From: Andy Shevchenko Date: Wed, 17 Aug 2016 16:20:26 +0000 (+0300) Subject: serial: 8250: enable AFE on ports where FIFO is 16 bytes X-Git-Tag: v4.9-rc1~147^2~85 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=68af490b03b40cc31b2cd47899661d87ab9f127d;p=karo-tx-linux.git serial: 8250: enable AFE on ports where FIFO is 16 bytes Intel Quark has 16550A compatible UART with autoflow feature enabled. It has only 16 bytes of FIFO. Currently serial8250_do_set_termios() prevents to enable autoflow since the minimum requirement of 32 bytes of FIFO size. Drop a FIFO size limitation to allow autoflow control be enabled on such UARTs. While here, comment out UART_CAP_AFE for PORT_AR7 since it wasn't working and it will be not a good idea to use it in conjunction with trigger level of 1 byte. Suggested-by: Peter Hurley Reviewed-by: Peter Hurley Signed-off-by: Andy Shevchenko Tested-by: Bryan O'Donoghue Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index c45c1e3f3631..1bd7ea0aff03 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -178,7 +178,7 @@ static const struct serial8250_config uart_config[] = { .fifo_size = 16, .tx_loadsz = 16, .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, - .flags = UART_CAP_FIFO | UART_CAP_AFE, + .flags = UART_CAP_FIFO /* | UART_CAP_AFE */, }, [PORT_U6_16550A] = { .name = "U6_16550A", @@ -2549,12 +2549,9 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, /* * MCR-based auto flow control. When AFE is enabled, RTS will be * deasserted when the receive FIFO contains more characters than - * the trigger, or the MCR RTS bit is cleared. In the case where - * the remote UART is not using CTS auto flow control, we must - * have sufficient FIFO entries for the latency of the remote - * UART to respond. IOW, at least 32 bytes of FIFO. + * the trigger, or the MCR RTS bit is cleared. */ - if (up->capabilities & UART_CAP_AFE && port->fifosize >= 32) { + if (up->capabilities & UART_CAP_AFE) { up->mcr &= ~UART_MCR_AFE; if (termios->c_cflag & CRTSCTS) up->mcr |= UART_MCR_AFE;