From: Andreas Matthies Date: Mon, 30 Sep 2013 16:08:16 +0000 (-0300) Subject: [media] tda10071: change firmware download condition X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=6894c070e1f23492239a2e5d6777cb1451620bda;p=linux-beck.git [media] tda10071: change firmware download condition Reading firmware status register to detect whether firmware is running or not didn't work 100% reliably. That register was likely set by firmware itself which means it could not contain reasonable values until firmware is up and running. Usually it just worked as some garbage value was returned accidentally but it appears that in some cases returned garbage value was 0x00 which was considered "firmware is up and running" by the driver and firmware loading was skipped leaving device to non-working state. Fix problem by removing unreliable check and let the driver keep count whether firmware is loaded or not. Signed-off-by: Andreas Matthies Signed-off-by: Antti Palosaari Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/dvb-frontends/tda10071.c b/drivers/media/dvb-frontends/tda10071.c index 2521f7e23018..e79749cfec81 100644 --- a/drivers/media/dvb-frontends/tda10071.c +++ b/drivers/media/dvb-frontends/tda10071.c @@ -912,14 +912,8 @@ static int tda10071_init(struct dvb_frontend *fe) { 0xd5, 0x03, 0x03 }, }; - /* firmware status */ - ret = tda10071_rd_reg(priv, 0x51, &tmp); - if (ret) - goto error; - - if (!tmp) { + if (priv->warm) { /* warm state - wake up device from sleep */ - priv->warm = 1; for (i = 0; i < ARRAY_SIZE(tab); i++) { ret = tda10071_wr_reg_mask(priv, tab[i].reg, @@ -937,7 +931,6 @@ static int tda10071_init(struct dvb_frontend *fe) goto error; } else { /* cold state - try to download firmware */ - priv->warm = 0; /* request the firmware, this will block and timeout */ ret = request_firmware(&fw, fw_file, priv->i2c->dev.parent);