From: Steve Longerbeam <slongerbeam@gmail.com>
Date: Wed, 20 Jul 2016 00:03:32 +0000 (-0300)
Subject: [media] media: adv7180: add power pin control
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=65d9e14a659520c554feea8ef17ee3109bd67ebd;p=linux-beck.git

[media] media: adv7180: add power pin control

Some targets control the ADV7180 power pin via a gpio, so add
optional support for "powerdown" pin control.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---

diff --git a/Documentation/devicetree/bindings/media/i2c/adv7180.txt b/Documentation/devicetree/bindings/media/i2c/adv7180.txt
index 0d501154dfb2..4da486f96ff6 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7180.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adv7180.txt
@@ -15,6 +15,11 @@ Required Properties :
 		"adi,adv7282"
 		"adi,adv7282-m"
 
+Optional Properties :
+- powerdown-gpios: reference to the GPIO connected to the powerdown pin,
+  if any.
+
+
 Example:
 
 	i2c0@1c22000 {
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index c4df15a43d61..92cc54401339 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -187,7 +187,7 @@ comment "Video decoders"
 
 config VIDEO_ADV7180
 	tristate "Analog Devices ADV7180 decoder"
-	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+	depends on GPIOLIB && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
 	---help---
 	  Support for the Analog Devices ADV7180 video decoder.
 
diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c
index cb83ebbe5131..c367ad6f6327 100644
--- a/drivers/media/i2c/adv7180.c
+++ b/drivers/media/i2c/adv7180.c
@@ -26,6 +26,7 @@
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/of.h>
+#include <linux/gpio/consumer.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-event.h>
@@ -213,6 +214,7 @@ struct adv7180_state {
 	struct media_pad	pad;
 	struct mutex		mutex; /* mutual excl. when accessing chip */
 	int			irq;
+	struct gpio_desc	*pwdn_gpio;
 	v4l2_std_id		curr_norm;
 	bool			powered;
 	bool			streaming;
@@ -463,6 +465,19 @@ static int adv7180_g_std(struct v4l2_subdev *sd, v4l2_std_id *norm)
 	return 0;
 }
 
+static void adv7180_set_power_pin(struct adv7180_state *state, bool on)
+{
+	if (!state->pwdn_gpio)
+		return;
+
+	if (on) {
+		gpiod_set_value_cansleep(state->pwdn_gpio, 0);
+		usleep_range(5000, 10000);
+	} else {
+		gpiod_set_value_cansleep(state->pwdn_gpio, 1);
+	}
+}
+
 static int adv7180_set_power(struct adv7180_state *state, bool on)
 {
 	u8 val;
@@ -1210,6 +1225,8 @@ static int init_device(struct adv7180_state *state)
 
 	mutex_lock(&state->mutex);
 
+	adv7180_set_power_pin(state, true);
+
 	adv7180_write(state, ADV7180_REG_PWR_MAN, ADV7180_PWR_MAN_RES);
 	usleep_range(5000, 10000);
 
@@ -1279,6 +1296,14 @@ static int adv7180_probe(struct i2c_client *client,
 	state->field = V4L2_FIELD_INTERLACED;
 	state->chip_info = (struct adv7180_chip_info *)id->driver_data;
 
+	state->pwdn_gpio = devm_gpiod_get_optional(&client->dev, "powerdown",
+						   GPIOD_OUT_HIGH);
+	if (IS_ERR(state->pwdn_gpio)) {
+		ret = PTR_ERR(state->pwdn_gpio);
+		v4l_err(client, "request for power pin failed: %d\n", ret);
+		return ret;
+	}
+
 	if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) {
 		state->csi_client = i2c_new_dummy(client->adapter,
 				ADV7180_DEFAULT_CSI_I2C_ADDR);
@@ -1370,6 +1395,8 @@ static int adv7180_remove(struct i2c_client *client)
 	if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2)
 		i2c_unregister_device(state->csi_client);
 
+	adv7180_set_power_pin(state, false);
+
 	mutex_destroy(&state->mutex);
 
 	return 0;