From: Kevin Hao Date: Thu, 13 Aug 2015 11:51:36 +0000 (+0800) Subject: powerpc/e6500: hw tablewalk: optimize a bit for tcd lock acquiring codes X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=69399ee9cbcb00bbdd9ff6fafafde23ef404d40f;p=linux-beck.git powerpc/e6500: hw tablewalk: optimize a bit for tcd lock acquiring codes It makes no sense to put the instructions for calculating the lock value (cpu number + 1) and the clearing of eq bit of cr1 in lbarx/stbcx loop. And when the lock is acquired by the other thread, the current lock value has no chance to equal with the lock value used by current cpu. So we can skip the comparing for these two lock values in the lbz/bne loop. Signed-off-by: Kevin Hao Signed-off-by: Scott Wood --- diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S index 765b419883f2..e4185581c5a7 100644 --- a/arch/powerpc/mm/tlb_low_64e.S +++ b/arch/powerpc/mm/tlb_low_64e.S @@ -308,11 +308,11 @@ BEGIN_FTR_SECTION /* CPU_FTR_SMT */ * * MAS6:IND should be already set based on MAS4 */ -1: lbarx r15,0,r11 lhz r10,PACAPACAINDEX(r13) - cmpdi r15,0 - cmpdi cr1,r15,1 /* set cr1.eq = 0 for non-recursive */ addi r10,r10,1 + crclr cr1*4+eq /* set cr1.eq = 0 for non-recursive */ +1: lbarx r15,0,r11 + cmpdi r15,0 bne 2f stbcx. r10,0,r11 bne 1b @@ -320,9 +320,9 @@ BEGIN_FTR_SECTION /* CPU_FTR_SMT */ .subsection 1 2: cmpd cr1,r15,r10 /* recursive lock due to mcheck/crit/etc? */ beq cr1,3b /* unlock will happen if cr1.eq = 0 */ - lbz r15,0(r11) +10: lbz r15,0(r11) cmpdi r15,0 - bne 2b + bne 10b b 1b .previous