From: Daniel Vetter Date: Wed, 25 Jan 2017 06:26:43 +0000 (+0100) Subject: drm/kms-helpers: Use recommened kerneldoc for struct member refs X-Git-Tag: v4.11-rc1~83^2~32^2~36 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=6806cdf9aa1c822afd89881e48908315aed18451;p=karo-tx-linux.git drm/kms-helpers: Use recommened kerneldoc for struct member refs I just learned that &struct_name.member_name works and looks pretty even. It doesn't (yet) link to the member directly though, which would be really good for big structures or vfunc tables (where the per-member kerneldoc tends to be long). Also some minor drive-by polish where it makes sense, I read a lot of docs ... v2: Comments from Gustavo. Cc: Jani Nikula Cc: Chris Wilson Rewiewed-by: Gustavo Padovan Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-2-daniel.vetter@ffwll.ch --- diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index d73f6d462ec4..03ac27bafba7 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -458,22 +458,25 @@ mode_fixup(struct drm_atomic_state *state) * Check the state object to see if the requested state is physically possible. * This does all the crtc and connector related computations for an atomic * update and adds any additional connectors needed for full modesets and calls - * down into ->mode_fixup functions of the driver backend. - * - * crtc_state->mode_changed is set when the input mode is changed. - * crtc_state->connectors_changed is set when a connector is added or - * removed from the crtc. - * crtc_state->active_changed is set when crtc_state->active changes, - * which is used for dpms. + * down into &drm_crtc_helper_funcs.mode_fixup and + * &drm_encoder_helper_funcs.mode_fixup or + * &drm_encoder_helper_funcs.atomic_check functions of the driver backend. + * + * &drm_crtc_state.mode_changed is set when the input mode is changed. + * &drm_crtc_state.connectors_changed is set when a connector is added or + * removed from the crtc. &drm_crtc_state.active_changed is set when + * &drm_crtc_state.active changes, which is used for DPMS. * See also: drm_atomic_crtc_needs_modeset() * * IMPORTANT: * - * Drivers which set ->mode_changed (e.g. in their ->atomic_check hooks if a - * plane update can't be done without a full modeset) _must_ call this function - * afterwards after that change. It is permitted to call this function multiple - * times for the same update, e.g. when the ->atomic_check functions depend upon - * the adjusted dotclock for fifo space allocation and watermark computation. + * Drivers which set &drm_crtc_state.mode_changed (e.g. in their + * &drm_plane_helper_funcs.atomic_check hooks if a plane update can't be done + * without a full modeset) _must_ call this function afterwards after that + * change. It is permitted to call this function multiple times for the same + * update, e.g. when the &drm_crtc_helper_funcs.atomic_check functions depend + * upon the adjusted dotclock for fifo space allocation and watermark + * computation. * * RETURNS: * Zero for success or -errno @@ -584,9 +587,10 @@ EXPORT_SYMBOL(drm_atomic_helper_check_modeset); * * Check the state object to see if the requested state is physically possible. * This does all the plane update related checks using by calling into the - * ->atomic_check hooks provided by the driver. + * &drm_crtc_helper_funcs.atomic_check and &drm_plane_helper_funcs.atomic_check + * hooks provided by the driver. * - * It also sets crtc_state->planes_changed to indicate that a crtc has + * It also sets &drm_crtc_state.planes_changed to indicate that a crtc has * updated planes. * * RETURNS: @@ -648,14 +652,15 @@ EXPORT_SYMBOL(drm_atomic_helper_check_planes); * Check the state object to see if the requested state is physically possible. * Only crtcs and planes have check callbacks, so for any additional (global) * checking that a driver needs it can simply wrap that around this function. - * Drivers without such needs can directly use this as their ->atomic_check() - * callback. + * Drivers without such needs can directly use this as their + * &drm_mode_config_funcs.atomic_check callback. * * This just wraps the two parts of the state checking for planes and modeset * state in the default order: First it calls drm_atomic_helper_check_modeset() * and then drm_atomic_helper_check_planes(). The assumption is that the - * ->atomic_check functions depend upon an updated adjusted_mode.clock to - * e.g. properly compute watermarks. + * @drm_plane_helper_funcs.atomic_check and @drm_crtc_helper_funcs.atomic_check + * functions depend upon an updated adjusted_mode.clock to e.g. properly compute + * watermarks. * * RETURNS: * Zero for success or -errno @@ -1125,8 +1130,8 @@ EXPORT_SYMBOL(drm_atomic_helper_wait_for_vblanks); * drm_atomic_helper_commit_tail - commit atomic update to hardware * @old_state: atomic state object with old state structures * - * This is the default implemenation for the ->atomic_commit_tail() hook of the - * &drm_mode_config_helper_funcs vtable. + * This is the default implementation for the + * &drm_mode_config_helper_funcs.atomic_commit_tail hook. * * Note that the default ordering of how the various stages are called is to * match the legacy modeset helper library closest. One peculiarity of that is @@ -1203,8 +1208,8 @@ static void commit_work(struct work_struct *work) * drm_atomic_helper_setup_commit() and related functions. * * Committing the actual hardware state is done through the - * ->atomic_commit_tail() callback of the &drm_mode_config_helper_funcs vtable, - * or it's default implementation drm_atomic_helper_commit_tail(). + * &drm_mode_config_helper_funcs.atomic_commit_tail callback, or it's default + * implementation drm_atomic_helper_commit_tail(). * * RETURNS: * Zero for success or -errno. @@ -1371,14 +1376,15 @@ static void release_crtc_commit(struct completion *completion) * * This function prepares @state to be used by the atomic helper's support for * nonblocking commits. Drivers using the nonblocking commit infrastructure - * should always call this function from their ->atomic_commit hook. + * should always call this function from their + * &drm_mode_config_funcs.atomic_commit hook. * * To be able to use this support drivers need to use a few more helper * functions. drm_atomic_helper_wait_for_dependencies() must be called before * actually committing the hardware state, and for nonblocking commits this call * must be placed in the async worker. See also drm_atomic_helper_swap_state() * and it's stall parameter, for when a driver's commit hooks look at the - * ->state pointers of &struct drm_crtc, &drm_plane or &drm_connector directly. + * &drm_crtc.state, &drm_plane.state or &drm_connector.state pointer directly. * * Completion of the hardware commit step must be signalled using * drm_atomic_helper_commit_hw_done(). After this step the driver is not allowed @@ -1487,8 +1493,7 @@ static struct drm_crtc_commit *preceeding_commit(struct drm_crtc *crtc) * This function waits for all preceeding commits that touch the same CRTC as * @old_state to both be committed to the hardware (as signalled by * drm_atomic_helper_commit_hw_done) and executed by the hardware (as signalled - * by calling drm_crtc_vblank_send_event on the event member of - * &drm_crtc_state). + * by calling drm_crtc_vblank_send_event() on the &drm_crtc_state.event). * * This is part of the atomic helper support for nonblocking commits, see * drm_atomic_helper_setup_commit() for an overview. @@ -1625,8 +1630,9 @@ EXPORT_SYMBOL(drm_atomic_helper_commit_cleanup_done); * @state: atomic state object with new state structures * * This function prepares plane state, specifically framebuffers, for the new - * configuration. If any failure is encountered this function will call - * ->cleanup_fb on any already successfully prepared framebuffer. + * configuration, by calling &drm_plane_helper_funcs.prepare_fb. If any failure + * is encountered this function will call &drm_plane_helper_funcs.cleanup_fb on + * any already successfully prepared framebuffer. * * Returns: * 0 on success, negative error code on failure. @@ -1706,10 +1712,10 @@ static bool plane_crtc_active(const struct drm_plane_state *state) * * Drivers may set the NO_DISABLE_AFTER_MODESET flag in @flags if the relevant * display controllers require to disable a CRTC's planes when the CRTC is - * disabled. This function would skip the ->atomic_disable call for a plane if - * the CRTC of the old plane state needs a modesetting operation. Of course, - * the drivers need to disable the planes in their CRTC disable callbacks - * since no one else would do that. + * disabled. This function would skip the &drm_plane_helper_funcs.atomic_disable + * call for a plane if the CRTC of the old plane state needs a modesetting + * operation. Of course, the drivers need to disable the planes in their CRTC + * disable callbacks since no one else would do that. * * The drm_atomic_helper_commit() default implementation doesn't set the * ACTIVE_ONLY flag to most closely match the behaviour of the legacy helpers. @@ -1872,7 +1878,7 @@ EXPORT_SYMBOL(drm_atomic_helper_commit_planes_on_crtc); * planes. * * It is a bug to call this function without having implemented the - * ->atomic_disable() plane hook. + * &drm_plane_helper_funcs.atomic_disable plane hook. */ void drm_atomic_helper_disable_planes_on_crtc(struct drm_crtc_state *old_crtc_state, @@ -1959,8 +1965,8 @@ EXPORT_SYMBOL(drm_atomic_helper_cleanup_planes); * contains the old state. Also do any other cleanup required with that state. * * @stall must be set when nonblocking commits for this driver directly access - * the ->state pointer of &drm_plane, &drm_crtc or &drm_connector. With the - * current atomic helpers this is almost always the case, since the helpers + * the &drm_plane.state, &drm_crtc.state or &drm_connector.state pointer. With + * the current atomic helpers this is almost always the case, since the helpers * don't pass the right state structures to the callbacks. */ void drm_atomic_helper_swap_state(struct drm_atomic_state *state, @@ -2890,8 +2896,8 @@ EXPORT_SYMBOL(drm_atomic_helper_page_flip_target); * * This is the main helper function provided by the atomic helper framework for * implementing the legacy DPMS connector interface. It computes the new desired - * ->active state for the corresponding CRTC (if the connector is enabled) and - * updates it. + * &drm_crtc_state.active state for the corresponding CRTC (if the connector is + * enabled) and updates it. * * Returns: * Returns 0 on success, negative errno numbers on failure. @@ -2963,11 +2969,11 @@ backoff: EXPORT_SYMBOL(drm_atomic_helper_connector_dpms); /** - * drm_atomic_helper_best_encoder - Helper for &drm_connector_helper_funcs - * ->best_encoder callback + * drm_atomic_helper_best_encoder - Helper for + * &drm_connector_helper_funcs.best_encoder callback * @connector: Connector control structure * - * This is a &drm_connector_helper_funcs ->best_encoder callback helper for + * This is a &drm_connector_helper_funcs.best_encoder callback helper for * connectors that support exactly 1 encoder, statically determined at driver * init time. */ @@ -3001,7 +3007,7 @@ EXPORT_SYMBOL(drm_atomic_helper_best_encoder); */ /** - * drm_atomic_helper_crtc_reset - default ->reset hook for CRTCs + * drm_atomic_helper_crtc_reset - default &drm_crtc_funcs.reset hook for CRTCs * @crtc: drm CRTC * * Resets the atomic state for @crtc by freeing the state pointer (which might @@ -3108,7 +3114,7 @@ void drm_atomic_helper_crtc_destroy_state(struct drm_crtc *crtc, EXPORT_SYMBOL(drm_atomic_helper_crtc_destroy_state); /** - * drm_atomic_helper_plane_reset - default ->reset hook for planes + * drm_atomic_helper_plane_reset - default &drm_plane_funcs.reset hook for planes * @plane: drm plane * * Resets the atomic state for @plane by freeing the state pointer (which might @@ -3212,8 +3218,9 @@ EXPORT_SYMBOL(drm_atomic_helper_plane_destroy_state); * @conn_state: connector state to assign * * Initializes the newly allocated @conn_state and assigns it to - * #connector ->state, usually required when initializing the drivers - * or when called from the ->reset hook. + * the &drm_conector->state pointer of @connector, usually required when + * initializing the drivers or when called from the &drm_connector_funcs.reset + * hook. * * This is useful for drivers that subclass the connector state. */ @@ -3229,7 +3236,7 @@ __drm_atomic_helper_connector_reset(struct drm_connector *connector, EXPORT_SYMBOL(__drm_atomic_helper_connector_reset); /** - * drm_atomic_helper_connector_reset - default ->reset hook for connectors + * drm_atomic_helper_connector_reset - default &drm_connector_funcs.reset hook for connectors * @connector: drm connector * * Resets the atomic state for @connector by freeing the state pointer (which diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 1e281dd42e4b..44ba0e990d6c 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -53,9 +53,9 @@ * configuration on resume with drm_helper_resume_force_mode(). * * Note that this helper library doesn't track the current power state of CRTCs - * and encoders. It can call callbacks like ->dpms() even though the hardware is - * already in the desired state. This deficiency has been fixed in the atomic - * helpers. + * and encoders. It can call callbacks like &drm_encoder_helper_funcs.dpms even + * though the hardware is already in the desired state. This deficiency has been + * fixed in the atomic helpers. * * The driver callbacks are mostly compatible with the atomic modeset helpers, * except for the handling of the primary plane: Atomic helpers require that the @@ -477,12 +477,12 @@ drm_crtc_helper_disable(struct drm_crtc *crtc) * drm_crtc_helper_set_config - set a new config from userspace * @set: mode set configuration * - * The drm_crtc_helper_set_config() helper function implements the set_config - * callback of &struct drm_crtc_funcs for drivers using the legacy CRTC helpers. + * The drm_crtc_helper_set_config() helper function implements the of + * &drm_crtc_funcs.set_config callback for drivers using the legacy CRTC + * helpers. * * It first tries to locate the best encoder for each connector by calling the - * connector ->best_encoder() (&struct drm_connector_helper_funcs) helper - * operation. + * connector @drm_connector_helper_funcs.best_encoder helper operation. * * After locating the appropriate encoders, the helper function will call the * mode_fixup encoder and CRTC helper operations to adjust the requested mode, @@ -493,8 +493,7 @@ drm_crtc_helper_disable(struct drm_crtc *crtc) * * If the adjusted mode is identical to the current mode but changes to the * frame buffer need to be applied, the drm_crtc_helper_set_config() function - * will call the CRTC ->mode_set_base() (&struct drm_crtc_helper_funcs) helper - * operation. + * will call the CRTC &drm_crtc_helper_funcs.mode_set_base helper operation. * * If the adjusted mode differs from the current mode, or if the * ->mode_set_base() helper operation is not provided, the helper function @@ -851,14 +850,15 @@ static int drm_helper_choose_crtc_dpms(struct drm_crtc *crtc) * @connector: affected connector * @mode: DPMS mode * - * The drm_helper_connector_dpms() helper function implements the ->dpms() - * callback of &struct drm_connector_funcs for drivers using the legacy CRTC helpers. + * The drm_helper_connector_dpms() helper function implements the + * &drm_connector_funcs.dpms callback for drivers using the legacy CRTC + * helpers. * * This is the main helper function provided by the CRTC helper framework for * implementing the DPMS connector attribute. It computes the new desired DPMS - * state for all encoders and CRTCs in the output mesh and calls the ->dpms() - * callbacks provided by the driver in &struct drm_crtc_helper_funcs and struct - * &drm_encoder_helper_funcs appropriately. + * state for all encoders and CRTCs in the output mesh and calls the + * &drm_crtc_helper_funcs.dpms and &drm_encoder_helper_funcs.dpms callbacks + * provided by the driver. * * This function is deprecated. New drivers must implement atomic modeset * support, for which this function is unsuitable. Instead drivers should use diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c index 3e6fe82c6d64..68908c1d5ca1 100644 --- a/drivers/gpu/drm/drm_dp_helper.c +++ b/drivers/gpu/drm/drm_dp_helper.c @@ -725,7 +725,7 @@ MODULE_PARM_DESC(dp_aux_i2c_speed_khz, /* * Transfer a single I2C-over-AUX message and handle various error conditions, * retrying the transaction as appropriate. It is assumed that the - * aux->transfer function does not modify anything in the msg other than the + * &drm_dp_aux.transfer function does not modify anything in the msg other than the * reply field. * * Returns bytes transferred on success, or a negative error code on failure. diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 0ab6aaacb7d6..c7fafa175755 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -66,11 +66,11 @@ static DEFINE_MUTEX(kernel_fb_helper_lock); * Teardown is done with drm_fb_helper_fini(). * * At runtime drivers should restore the fbdev console by calling - * drm_fb_helper_restore_fbdev_mode_unlocked() from their ->lastclose callback. - * They should also notify the fb helper code from updates to the output - * configuration by calling drm_fb_helper_hotplug_event(). For easier + * drm_fb_helper_restore_fbdev_mode_unlocked() from their &drm_driver.lastclose + * callback. They should also notify the fb helper code from updates to the + * output configuration by calling drm_fb_helper_hotplug_event(). For easier * integration with the output polling code in drm_crtc_helper.c the modeset - * code provides a ->output_poll_changed callback. + * code provides a &drm_mode_config_funcs.output_poll_changed callback. * * All other functions exported by the fb helper library can be used to * implement the fbdev driver interface by the driver. @@ -79,7 +79,7 @@ static DEFINE_MUTEX(kernel_fb_helper_lock); * hotplug detection using the fbdev helpers. The drm_fb_helper_prepare() * helper must be called first to initialize the minimum required to make * hotplug detection work. Drivers also need to make sure to properly set up - * the dev->mode_config.funcs member. After calling drm_kms_helper_poll_init() + * the &drm_mode_config.funcs member. After calling drm_kms_helper_poll_init() * it is safe to enable interrupts and start processing hotplug events. At the * same time, drivers should initialize all modeset objects such as CRTCs, * encoders and connectors. To finish up the fbdev helper initialization, the @@ -88,9 +88,9 @@ static DEFINE_MUTEX(kernel_fb_helper_lock); * should call drm_fb_helper_single_add_all_connectors() followed by * drm_fb_helper_initial_config(). * - * If &drm_framebuffer_funcs ->dirty is set, the + * If &drm_framebuffer_funcs.dirty is set, the * drm_fb_helper_{cfb,sys}_{write,fillrect,copyarea,imageblit} functions will - * accumulate changes and schedule &drm_fb_helper ->dirty_work to run right + * accumulate changes and schedule &drm_fb_helper.dirty_work to run right * away. This worker then calls the dirty() function ensuring that it will * always run in process context since the fb_*() function could be running in * atomic context. If drm_fb_helper_deferred_io() is used as the deferred_io @@ -247,7 +247,7 @@ static void drm_fb_helper_restore_lut_atomic(struct drm_crtc *crtc) } /** - * drm_fb_helper_debug_enter - implementation for ->fb_debug_enter + * drm_fb_helper_debug_enter - implementation for &fb_ops.fb_debug_enter * @info: fbdev registered by the helper */ int drm_fb_helper_debug_enter(struct fb_info *info) @@ -296,7 +296,7 @@ static struct drm_framebuffer *drm_mode_config_fb(struct drm_crtc *crtc) } /** - * drm_fb_helper_debug_leave - implementation for ->fb_debug_leave + * drm_fb_helper_debug_leave - implementation for &fb_ops.fb_debug_leave * @info: fbdev registered by the helper */ int drm_fb_helper_debug_leave(struct fb_info *info) @@ -445,7 +445,7 @@ static int restore_fbdev_mode(struct drm_fb_helper *fb_helper) * drm_fb_helper_restore_fbdev_mode_unlocked - restore fbdev configuration * @fb_helper: fbcon to restore * - * This should be called from driver's drm ->lastclose callback + * This should be called from driver's drm &drm_driver.lastclose callback * when implementing an fbcon on top of kms using this helper. This ensures that * the user isn't greeted with a black screen when e.g. X dies. * @@ -585,7 +585,7 @@ static void drm_fb_helper_dpms(struct fb_info *info, int dpms_mode) } /** - * drm_fb_helper_blank - implementation for ->fb_blank + * drm_fb_helper_blank - implementation for &fb_ops.fb_blank * @blank: desired blanking state * @info: fbdev registered by the helper */ @@ -912,7 +912,7 @@ static void drm_fb_helper_dirty(struct fb_info *info, u32 x, u32 y, * @info: fb_info struct pointer * @pagelist: list of dirty mmap framebuffer pages * - * This function is used as the &fb_deferred_io ->deferred_io + * This function is used as the &fb_deferred_io.deferred_io * callback function for flushing the fbdev mmap writes. */ void drm_fb_helper_deferred_io(struct fb_info *info, @@ -1103,7 +1103,7 @@ EXPORT_SYMBOL(drm_fb_helper_set_suspend); * due to all the printk activity. * * This function can be called multiple times with the same state since - * &fb_info->state is checked to see if fbdev is running or not before locking. + * &fb_info.state is checked to see if fbdev is running or not before locking. * * Use drm_fb_helper_set_suspend() if you need to take the lock yourself. */ @@ -1181,7 +1181,7 @@ static int setcolreg(struct drm_crtc *crtc, u16 red, u16 green, } /** - * drm_fb_helper_setcmap - implementation for ->fb_setcmap + * drm_fb_helper_setcmap - implementation for &fb_ops.fb_setcmap * @cmap: cmap to set * @info: fbdev registered by the helper */ @@ -1238,7 +1238,7 @@ int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info) EXPORT_SYMBOL(drm_fb_helper_setcmap); /** - * drm_fb_helper_check_var - implementation for ->fb_check_var + * drm_fb_helper_check_var - implementation for &fb_ops.fb_check_var * @var: screeninfo to check * @info: fbdev registered by the helper */ @@ -1338,7 +1338,7 @@ int drm_fb_helper_check_var(struct fb_var_screeninfo *var, EXPORT_SYMBOL(drm_fb_helper_check_var); /** - * drm_fb_helper_set_par - implementation for ->fb_set_par + * drm_fb_helper_set_par - implementation for &fb_ops.fb_set_par * @info: fbdev registered by the helper * * This will let fbcon do the mode init and is called at initialization time by @@ -1422,7 +1422,7 @@ backoff: } /** - * drm_fb_helper_pan_display - implementation for ->fb_pan_display + * drm_fb_helper_pan_display - implementation for &fb_ops.fb_pan_display * @var: updated screen information * @info: fbdev registered by the helper */ @@ -1607,7 +1607,7 @@ static int drm_fb_helper_single_fb_probe(struct drm_fb_helper *fb_helper, * additional constraints need to set up their own limits. * * Drivers should call this (or their equivalent setup code) from their - * ->fb_probe callback. + * &drm_fb_helper_funcs.fb_probe callback. */ void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch, uint32_t depth) @@ -1636,11 +1636,11 @@ EXPORT_SYMBOL(drm_fb_helper_fill_fix); * @fb_height: desired fb height * * Sets up the variable fbdev metainformation from the given fb helper instance - * and the drm framebuffer allocated in fb_helper->fb. + * and the drm framebuffer allocated in &drm_fb_helper.fb. * * Drivers should call this (or their equivalent setup code) from their - * ->fb_probe callback after having allocated the fbdev backing - * storage framebuffer. + * &drm_fb_helper_funcs.fb_probe callback after having allocated the fbdev + * backing storage framebuffer. */ void drm_fb_helper_fill_var(struct fb_info *info, struct drm_fb_helper *fb_helper, uint32_t fb_width, uint32_t fb_height) @@ -2207,9 +2207,9 @@ out: * Note that this also registers the fbdev and so allows userspace to call into * the driver through the fbdev interfaces. * - * This function will call down into the ->fb_probe callback to let - * the driver allocate and initialize the fbdev info structure and the drm - * framebuffer used to back the fbdev. drm_fb_helper_fill_var() and + * This function will call down into the &drm_fb_helper_funcs.fb_probe callback + * to let the driver allocate and initialize the fbdev info structure and the + * drm framebuffer used to back the fbdev. drm_fb_helper_fill_var() and * drm_fb_helper_fill_fix() are provided as helpers to setup simple default * values for the fbdev info structure. * diff --git a/drivers/gpu/drm/drm_plane_helper.c b/drivers/gpu/drm/drm_plane_helper.c index 35d43607a47d..148688fb920a 100644 --- a/drivers/gpu/drm/drm_plane_helper.c +++ b/drivers/gpu/drm/drm_plane_helper.c @@ -39,9 +39,9 @@ * * This helper library has two parts. The first part has support to implement * primary plane support on top of the normal CRTC configuration interface. - * Since the legacy ->set_config interface ties the primary plane together with - * the CRTC state this does not allow userspace to disable the primary plane - * itself. To avoid too much duplicated code use + * Since the legacy &drm_mode_config_funcs.set_config interface ties the primary + * plane together with the CRTC state this does not allow userspace to disable + * the primary plane itself. To avoid too much duplicated code use * drm_plane_helper_check_update() which can be used to enforce the same * restrictions as primary planes had thus. The default primary plane only * expose XRBG8888 and ARGB8888 as valid pixel formats for the attached @@ -384,7 +384,8 @@ EXPORT_SYMBOL(drm_primary_helper_update); * is called in response to a userspace SetPlane operation on the plane with a * NULL framebuffer parameter. It unconditionally fails the disable call with * -EINVAL the only way to disable the primary plane without driver support is - * to disable the entier CRTC. Which does not match the plane ->disable hook. + * to disable the entire CRTC. Which does not match the plane + * &drm_plane_funcs.disable_plane hook. * * Note that some hardware may be able to disable the primary plane without * disabling the whole CRTC. Drivers for such hardware should provide their diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c index 97a32898ef50..060211ac74a1 100644 --- a/drivers/gpu/drm/drm_probe_helper.c +++ b/drivers/gpu/drm/drm_probe_helper.c @@ -43,7 +43,7 @@ * DOC: output probing helper overview * * This library provides some helper code for output probing. It provides an - * implementation of the core connector->fill_modes interface with + * implementation of the core &drm_connector_funcs.fill_modes interface with * drm_helper_probe_single_connector_modes. * * It also provides support for polling connectors with a work item and for @@ -174,9 +174,9 @@ drm_connector_detect(struct drm_connector *connector, bool force) * be added to the connector's probed_modes list, then culled (based on validity * and the @maxX, @maxY parameters) and put into the normal modes list. * - * Intended to be used as a generic implementation of the ->fill_modes() - * @connector vfunc for drivers that use the CRTC helpers for output mode - * filtering and detection. + * Intended to be used as a generic implementation of the + * &drm_connector_funcs.fill_modes() vfunc for drivers that use the CRTC helpers + * for output mode filtering and detection. * * The basic procedure is as follows * @@ -188,7 +188,7 @@ drm_connector_detect(struct drm_connector *connector, bool force) * * - debugfs 'override_edid' (used for testing only) * - firmware EDID (drm_load_edid_firmware()) - * - connector helper ->get_modes() vfunc + * - &drm_connector_helper_funcs.get_modes vfunc * - if the connector status is connector_status_connected, standard * VESA DMT modes up to 1024x768 are automatically added * (drm_add_modes_noedid()) @@ -209,8 +209,8 @@ drm_connector_detect(struct drm_connector *connector, bool force) * (if specified) * - drm_mode_validate_flag() checks the modes againt basic connector * capabilites (interlace_allowed,doublescan_allowed,stereo_allowed) - * - the optional connector ->mode_valid() helper can perform driver and/or - * hardware specific checks + * - the optional &drm_connector_helper_funcs.mode_valid helper can perform + * driver and/or hardware specific checks * * 5. Any mode whose status is not OK is pruned from the connector's modes list, * accompanied by a debug message indicating the reason for the mode's diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h index 9afcd3810785..d066e9491ae3 100644 --- a/include/drm/drm_atomic_helper.h +++ b/include/drm/drm_atomic_helper.h @@ -177,7 +177,8 @@ int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc, * * This iterates over the current state, useful (for example) when applying * atomic state after it has been checked and swapped. To iterate over the - * planes which *will* be attached (for ->atomic_check()) see + * planes which *will* be attached (more useful in code called from + * &drm_mode_config_funcs.atomic_check) see * drm_atomic_crtc_state_for_each_plane(). */ #define drm_atomic_crtc_for_each_plane(plane, crtc) \ @@ -189,8 +190,9 @@ int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc, * @crtc_state: the incoming crtc-state * * Similar to drm_crtc_for_each_plane(), but iterates the planes that will be - * attached if the specified state is applied. Useful during (for example) - * ->atomic_check() operations, to validate the incoming state. + * attached if the specified state is applied. Useful during for example + * in code called from &drm_mode_config_funcs.atomic_check operations, to + * validate the incoming state. */ #define drm_atomic_crtc_state_for_each_plane(plane, crtc_state) \ drm_for_each_plane_mask(plane, (crtc_state)->state->dev, (crtc_state)->plane_mask) @@ -202,8 +204,9 @@ int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc, * @crtc_state: the incoming crtc-state * * Similar to drm_crtc_for_each_plane(), but iterates the planes that will be - * attached if the specified state is applied. Useful during (for example) - * ->atomic_check() operations, to validate the incoming state. + * attached if the specified state is applied. Useful during for example + * in code called from &drm_mode_config_funcs.atomic_check operations, to + * validate the incoming state. * * Compared to just drm_atomic_crtc_state_for_each_plane() this also fills in a * const plane_state. This is useful when a driver just wants to peek at other diff --git a/include/drm/drm_dp_mst_helper.h b/include/drm/drm_dp_mst_helper.h index 27f3e99f55d1..f4b4d154b98e 100644 --- a/include/drm/drm_dp_mst_helper.h +++ b/include/drm/drm_dp_mst_helper.h @@ -493,8 +493,8 @@ struct drm_dp_mst_topology_mgr { int total_pbn; /** - * @qlock: protects @tx_msg_downq, the tx_slots in struct - * &drm_dp_mst_branch and txmsg->state once they are queued + * @qlock: protects @tx_msg_downq, the &drm_dp_mst_branch.txslost and + * &drm_dp_sideband_msg_tx.state once they are queued */ struct mutex qlock; /** @@ -508,8 +508,7 @@ struct drm_dp_mst_topology_mgr { struct mutex payload_lock; /** * @proposed_vcpis: Array of pointers for the new VCPI allocation. The - * VCPI structure itself is embedded into the corresponding - * &drm_dp_mst_port structure. + * VCPI structure itself is &drm_dp_mst_port.vcpi. */ struct drm_dp_vcpi **proposed_vcpis; /** diff --git a/include/drm/drm_flip_work.h b/include/drm/drm_flip_work.h index d387cf06ae05..21c3d512d25c 100644 --- a/include/drm/drm_flip_work.h +++ b/include/drm/drm_flip_work.h @@ -54,7 +54,7 @@ typedef void (*drm_flip_func_t)(struct drm_flip_work *work, void *val); /** * struct drm_flip_task - flip work task * @node: list entry element - * @data: data to pass to work->func + * @data: data to pass to &drm_flip_work.func */ struct drm_flip_task { struct list_head node; diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h index 46f5b349f059..091c42205667 100644 --- a/include/drm/drm_modeset_helper_vtables.h +++ b/include/drm/drm_modeset_helper_vtables.h @@ -111,9 +111,9 @@ struct drm_crtc_helper_funcs { * This callback is used to validate a mode. The parameter mode is the * display mode that userspace requested, adjusted_mode is the mode the * encoders need to be fed with. Note that this is the inverse semantics - * of the meaning for the &drm_encoder and &drm_bridge - * ->mode_fixup() functions. If the CRTC cannot support the requested - * conversion from mode to adjusted_mode it should reject the modeset. + * of the meaning for the &drm_encoder and &drm_bridge_funcs.mode_fixup + * vfunc. If the CRTC cannot support the requested conversion from mode + * to adjusted_mode it should reject the modeset. * * This function is used by both legacy CRTC helpers and atomic helpers. * With atomic helpers it is optional. @@ -134,17 +134,18 @@ struct drm_crtc_helper_funcs { * * Also beware that neither core nor helpers filter modes before * passing them to the driver: While the list of modes that is - * advertised to userspace is filtered using the connector's - * ->mode_valid() callback, neither the core nor the helpers do any - * filtering on modes passed in from userspace when setting a mode. It - * is therefore possible for userspace to pass in a mode that was - * previously filtered out using ->mode_valid() or add a custom mode - * that wasn't probed from EDID or similar to begin with. Even though - * this is an advanced feature and rarely used nowadays, some users rely - * on being able to specify modes manually so drivers must be prepared - * to deal with it. Specifically this means that all drivers need not - * only validate modes in ->mode_valid() but also in ->mode_fixup() to - * make sure invalid modes passed in from userspace are rejected. + * advertised to userspace is filtered using the + * &drm_connector.mode_valid callback, neither the core nor the helpers + * do any filtering on modes passed in from userspace when setting a + * mode. It is therefore possible for userspace to pass in a mode that + * was previously filtered out using &drm_connector.mode_valid or add a + * custom mode that wasn't probed from EDID or similar to begin with. + * Even though this is an advanced feature and rarely used nowadays, + * some users rely on being able to specify modes manually so drivers + * must be prepared to deal with it. Specifically this means that all + * drivers need not only validate modes in &drm_connector.mode_valid but + * also in this or in the &drm_encoder_helper_funcs.mode_fixup callback + * to make sure invalid modes passed in from userspace are rejected. * * RETURNS: * @@ -205,7 +206,7 @@ struct drm_crtc_helper_funcs { * optimized fast-path instead of a full mode set operation with all the * resulting flickering. If it is not present * drm_crtc_helper_set_config() will fall back to a full modeset, using - * the ->mode_set() callback. Since it can't update other planes it's + * the @mode_set callback. Since it can't update other planes it's * incompatible with atomic modeset support. * * This callback is only used by the CRTC helpers and deprecated. @@ -238,8 +239,7 @@ struct drm_crtc_helper_funcs { /** * @load_lut: * - * Load a LUT prepared with the @gamma_set functions from - * &drm_fb_helper_funcs. + * Load a LUT prepared with the &drm_fb_helper_funcs.gamma_set vfunc. * * This callback is optional and is only used by the fbdev emulation * helpers. @@ -257,10 +257,11 @@ struct drm_crtc_helper_funcs { * * This callback should be used to disable the CRTC. With the atomic * drivers it is called after all encoders connected to this CRTC have - * been shut off already using their own ->disable hook. If that - * sequence is too simple drivers can just add their own hooks and call - * it from this CRTC callback here by looping over all encoders - * connected to it using for_each_encoder_on_crtc(). + * been shut off already using their own + * &drm_encoder_helper_funcs.disable hook. If that sequence is too + * simple drivers can just add their own hooks and call it from this + * CRTC callback here by looping over all encoders connected to it using + * for_each_encoder_on_crtc(). * * This hook is used both by legacy CRTC helpers and atomic helpers. * Atomic drivers don't need to implement it if there's no need to @@ -289,10 +290,10 @@ struct drm_crtc_helper_funcs { * * This callback should be used to enable the CRTC. With the atomic * drivers it is called before all encoders connected to this CRTC are - * enabled through the encoder's own ->enable hook. If that sequence is - * too simple drivers can just add their own hooks and call it from this - * CRTC callback here by looping over all encoders connected to it using - * for_each_encoder_on_crtc(). + * enabled through the encoder's own &drm_encoder_helper_funcs.enable + * hook. If that sequence is too simple drivers can just add their own + * hooks and call it from this CRTC callback here by looping over all + * encoders connected to it using for_each_encoder_on_crtc(). * * This hook is used only by atomic helpers, for symmetry with @disable. * Atomic drivers don't need to implement it if there's no need to @@ -316,16 +317,16 @@ struct drm_crtc_helper_funcs { * beforehand. This is calling order used by the default helper * implementation in drm_atomic_helper_check(). * - * When using drm_atomic_helper_check_planes() CRTCs' ->atomic_check() - * hooks are called after the ones for planes, which allows drivers to - * assign shared resources requested by planes in the CRTC callback - * here. For more complicated dependencies the driver can call the provided - * check helpers multiple times until the computed state has a final - * configuration and everything has been checked. + * When using drm_atomic_helper_check_planes() this hook is called + * after the &drm_plane_helper_funcs.atomc_check hook for planes, which + * allows drivers to assign shared resources requested by planes in this + * callback here. For more complicated dependencies the driver can call + * the provided check helpers multiple times until the computed state + * has a final configuration and everything has been checked. * * This function is also allowed to inspect any other object's state and * can add more state objects to the atomic commit if needed. Care must - * be taken though to ensure that state check&compute functions for + * be taken though to ensure that state check and compute functions for * these added states are all called, and derived state in other objects * all updated. Again the recommendation is to just call check helpers * until a maximal configuration is reached. @@ -400,10 +401,11 @@ struct drm_crtc_helper_funcs { * * This callback should be used to disable the CRTC. With the atomic * drivers it is called after all encoders connected to this CRTC have - * been shut off already using their own ->disable hook. If that - * sequence is too simple drivers can just add their own hooks and call - * it from this CRTC callback here by looping over all encoders - * connected to it using for_each_encoder_on_crtc(). + * been shut off already using their own + * &drm_encoder_helper_funcs.disable hook. If that sequence is too + * simple drivers can just add their own hooks and call it from this + * CRTC callback here by looping over all encoders connected to it using + * for_each_encoder_on_crtc(). * * This hook is used only by atomic helpers. Atomic drivers don't * need to implement it if there's no need to disable anything at the @@ -483,16 +485,18 @@ struct drm_encoder_helper_funcs { * Also beware that neither core nor helpers filter modes before * passing them to the driver: While the list of modes that is * advertised to userspace is filtered using the connector's - * ->mode_valid() callback, neither the core nor the helpers do any - * filtering on modes passed in from userspace when setting a mode. It - * is therefore possible for userspace to pass in a mode that was - * previously filtered out using ->mode_valid() or add a custom mode - * that wasn't probed from EDID or similar to begin with. Even though - * this is an advanced feature and rarely used nowadays, some users rely - * on being able to specify modes manually so drivers must be prepared - * to deal with it. Specifically this means that all drivers need not - * only validate modes in ->mode_valid() but also in ->mode_fixup() to - * make sure invalid modes passed in from userspace are rejected. + * &drm_connector_helper_funcs.mode_valid callback, neither the core nor + * the helpers do any filtering on modes passed in from userspace when + * setting a mode. It is therefore possible for userspace to pass in a + * mode that was previously filtered out using + * &drm_connector_helper_funcs.mode_valid or add a custom mode that + * wasn't probed from EDID or similar to begin with. Even though this + * is an advanced feature and rarely used nowadays, some users rely on + * being able to specify modes manually so drivers must be prepared to + * deal with it. Specifically this means that all drivers need not only + * validate modes in &drm_connector.mode_valid but also in this or in + * the &drm_crtc_helper_funcs.mode_fixup callback to make sure + * invalid modes passed in from userspace are rejected. * * RETURNS: * @@ -544,7 +548,7 @@ struct drm_encoder_helper_funcs { * use this hook, because the helper library calls it only once and not * every time the display pipeline is suspend using either DPMS or the * new "ACTIVE" property. Such drivers should instead move all their - * encoder setup into the ->enable() callback. + * encoder setup into the @enable callback. * * This callback is used both by the legacy CRTC helpers and the atomic * modeset helpers. It is optional in the atomic helpers. @@ -570,7 +574,7 @@ struct drm_encoder_helper_funcs { * use this hook, because the helper library calls it only once and not * every time the display pipeline is suspended using either DPMS or the * new "ACTIVE" property. Such drivers should instead move all their - * encoder setup into the ->enable() callback. + * encoder setup into the @enable callback. * * This callback is used by the atomic modeset helpers in place of the * @mode_set callback, if set by the driver. It is optional and should @@ -621,10 +625,10 @@ struct drm_encoder_helper_funcs { * * This callback should be used to disable the encoder. With the atomic * drivers it is called before this encoder's CRTC has been shut off - * using the CRTC's own ->disable hook. If that sequence is too simple - * drivers can just add their own driver private encoder hooks and call - * them from CRTC's callback by looping over all encoders connected to - * it using for_each_encoder_on_crtc(). + * using their own &drm_crtc_helper_funcs.disable hook. If that + * sequence is too simple drivers can just add their own driver private + * encoder hooks and call them from CRTC's callback by looping over all + * encoders connected to it using for_each_encoder_on_crtc(). * * This hook is used both by legacy CRTC helpers and atomic helpers. * Atomic drivers don't need to implement it if there's no need to @@ -651,10 +655,10 @@ struct drm_encoder_helper_funcs { * * This callback should be used to enable the encoder. With the atomic * drivers it is called after this encoder's CRTC has been enabled using - * the CRTC's own ->enable hook. If that sequence is too simple drivers - * can just add their own driver private encoder hooks and call them - * from CRTC's callback by looping over all encoders connected to it - * using for_each_encoder_on_crtc(). + * their own &drm_crtc_helper_funcs.enable hook. If that sequence is + * too simple drivers can just add their own driver private encoder + * hooks and call them from CRTC's callback by looping over all encoders + * connected to it using for_each_encoder_on_crtc(). * * This hook is used only by atomic helpers, for symmetry with @disable. * Atomic drivers don't need to implement it if there's no need to @@ -716,7 +720,7 @@ struct drm_connector_helper_funcs { * @get_modes: * * This function should fill in all modes currently valid for the sink - * into the connector->probed_modes list. It should also update the + * into the &drm_connector.probed_modes list. It should also update the * EDID property by calling drm_mode_connector_update_edid_property(). * * The usual way to implement this is to cache the EDID retrieved in the @@ -725,8 +729,9 @@ struct drm_connector_helper_funcs { * them by calling drm_add_edid_modes(). But connectors that driver a * fixed panel can also manually add specific modes using * drm_mode_probed_add(). Drivers which manually add modes should also - * make sure that the @display_info, @width_mm and @height_mm fields of the - * &struct drm_connector are filled in. + * make sure that the &drm_connector.display_info, + * &drm_connector.width_mm and &drm_connector.height_mm fields are + * filled in. * * Virtual drivers that just want some standard VESA mode with a given * resolution can call drm_add_modes_noedid(), and mark the preferred @@ -735,7 +740,7 @@ struct drm_connector_helper_funcs { * Finally drivers that support audio probably want to update the ELD * data, too, using drm_edid_to_eld(). * - * This function is only called after the ->detect() hook has indicated + * This function is only called after the @detect hook has indicated * that a sink is connected and when the EDID isn't overridden through * sysfs or the kernel commandline. * @@ -768,8 +773,8 @@ struct drm_connector_helper_funcs { * * RETURNS: * - * Either MODE_OK or one of the failure reasons in enum - * &drm_mode_status. + * Either &drm_mode_status.MODE_OK or one of the failure reasons in &enum + * drm_mode_status. */ enum drm_mode_status (*mode_valid)(struct drm_connector *connector, struct drm_display_mode *mode); @@ -875,7 +880,7 @@ struct drm_plane_helper_funcs { * RETURNS: * * 0 on success or one of the following negative error codes allowed by - * the atomic_commit hook in &drm_mode_config_funcs. When using helpers + * the &drm_mode_config_funcs.atomic_commit vfunc. When using helpers * this callback is the only one which can fail an atomic commit, * everything else must complete successfully. */ @@ -898,7 +903,7 @@ struct drm_plane_helper_funcs { * * Drivers should check plane specific constraints in this hook. * - * When using drm_atomic_helper_check_planes() plane's ->atomic_check() + * When using drm_atomic_helper_check_planes() plane's @atomic_check * hooks are called before the ones for CRTCs, which allows drivers to * request shared resources that the CRTC controls here. For more * complicated dependencies the driver can call the provided check helpers @@ -907,7 +912,7 @@ struct drm_plane_helper_funcs { * * This function is also allowed to inspect any other object's state and * can add more state objects to the atomic commit if needed. Care must - * be taken though to ensure that state check&compute functions for + * be taken though to ensure that state check and compute functions for * these added states are all called, and derived state in other objects * all updated. Again the recommendation is to just call check helpers * until a maximal configuration is reached. @@ -936,8 +941,8 @@ struct drm_plane_helper_funcs { * @atomic_update: * * Drivers should use this function to update the plane state. This - * hook is called in-between the ->atomic_begin() and - * ->atomic_flush() of &drm_crtc_helper_funcs. + * hook is called in-between the &drm_crtc_helper_funcs.atomic_begin and + * drm_crtc_helper_funcs.atomic_flush callbacks. * * Note that the power state of the display pipe when this function is * called depends upon the exact helpers and calling sequence the driver @@ -953,14 +958,15 @@ struct drm_plane_helper_funcs { * @atomic_disable: * * Drivers should use this function to unconditionally disable a plane. - * This hook is called in-between the ->atomic_begin() and - * ->atomic_flush() of &drm_crtc_helper_funcs. It is an alternative to + * This hook is called in-between the + * &drm_crtc_helper_funcs.atomic_begin and + * drm_crtc_helper_funcs.atomic_flush callbacks. It is an alternative to * @atomic_update, which will be called for disabling planes, too, if * the @atomic_disable hook isn't implemented. * * This hook is also useful to disable planes in preparation of a modeset, * by calling drm_atomic_helper_disable_planes_on_crtc() from the - * ->disable() hook in &drm_crtc_helper_funcs. + * &drm_crtc_helper_funcs.disable hook. * * Note that the power state of the display pipe when this function is * called depends upon the exact helpers and calling sequence the driver diff --git a/include/drm/drm_simple_kms_helper.h b/include/drm/drm_simple_kms_helper.h index d138d08a48c1..fffbb95a0915 100644 --- a/include/drm/drm_simple_kms_helper.h +++ b/include/drm/drm_simple_kms_helper.h @@ -77,9 +77,9 @@ struct drm_simple_display_pipe_funcs { /** * @prepare_fb: * - * Optional, called by &struct drm_plane_helper_funcs ->prepare_fb . - * Please read the documentation for the ->prepare_fb hook in - * &struct drm_plane_helper_funcs for more details. + * Optional, called by &drm_plane_helper_funcs.prepare_fb. Please read + * the documentation for the &drm_plane_helper_funcs.prepare_fb hook for + * more details. */ int (*prepare_fb)(struct drm_simple_display_pipe *pipe, struct drm_plane_state *plane_state); @@ -87,9 +87,9 @@ struct drm_simple_display_pipe_funcs { /** * @cleanup_fb: * - * Optional, called by &struct drm_plane_helper_funcs ->cleanup_fb . - * Please read the documentation for the ->cleanup_fb hook in - * &struct drm_plane_helper_funcs for more details. + * Optional, called by &drm_plane_helper_funcs.cleanup_fb. Please read + * the documentation for the &drm_plane_helper_funcs.cleanup_fb hook for + * more details. */ void (*cleanup_fb)(struct drm_simple_display_pipe *pipe, struct drm_plane_state *plane_state);