From: Ivan Vecera Date: Mon, 6 Oct 2014 17:02:37 +0000 (+0200) Subject: bna: allow transmit tagged frames X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=6654cf60ab888170693084a06dfb7c00977ad964;p=linux-beck.git bna: allow transmit tagged frames When Tx VLAN offloading is disabled frames with size ~ MTU are not transmitted as the driver does not account 4 bytes of VLAN header added by stack. It should use VLAN_ETH_HLEN instead of ETH_HLEN. The second problem is with newer BNA chips (BNA 1860). These chips filter out any VLAN tagged frames in Tx path. This is a problem when Tx VLAN offloading is disabled and frames are tagged by stack. Older chips like 1010/1020 are not affected as they probably don't do such filtering. Cc: Rasesh Mody Signed-off-by: Ivan Vecera Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/brocade/bna/bna_tx_rx.c b/drivers/net/ethernet/brocade/bna/bna_tx_rx.c index 85e63546abe3..9949bd9d54cb 100644 --- a/drivers/net/ethernet/brocade/bna/bna_tx_rx.c +++ b/drivers/net/ethernet/brocade/bna/bna_tx_rx.c @@ -3410,7 +3410,7 @@ bna_bfi_tx_enet_start(struct bna_tx *tx) cfg_req->tx_cfg.vlan_mode = BFI_ENET_TX_VLAN_WI; cfg_req->tx_cfg.vlan_id = htons((u16)tx->txf_vlan_id); - cfg_req->tx_cfg.admit_tagged_frame = BNA_STATUS_T_DISABLED; + cfg_req->tx_cfg.admit_tagged_frame = BNA_STATUS_T_ENABLED; cfg_req->tx_cfg.apply_vlan_filter = BNA_STATUS_T_DISABLED; bfa_msgq_cmd_set(&tx->msgq_cmd, NULL, NULL, diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c index ffc92a41d75b..153cafac323c 100644 --- a/drivers/net/ethernet/brocade/bna/bnad.c +++ b/drivers/net/ethernet/brocade/bna/bnad.c @@ -2864,7 +2864,7 @@ bnad_txq_wi_prepare(struct bnad *bnad, struct bna_tcb *tcb, txqent->hdr.wi.opcode = htons(BNA_TXQ_WI_SEND); txqent->hdr.wi.lso_mss = 0; - if (unlikely(skb->len > (bnad->netdev->mtu + ETH_HLEN))) { + if (unlikely(skb->len > (bnad->netdev->mtu + VLAN_ETH_HLEN))) { BNAD_UPDATE_CTR(bnad, tx_skb_non_tso_too_long); return -EINVAL; }