From: Roel Kluin Date: Tue, 30 Dec 2008 02:42:33 +0000 (-0800) Subject: EtherExpress16: fix printing timed out status X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=684f4a4c4a69f7226d8c7559c0cdfc7bd388335a;p=linux-beck.git EtherExpress16: fix printing timed out status in drivers/net/eexpress.c:558, function unstick_cu() while (!SCB_complete(rsst=scb_status(dev))) { ... if (...) printk(KERN_WARNING "%s: Reset timed out status %04x, retrying...\n", dev->name,rsst); } but this will become while (!((rsst = scb_status(dev) & 0x8000) != 0) ... because of the macro: #define SCB_complete(s) ((s&0x8000)!=0) so rsst can only become either 0x8000 or 0, but in the latter case the loop ends, I think the wrong timed out status is printed. This also cleans up similar macros. Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- diff --git a/drivers/net/eexpress.h b/drivers/net/eexpress.h index 707df3fcfe40..dc9c6ea289e9 100644 --- a/drivers/net/eexpress.h +++ b/drivers/net/eexpress.h @@ -68,17 +68,17 @@ */ /* these functions take the SCB status word and test the relevant status bit */ -#define SCB_complete(s) ((s&0x8000)!=0) -#define SCB_rxdframe(s) ((s&0x4000)!=0) -#define SCB_CUdead(s) ((s&0x2000)!=0) -#define SCB_RUdead(s) ((s&0x1000)!=0) -#define SCB_ack(s) (s & 0xf000) +#define SCB_complete(s) (((s) & 0x8000) != 0) +#define SCB_rxdframe(s) (((s) & 0x4000) != 0) +#define SCB_CUdead(s) (((s) & 0x2000) != 0) +#define SCB_RUdead(s) (((s) & 0x1000) != 0) +#define SCB_ack(s) ((s) & 0xf000) /* Command unit status: 0=idle, 1=suspended, 2=active */ -#define SCB_CUstat(s) ((s&0x0300)>>8) +#define SCB_CUstat(s) (((s)&0x0300)>>8) /* Receive unit status: 0=idle, 1=suspended, 2=out of resources, 4=ready */ -#define SCB_RUstat(s) ((s&0x0070)>>4) +#define SCB_RUstat(s) (((s)&0x0070)>>4) /* SCB commands */ #define SCB_CUnop 0x0000 @@ -98,18 +98,18 @@ * Command block defines */ -#define Stat_Done(s) ((s&0x8000)!=0) -#define Stat_Busy(s) ((s&0x4000)!=0) -#define Stat_OK(s) ((s&0x2000)!=0) -#define Stat_Abort(s) ((s&0x1000)!=0) -#define Stat_STFail ((s&0x0800)!=0) -#define Stat_TNoCar(s) ((s&0x0400)!=0) -#define Stat_TNoCTS(s) ((s&0x0200)!=0) -#define Stat_TNoDMA(s) ((s&0x0100)!=0) -#define Stat_TDefer(s) ((s&0x0080)!=0) -#define Stat_TColl(s) ((s&0x0040)!=0) -#define Stat_TXColl(s) ((s&0x0020)!=0) -#define Stat_NoColl(s) (s&0x000f) +#define Stat_Done(s) (((s) & 0x8000) != 0) +#define Stat_Busy(s) (((s) & 0x4000) != 0) +#define Stat_OK(s) (((s) & 0x2000) != 0) +#define Stat_Abort(s) (((s) & 0x1000) != 0) +#define Stat_STFail (((s) & 0x0800) != 0) +#define Stat_TNoCar(s) (((s) & 0x0400) != 0) +#define Stat_TNoCTS(s) (((s) & 0x0200) != 0) +#define Stat_TNoDMA(s) (((s) & 0x0100) != 0) +#define Stat_TDefer(s) (((s) & 0x0080) != 0) +#define Stat_TColl(s) (((s) & 0x0040) != 0) +#define Stat_TXColl(s) (((s) & 0x0020) != 0) +#define Stat_NoColl(s) ((s) & 0x000f) /* Cmd_END will end AFTER the command if this is the first * command block after an SCB_CUstart, but BEFORE the command @@ -136,16 +136,16 @@ * Frame Descriptor (Receive block) defines */ -#define FD_Done(s) ((s&0x8000)!=0) -#define FD_Busy(s) ((s&0x4000)!=0) -#define FD_OK(s) ((s&0x2000)!=0) +#define FD_Done(s) (((s) & 0x8000) != 0) +#define FD_Busy(s) (((s) & 0x4000) != 0) +#define FD_OK(s) (((s) & 0x2000) != 0) -#define FD_CRC(s) ((s&0x0800)!=0) -#define FD_Align(s) ((s&0x0400)!=0) -#define FD_Resrc(s) ((s&0x0200)!=0) -#define FD_DMA(s) ((s&0x0100)!=0) -#define FD_Short(s) ((s&0x0080)!=0) -#define FD_NoEOF(s) ((s&0x0040)!=0) +#define FD_CRC(s) (((s) & 0x0800) != 0) +#define FD_Align(s) (((s) & 0x0400) != 0) +#define FD_Resrc(s) (((s) & 0x0200) != 0) +#define FD_DMA(s) (((s) & 0x0100) != 0) +#define FD_Short(s) (((s) & 0x0080) != 0) +#define FD_NoEOF(s) (((s) & 0x0040) != 0) struct rfd_header { volatile unsigned long flags;