From: Alexander Shiyan Date: Wed, 16 Apr 2014 07:24:55 +0000 (+0400) Subject: ARM: dts: imx51-babbage: Sort nodes by name X-Git-Tag: next-20140502~94^2^2~22 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=69452b489ad3b0c16cb7351efacff449abe793d4;p=karo-tx-linux.git ARM: dts: imx51-babbage: Sort nodes by name This patch sorts nodes by name and moves "iomux" configuration at the bottom of file. Signed-off-by: Alexander Shiyan Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index ed9d769b1a23..6484b739ae37 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -21,6 +21,20 @@ reg = <0x90000000 0x20000000>; }; + clocks { + ckih1 { + clock-frequency = <22579200>; + }; + + clk_26M: codec_clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <26000000>; + gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + }; + }; + display0: display@di0 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "rgb24"; @@ -104,34 +118,6 @@ }; }; - sound { - compatible = "fsl,imx51-babbage-sgtl5000", - "fsl,imx-audio-sgtl5000"; - model = "imx51-babbage-sgtl5000"; - ssi-controller = <&ssi2>; - audio-codec = <&sgtl5000>; - audio-routing = - "MIC_IN", "Mic Jack", - "Mic Jack", "Mic Bias", - "Headphone Jack", "HP_OUT"; - mux-int-port = <2>; - mux-ext-port = <3>; - }; - - clocks { - ckih1 { - clock-frequency = <22579200>; - }; - - clk_26M: codec_clock { - compatible = "fixed-clock"; - reg=<0>; - #clock-cells = <0>; - clock-frequency = <26000000>; - gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -162,6 +148,20 @@ }; }; + sound { + compatible = "fsl,imx51-babbage-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx51-babbage-sgtl5000"; + ssi-controller = <&ssi2>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <2>; + mux-ext-port = <3>; + }; + usbphy { #address-cells = <1>; #size-cells = <0>; @@ -176,26 +176,9 @@ }; }; -&esdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc1>; - fsl,cd-controller; - fsl,wp-controller; - status = "okay"; -}; - -&esdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc2>; - cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; - wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&uart3 { +&audmux { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + pinctrl-0 = <&pinctrl_audmux>; status = "okay"; }; @@ -327,6 +310,47 @@ }; }; +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + fsl,cd-controller; + fsl,wp-controller; + status = "okay"; +}; + +&esdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2>; + cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "mii"; + phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + phy-reset-duration = <1>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_clkcodec>; + reg = <0x0a>; + clocks = <&clk_26M>; + VDDA-supply = <&vdig_reg>; + VDDIO-supply = <&vvideo_reg>; + }; +}; + &ipu_di0_disp0 { remote-endpoint = <&display0_in>; }; @@ -335,11 +359,72 @@ remote-endpoint = <&display1_in>; }; +&kpp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kpp>; + linux,keymap = < + MATRIX_KEY(0, 0, KEY_UP) + MATRIX_KEY(0, 1, KEY_DOWN) + MATRIX_KEY(0, 2, KEY_VOLUMEDOWN) + MATRIX_KEY(0, 3, KEY_HOME) + MATRIX_KEY(1, 0, KEY_RIGHT) + MATRIX_KEY(1, 1, KEY_LEFT) + MATRIX_KEY(1, 2, KEY_ENTER) + MATRIX_KEY(1, 3, KEY_VOLUMEUP) + MATRIX_KEY(2, 0, KEY_F6) + MATRIX_KEY(2, 1, KEY_F8) + MATRIX_KEY(2, 2, KEY_F9) + MATRIX_KEY(2, 3, KEY_F10) + MATRIX_KEY(3, 0, KEY_F1) + MATRIX_KEY(3, 1, KEY_F2) + MATRIX_KEY(3, 2, KEY_F3) + MATRIX_KEY(3, 3, KEY_POWER) + >; + status = "okay"; +}; + &ssi2 { fsl,mode = "i2s-slave"; status = "okay"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + vbus-supply = <®_usbh1_vbus>; + fsl,usbphy = <&usbh1phy>; + phy_type = "ulpi"; + status = "okay"; +}; + +&usbotg { + dr_mode = "otg"; + disable-over-current; + phy_type = "utmi_wide"; + vbus-supply = <®_usbotg_vbus>; + status = "okay"; +}; + &iomuxc { imx51-babbage { pinctrl_audmux: audmuxgrp { @@ -412,7 +497,7 @@ MX51_PAD_NANDF_CS6__FEC_TDATA3 0x80000000 MX51_PAD_NANDF_CS7__FEC_TX_EN 0x80000000 MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x80000000 - MX51_PAD_EIM_A20__GPIO2_14 0x85 /* Reset */ + MX51_PAD_EIM_A20__GPIO2_14 0x85 /* Reset */ >; }; @@ -564,88 +649,3 @@ }; }; }; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - fsl,uart-has-rtscts; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; - - sgtl5000: codec@0a { - compatible = "fsl,sgtl5000"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_clkcodec>; - reg = <0x0a>; - clocks = <&clk_26M>; - VDDA-supply = <&vdig_reg>; - VDDIO-supply = <&vvideo_reg>; - }; -}; - -&audmux { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux>; - status = "okay"; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec>; - phy-mode = "mii"; - phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; - phy-reset-duration = <1>; - status = "okay"; -}; - -&kpp { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_kpp>; - linux,keymap = < - MATRIX_KEY(0, 0, KEY_UP) - MATRIX_KEY(0, 1, KEY_DOWN) - MATRIX_KEY(0, 2, KEY_VOLUMEDOWN) - MATRIX_KEY(0, 3, KEY_HOME) - MATRIX_KEY(1, 0, KEY_RIGHT) - MATRIX_KEY(1, 1, KEY_LEFT) - MATRIX_KEY(1, 2, KEY_ENTER) - MATRIX_KEY(1, 3, KEY_VOLUMEUP) - MATRIX_KEY(2, 0, KEY_F6) - MATRIX_KEY(2, 1, KEY_F8) - MATRIX_KEY(2, 2, KEY_F9) - MATRIX_KEY(2, 3, KEY_F10) - MATRIX_KEY(3, 0, KEY_F1) - MATRIX_KEY(3, 1, KEY_F2) - MATRIX_KEY(3, 2, KEY_F3) - MATRIX_KEY(3, 3, KEY_POWER) - >; - status = "okay"; -}; - -&usbh1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1>; - vbus-supply = <®_usbh1_vbus>; - fsl,usbphy = <&usbh1phy>; - phy_type = "ulpi"; - status = "okay"; -}; - -&usbotg { - dr_mode = "otg"; - disable-over-current; - phy_type = "utmi_wide"; - vbus-supply = <®_usbotg_vbus>; - status = "okay"; -};