_SMB_START)); - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { + if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { /* Clear error bit by writing a 1 */ - bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); + __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); return -1; } /* read the same byte again to make sure it is written */ - bus_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE, - SMB_CSR(R_SMB_START)); + __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE, + SMB_CSR(R_SMB_START)); - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; return 0; diff --git a/arch/mips/sibyte/swarm/rtc_xicor1241.c b/arch/mips/sibyte/swarm/rtc_xicor1241.c index 981d21f16e64..d9ff9323f24e 100644 --- a/arch/mips/sibyte/swarm/rtc_xicor1241.c +++ b/arch/mips/sibyte/swarm/rtc_xicor1241.c @@ -57,52 +57,52 @@ #define X1241_CCR_ADDRESS 0x6F -#define SMB_CSR(reg) ((u8 *) (IOADDR(A_SMB_REGISTER(1, reg)))) +#define SMB_CSR(reg) IOADDR(A_SMB_REGISTER(1, reg)) static int xicor_read(uint8_t addr) { - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - bus_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD)); - bus_writeq((addr & 0xff), SMB_CSR(R_SMB_DATA)); - bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE), - SMB_CSR(R_SMB_START)); + __raw_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD)); + __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_DATA)); + __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE, + SMB_CSR(R_SMB_START)); - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE), - SMB_CSR(R_SMB_START)); + __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE, + SMB_CSR(R_SMB_START)); - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { + if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { /* Clear error bit by writing a 1 */ - bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); + __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); return -1; } - return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff); + return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff); } static int xicor_write(uint8_t addr, int b) { - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - bus_writeq(addr, SMB_CSR(R_SMB_CMD)); - bus_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA)); - bus_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE, - SMB_CSR(R_SMB_START)); + __raw_writeq(addr, SMB_CSR(R_SMB_CMD)); + __raw_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA)); + __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE, + SMB_CSR(R_SMB_START)); - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { + if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { /* Clear error bit by writing a 1 */ - bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); + __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); return -1; } else { return 0; diff --git a/arch/mips/sibyte/swarm/time.c b/arch/mips/sibyte/swarm/time.c index c1f1a9defeeb..97c73c793c35 100644 --- a/arch/mips/sibyte/swarm/time.c +++ b/arch/mips/sibyte/swarm/time.c @@ -79,48 +79,48 @@ static unsigned int usec_bias = 0; static int xicor_read(uint8_t addr) { - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - bus_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD)); - bus_writeq((addr & 0xff), SMB_CSR(R_SMB_DATA)); - bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE), - SMB_CSR(R_SMB_START)); + __raw_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD)); + __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_DATA)); + __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE, + SMB_CSR(R_SMB_START)); - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE), - SMB_CSR(R_SMB_START)); + __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE, + SMB_CSR(R_SMB_START)); - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { + if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { /* Clear error bit by writing a 1 */ - bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); + __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); return -1; } - return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff); + return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff); } static int xicor_write(uint8_t addr, int b) { - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - bus_writeq(addr, SMB_CSR(R_SMB_CMD)); - bus_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA)); - bus_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE, - SMB_CSR(R_SMB_START)); + __raw_writeq(addr, SMB_CSR(R_SMB_CMD)); + __raw_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA)); + __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE, + SMB_CSR(R_SMB_START)); - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { + if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { /* Clear error bit by writing a 1 */ - bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); + __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); return -1; } else { return 0; @@ -228,8 +228,8 @@ void __init swarm_time_init(void) /* Establish communication with the Xicor 1241 RTC */ /* XXXKW how do I share the SMBus with the I2C subsystem? */ - bus_writeq(K_SMB_FREQ_400KHZ, SMB_CSR(R_SMB_FREQ)); - bus_writeq(0, SMB_CSR(R_SMB_CONTROL)); + __raw_writeq(K_SMB_FREQ_400KHZ, SMB_CSR(R_SMB_FREQ)); + __raw_writeq(0, SMB_CSR(R_SMB_CONTROL)); if ((status = xicor_read(X1241REG_SR_RTCF)) < 0) { printk("x1241: couldn't detect on SWARM SMBus 1\n"); diff --git a/include/asm-mips/sibyte/sb1250.h b/include/asm-mips/sibyte/sb1250.h index d62da4e2dd36..177747ad7a59 100644 --- a/include/asm-mips/sibyte/sb1250.h +++ b/include/asm-mips/sibyte/sb1250.h @@ -58,6 +58,6 @@ extern void prom_printf(char *fmt, ...); #endif -#define IOADDR(a) (IO_BASE + (a)) +#define IOADDR(a) ((void *)(IO_BASE + (a))) #endif