From: Mika Kuoppala Date: Wed, 15 Mar 2017 15:43:03 +0000 (+0200) Subject: drm/i915: Use ktime to calculate rc0 residency X-Git-Tag: v4.12-rc1~116^2~28^2~23 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=679cb6c1320bc0d4b1572a4cf0988c3bba66becf;p=karo-tx-linux.git drm/i915: Use ktime to calculate rc0 residency We have used cz timestamp register to gain a reference time wrt to residency calculations. The residency counts are in cz clk ticks (333Mhz clock) but for some reason the cz timestamp register gives 100us units. Perhaps for some other usage, the base-ten based values are easier, but in residency calculations raw units would have been the easiest. As there is not much advantage of using base-ten clock through a more costly punit access, take our reference times directly from kernel clock. v2: use ktime (Chris, Ville) Cc: Chris Wilson Cc: Ville Syrjälä Signed-off-by: Mika Kuoppala Reviewed-by: Chris Wilson --- diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 0374e2e41681..6e14c7d089b8 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1323,7 +1323,7 @@ struct vlv_s0ix_state { }; struct intel_rps_ei { - u32 cz_clock; + ktime_t ktime; u32 render_c0; u32 media_c0; }; diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 736c7c4e7901..fcefa45162b1 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -1078,7 +1078,7 @@ static void notify_ring(struct intel_engine_cs *engine) static void vlv_c0_read(struct drm_i915_private *dev_priv, struct intel_rps_ei *ei) { - ei->cz_clock = vlv_punit_read(dev_priv, PUNIT_REG_CZ_TIMESTAMP); + ei->ktime = ktime_get_raw(); ei->render_c0 = I915_READ(VLV_RENDER_C0_COUNT); ei->media_c0 = I915_READ(VLV_MEDIA_C0_COUNT); } @@ -1098,19 +1098,17 @@ static u32 vlv_wa_c0_ei(struct drm_i915_private *dev_priv, u32 pm_iir) return 0; vlv_c0_read(dev_priv, &now); - if (now.cz_clock == 0) - return 0; - if (prev->cz_clock) { + if (prev->ktime) { u64 time, c0; u32 render, media; unsigned int mul; - mul = VLV_CZ_CLOCK_TO_MILLI_SEC * 100; /* scale to threshold% */ + mul = 1000 * 100; /* scale to threshold% */ if (I915_READ(VLV_COUNTER_CONTROL) & VLV_COUNT_RANGE_HIGH) mul <<= 8; - time = now.cz_clock - prev->cz_clock; + time = ktime_us_delta(now.ktime, prev->ktime); time *= dev_priv->czclk_freq; /* Workload can be split between render + media, diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 5d88c35c41cd..04c8f69fcc62 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1140,8 +1140,6 @@ enum skl_disp_power_wells { #define VLV_BIAS_CPU_125_SOC_875 (6 << 2) #define CHV_BIAS_CPU_50_SOC_50 (3 << 2) -#define VLV_CZ_CLOCK_TO_MILLI_SEC 100000 - /* vlv2 north clock has */ #define CCK_FUSE_REG 0x8 #define CCK_FUSE_HPLL_FREQ_MASK 0x3