From: Kunihiko Hayashi Date: Thu, 6 Jul 2017 06:54:23 +0000 (+0900) Subject: pinctrl: uniphier: fix USB3 pin assignment for Pro4 X-Git-Tag: v4.13-rc5~22^2~6 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=65ff135b4f748f7d5f0d6a21b860e88a0d1fb7c5;p=karo-tx-linux.git pinctrl: uniphier: fix USB3 pin assignment for Pro4 According to pinctrl assignment for Pro4, each definition of USB#2 and USB#3 are as follows. 184: USB2VBUS 185: USB2OD 186: USB2ID 187: USB3VBUS 188: USB3OD USB#2 has an additional pin "USB2ID", but the chip doesn't use this pin while in host-mode. Considering this pin, the pin definitions for USB#3 should be {187, 188}. Signed-off-by: Kunihiko Hayashi Acked-by: Masahiro Yamada Signed-off-by: Linus Walleij --- diff --git a/drivers/pinctrl/uniphier/pinctrl-uniphier-pro4.c b/drivers/pinctrl/uniphier/pinctrl-uniphier-pro4.c index a433a306a2d0..c75e094b2d90 100644 --- a/drivers/pinctrl/uniphier/pinctrl-uniphier-pro4.c +++ b/drivers/pinctrl/uniphier/pinctrl-uniphier-pro4.c @@ -1084,7 +1084,7 @@ static const unsigned usb1_pins[] = {182, 183}; static const int usb1_muxvals[] = {0, 0}; static const unsigned usb2_pins[] = {184, 185}; static const int usb2_muxvals[] = {0, 0}; -static const unsigned usb3_pins[] = {186, 187}; +static const unsigned usb3_pins[] = {187, 188}; static const int usb3_muxvals[] = {0, 0}; static const unsigned port_range0_pins[] = { 300, 301, 302, 303, 304, 305, 306, 307, /* PORT0x */