From: Ying Zhang Date: Fri, 7 Jun 2013 09:25:16 +0000 (+0800) Subject: powerpc/mpc85xx: modify the functionality clear_bss and aligning the end address... X-Git-Tag: v2013.07-rc2~68 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=67ad0d52df4106caacc0c640473d9b3e29ee8eba;p=karo-tx-uboot.git powerpc/mpc85xx: modify the functionality clear_bss and aligning the end address of the BSS There will clear the BSS in the function clear_bss(), the reset address of the BSS started from the __bss_start, and increased by four-byte increments, finally stoped depending on the address is equal to the _bss_end. If the end address __bss_end is not alignment to 4byte, it will be an infinite loop. 1. The reset action stoped depending on the reset address is greater than or equal the end address of the BSS. 2. The end address of the BSS should be 4byte aligned. Because the reset unit is 4 Bytes. This patch is on top of the patch "powerpc/mpc85xx: support application without resetvec segment in the linker script". Signed-off-by: Ying Zhang Signed-off-by: Andy Fleming --- diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 4f0480b768..2657982a45 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -1795,7 +1795,7 @@ clear_bss: stw r0,0(r3) addi r3,r3,4 cmplw 0,r3,r4 - bne 5b + blt 5b 6: mr r3,r9 /* Init Data pointer */ diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds index 4591760e2d..20284ed5a5 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds @@ -92,10 +92,12 @@ SECTIONS */ . |= 0x10; + . = ALIGN(4); __bss_start = .; .bss : { *(.sbss*) *(.bss*) } + . = ALIGN(4); __bss_end = .; }