From: Javier Martinez Canillas Date: Fri, 13 Nov 2015 04:54:11 +0000 (-0300) Subject: ARM: dts: omap4-panda-es: Use OMAP4_IOPAD pinmux macro X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=67832f527790b9778f4765b23bb4768c5cf8d11c;p=linux-beck.git ARM: dts: omap4-panda-es: Use OMAP4_IOPAD pinmux macro Use the pinmux IOPAD macros to define the register as an offset from the padconf physical address instead of the offset from padconf base. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 2f1dabcc6adf..119f8e657edc 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -34,23 +34,23 @@ /* PandaboardES has external pullups on SCL & SDA */ &dss_hdmi_pins { pinctrl-single,pins = < - 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ - 0x5c (PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */ - 0x5e (PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */ + OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */ + OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */ >; }; &omap4_pmx_core { led_gpio_pins: gpio_led_pmx { pinctrl-single,pins = < - 0xb6 (PIN_OUTPUT | MUX_MODE3) /* gpio_110 */ + OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3) /* gpio_110 */ >; }; }; &led_wkgpio_pins { pinctrl-single,pins = < - 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ + OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ >; };