From: Laurent Pinchart Date: Sat, 24 Sep 2011 13:46:55 +0000 (-0300) Subject: [media] uvcvideo: Add UVC timestamps support X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=66847ef013cc4ed3ae519360e7e4cbf531465ae8;p=mv-sheeva.git [media] uvcvideo: Add UVC timestamps support UVC devices transmit a device timestamp along with video frames. Convert the timestamp to a host timestamp and use it to fill the V4L2 buffer timestamp field. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c index 268be579aa7..518f77d3a4d 100644 --- a/drivers/media/video/uvc/uvc_queue.c +++ b/drivers/media/video/uvc/uvc_queue.c @@ -104,10 +104,22 @@ static void uvc_buffer_queue(struct vb2_buffer *vb) spin_unlock_irqrestore(&queue->irqlock, flags); } +static int uvc_buffer_finish(struct vb2_buffer *vb) +{ + struct uvc_video_queue *queue = vb2_get_drv_priv(vb->vb2_queue); + struct uvc_streaming *stream = + container_of(queue, struct uvc_streaming, queue); + struct uvc_buffer *buf = container_of(vb, struct uvc_buffer, buf); + + uvc_video_clock_update(stream, &vb->v4l2_buf, buf); + return 0; +} + static struct vb2_ops uvc_queue_qops = { .queue_setup = uvc_queue_setup, .buf_prepare = uvc_buffer_prepare, .buf_queue = uvc_buffer_queue, + .buf_finish = uvc_buffer_finish, }; void uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type, diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index 513ba30f8d5..c7e69b8f81c 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -357,6 +357,329 @@ static int uvc_commit_video(struct uvc_streaming *stream, return uvc_set_video_ctrl(stream, probe, 0); } +/* ----------------------------------------------------------------------------- + * Clocks and timestamps + */ + +static void +uvc_video_clock_decode(struct uvc_streaming *stream, struct uvc_buffer *buf, + const __u8 *data, int len) +{ + struct uvc_clock_sample *sample; + unsigned int header_size; + bool has_pts = false; + bool has_scr = false; + unsigned long flags; + struct timespec ts; + u16 host_sof; + u16 dev_sof; + + switch (data[1] & (UVC_STREAM_PTS | UVC_STREAM_SCR)) { + case UVC_STREAM_PTS | UVC_STREAM_SCR: + header_size = 12; + has_pts = true; + has_scr = true; + break; + case UVC_STREAM_PTS: + header_size = 6; + has_pts = true; + break; + case UVC_STREAM_SCR: + header_size = 8; + has_scr = true; + break; + default: + header_size = 2; + break; + } + + /* Check for invalid headers. */ + if (len < header_size) + return; + + /* Extract the timestamps: + * + * - store the frame PTS in the buffer structure + * - if the SCR field is present, retrieve the host SOF counter and + * kernel timestamps and store them with the SCR STC and SOF fields + * in the ring buffer + */ + if (has_pts && buf != NULL) + buf->pts = get_unaligned_le32(&data[2]); + + if (!has_scr) + return; + + /* To limit the amount of data, drop SCRs with an SOF identical to the + * previous one. + */ + dev_sof = get_unaligned_le16(&data[header_size - 2]); + if (dev_sof == stream->clock.last_sof) + return; + + stream->clock.last_sof = dev_sof; + + host_sof = usb_get_current_frame_number(stream->dev->udev); + ktime_get_ts(&ts); + + /* The UVC specification allows device implementations that can't obtain + * the USB frame number to keep their own frame counters as long as they + * match the size and frequency of the frame number associated with USB + * SOF tokens. The SOF values sent by such devices differ from the USB + * SOF tokens by a fixed offset that needs to be estimated and accounted + * for to make timestamp recovery as accurate as possible. + * + * The offset is estimated the first time a device SOF value is received + * as the difference between the host and device SOF values. As the two + * SOF values can differ slightly due to transmission delays, consider + * that the offset is null if the difference is not higher than 10 ms + * (negative differences can not happen and are thus considered as an + * offset). The video commit control wDelay field should be used to + * compute a dynamic threshold instead of using a fixed 10 ms value, but + * devices don't report reliable wDelay values. + * + * See uvc_video_clock_host_sof() for an explanation regarding why only + * the 8 LSBs of the delta are kept. + */ + if (stream->clock.sof_offset == (u16)-1) { + u16 delta_sof = (host_sof - dev_sof) & 255; + if (delta_sof >= 10) + stream->clock.sof_offset = delta_sof; + else + stream->clock.sof_offset = 0; + } + + dev_sof = (dev_sof + stream->clock.sof_offset) & 2047; + + spin_lock_irqsave(&stream->clock.lock, flags); + + sample = &stream->clock.samples[stream->clock.head]; + sample->dev_stc = get_unaligned_le32(&data[header_size - 6]); + sample->dev_sof = dev_sof; + sample->host_sof = host_sof; + sample->host_ts = ts; + + /* Update the sliding window head and count. */ + stream->clock.head = (stream->clock.head + 1) % stream->clock.size; + + if (stream->clock.count < stream->clock.size) + stream->clock.count++; + + spin_unlock_irqrestore(&stream->clock.lock, flags); +} + +static int uvc_video_clock_init(struct uvc_streaming *stream) +{ + struct uvc_clock *clock = &stream->clock; + + spin_lock_init(&clock->lock); + clock->head = 0; + clock->count = 0; + clock->size = 32; + clock->last_sof = -1; + clock->sof_offset = -1; + + clock->samples = kmalloc(clock->size * sizeof(*clock->samples), + GFP_KERNEL); + if (clock->samples == NULL) + return -ENOMEM; + + return 0; +} + +static void uvc_video_clock_cleanup(struct uvc_streaming *stream) +{ + kfree(stream->clock.samples); + stream->clock.samples = NULL; +} + +/* + * uvc_video_clock_host_sof - Return the host SOF value for a clock sample + * + * Host SOF counters reported by usb_get_current_frame_number() usually don't + * cover the whole 11-bits SOF range (0-2047) but are limited to the HCI frame + * schedule window. They can be limited to 8, 9 or 10 bits depending on the host + * controller and its configuration. + * + * We thus need to recover the SOF value corresponding to the host frame number. + * As the device and host frame numbers are sampled in a short interval, the + * difference between their values should be equal to a small delta plus an + * integer multiple of 256 caused by the host frame number limited precision. + * + * To obtain the recovered host SOF value, compute the small delta by masking + * the high bits of the host frame counter and device SOF difference and add it + * to the device SOF value. + */ +static u16 uvc_video_clock_host_sof(const struct uvc_clock_sample *sample) +{ + /* The delta value can be negative. */ + s8 delta_sof; + + delta_sof = (sample->host_sof - sample->dev_sof) & 255; + + return (sample->dev_sof + delta_sof) & 2047; +} + +/* + * uvc_video_clock_update - Update the buffer timestamp + * + * This function converts the buffer PTS timestamp to the host clock domain by + * going through the USB SOF clock domain and stores the result in the V4L2 + * buffer timestamp field. + * + * The relationship between the device clock and the host clock isn't known. + * However, the device and the host share the common USB SOF clock which can be + * used to recover that relationship. + * + * The relationship between the device clock and the USB SOF clock is considered + * to be linear over the clock samples sliding window and is given by + * + * SOF = m * PTS + p + * + * Several methods to compute the slope (m) and intercept (p) can be used. As + * the clock drift should be small compared to the sliding window size, we + * assume that the line that goes through the points at both ends of the window + * is a good approximation. Naming those points P1 and P2, we get + * + * SOF = (SOF2 - SOF1) / (STC2 - STC1) * PTS + * + (SOF1 * STC2 - SOF2 * STC1) / (STC2 - STC1) + * + * or + * + * SOF = ((SOF2 - SOF1) * PTS + SOF1 * STC2 - SOF2 * STC1) / (STC2 - STC1) (1) + * + * to avoid loosing precision in the division. Similarly, the host timestamp is + * computed with + * + * TS = ((TS2 - TS1) * PTS + TS1 * SOF2 - TS2 * SOF1) / (SOF2 - SOF1) (2) + * + * SOF values are coded on 11 bits by USB. We extend their precision with 16 + * decimal bits, leading to a 11.16 coding. + * + * TODO: To avoid surprises with device clock values, PTS/STC timestamps should + * be normalized using the nominal device clock frequency reported through the + * UVC descriptors. + * + * Both the PTS/STC and SOF counters roll over, after a fixed but device + * specific amount of time for PTS/STC and after 2048ms for SOF. As long as the + * sliding window size is smaller than the rollover period, differences computed + * on unsigned integers will produce the correct result. However, the p term in + * the linear relations will be miscomputed. + * + * To fix the issue, we subtract a constant from the PTS and STC values to bring + * PTS to half the 32 bit STC range. The sliding window STC values then fit into + * the 32 bit range without any rollover. + * + * Similarly, we add 2048 to the device SOF values to make sure that the SOF + * computed by (1) will never be smaller than 0. This offset is then compensated + * by adding 2048 to the SOF values used in (2). However, this doesn't prevent + * rollovers between (1) and (2): the SOF value computed by (1) can be slightly + * lower than 4096, and the host SOF counters can have rolled over to 2048. This + * case is handled by subtracting 2048 from the SOF value if it exceeds the host + * SOF value at the end of the sliding window. + * + * Finally we subtract a constant from the host timestamps to bring the first + * timestamp of the sliding window to 1s. + */ +void uvc_video_clock_update(struct uvc_streaming *stream, + struct v4l2_buffer *v4l2_buf, + struct uvc_buffer *buf) +{ + struct uvc_clock *clock = &stream->clock; + struct uvc_clock_sample *first; + struct uvc_clock_sample *last; + unsigned long flags; + struct timespec ts; + u32 delta_stc; + u32 y1, y2; + u32 x1, x2; + u32 mean; + u32 sof; + u32 div; + u32 rem; + u64 y; + + spin_lock_irqsave(&clock->lock, flags); + + if (clock->count < clock->size) + goto done; + + first = &clock->samples[clock->head]; + last = &clock->samples[(clock->head - 1) % clock->size]; + + /* First step, PTS to SOF conversion. */ + delta_stc = buf->pts - (1UL << 31); + x1 = first->dev_stc - delta_stc; + x2 = last->dev_stc - delta_stc; + y1 = (first->dev_sof + 2048) << 16; + y2 = (last->dev_sof + 2048) << 16; + + if (y2 < y1) + y2 += 2048 << 16; + + y = (u64)(y2 - y1) * (1ULL << 31) + (u64)y1 * (u64)x2 + - (u64)y2 * (u64)x1; + y = div_u64(y, x2 - x1); + + sof = y; + + uvc_trace(UVC_TRACE_CLOCK, "%s: PTS %u y %llu.%06llu SOF %u.%06llu " + "(x1 %u x2 %u y1 %u y2 %u SOF offset %u)\n", + stream->dev->name, buf->pts, + y >> 16, div_u64((y & 0xffff) * 1000000, 65536), + sof >> 16, div_u64(((u64)sof & 0xffff) * 1000000LLU, 65536), + x1, x2, y1, y2, clock->sof_offset); + + /* Second step, SOF to host clock conversion. */ + ts = timespec_sub(last->host_ts, first->host_ts); + x1 = (uvc_video_clock_host_sof(first) + 2048) << 16; + x2 = (uvc_video_clock_host_sof(last) + 2048) << 16; + y1 = NSEC_PER_SEC; + y2 = (ts.tv_sec + 1) * NSEC_PER_SEC + ts.tv_nsec; + + if (x2 < x1) + x2 += 2048 << 16; + + /* Interpolated and host SOF timestamps can wrap around at slightly + * different times. Handle this by adding or removing 2048 to or from + * the computed SOF value to keep it close to the SOF samples mean + * value. + */ + mean = (x1 + x2) / 2; + if (mean - (1024 << 16) > sof) + sof += 2048 << 16; + else if (sof > mean + (1024 << 16)) + sof -= 2048 << 16; + + y = (u64)(y2 - y1) * (u64)sof + (u64)y1 * (u64)x2 + - (u64)y2 * (u64)x1; + y = div_u64(y, x2 - x1); + + div = div_u64_rem(y, NSEC_PER_SEC, &rem); + ts.tv_sec = first->host_ts.tv_sec - 1 + div; + ts.tv_nsec = first->host_ts.tv_nsec + rem; + if (ts.tv_nsec >= NSEC_PER_SEC) { + ts.tv_sec++; + ts.tv_nsec -= NSEC_PER_SEC; + } + + uvc_trace(UVC_TRACE_CLOCK, "%s: SOF %u.%06llu y %llu ts %lu.%06lu " + "buf ts %lu.%06lu (x1 %u/%u/%u x2 %u/%u/%u y1 %u y2 %u)\n", + stream->dev->name, + sof >> 16, div_u64(((u64)sof & 0xffff) * 1000000LLU, 65536), + y, ts.tv_sec, ts.tv_nsec / NSEC_PER_USEC, + v4l2_buf->timestamp.tv_sec, v4l2_buf->timestamp.tv_usec, + x1, first->host_sof, first->dev_sof, + x2, last->host_sof, last->dev_sof, y1, y2); + + /* Update the V4L2 buffer. */ + v4l2_buf->timestamp.tv_sec = ts.tv_sec; + v4l2_buf->timestamp.tv_usec = ts.tv_nsec / NSEC_PER_USEC; + +done: + spin_unlock_irqrestore(&stream->clock.lock, flags); +} + /* ------------------------------------------------------------------------ * Stream statistics */ @@ -637,6 +960,7 @@ static int uvc_video_decode_start(struct uvc_streaming *stream, uvc_video_stats_update(stream); } + uvc_video_clock_decode(stream, buf, data, len); uvc_video_stats_decode(stream, data, len); /* Store the payload FID bit and return immediately when the buffer is @@ -1096,6 +1420,8 @@ static void uvc_uninit_video(struct uvc_streaming *stream, int free_buffers) if (free_buffers) uvc_free_urb_buffers(stream); + + uvc_video_clock_cleanup(stream); } /* @@ -1225,6 +1551,10 @@ static int uvc_init_video(struct uvc_streaming *stream, gfp_t gfp_flags) uvc_video_stats_start(stream); + ret = uvc_video_clock_init(stream); + if (ret < 0) + return ret; + if (intf->num_altsetting > 1) { struct usb_host_endpoint *best_ep = NULL; unsigned int best_psize = 3 * 1024; diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h index e4d4b6d0202..e9c19f53e4a 100644 --- a/drivers/media/video/uvc/uvcvideo.h +++ b/drivers/media/video/uvc/uvcvideo.h @@ -329,6 +329,8 @@ struct uvc_buffer { void *mem; unsigned int length; unsigned int bytesused; + + u32 pts; }; #define UVC_QUEUE_DISCONNECTED (1 << 0) @@ -455,6 +457,25 @@ struct uvc_streaming { struct uvc_stats_frame frame; struct uvc_stats_stream stream; } stats; + + /* Timestamps support. */ + struct uvc_clock { + struct uvc_clock_sample { + u32 dev_stc; + u16 dev_sof; + struct timespec host_ts; + u16 host_sof; + } *samples; + + unsigned int head; + unsigned int count; + unsigned int size; + + u16 last_sof; + u16 sof_offset; + + spinlock_t lock; + } clock; }; enum uvc_device_state { @@ -527,6 +548,7 @@ struct uvc_driver { #define UVC_TRACE_STATUS (1 << 9) #define UVC_TRACE_VIDEO (1 << 10) #define UVC_TRACE_STATS (1 << 11) +#define UVC_TRACE_CLOCK (1 << 12) #define UVC_WARN_MINMAX 0 #define UVC_WARN_PROBE_DEF 1 @@ -607,6 +629,9 @@ extern int uvc_probe_video(struct uvc_streaming *stream, struct uvc_streaming_control *probe); extern int uvc_query_ctrl(struct uvc_device *dev, __u8 query, __u8 unit, __u8 intfnum, __u8 cs, void *data, __u16 size); +void uvc_video_clock_update(struct uvc_streaming *stream, + struct v4l2_buffer *v4l2_buf, + struct uvc_buffer *buf); /* Status */ extern int uvc_status_init(struct uvc_device *dev);