From: H Hartley Sweeten Date: Mon, 20 Oct 2014 18:34:17 +0000 (-0700) Subject: staging: comedi: addi_apci_3120: remove private data 'iobase' X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=695f34cef33421ac89dd77e5e047e131bb3f36c0;p=linux-beck.git staging: comedi: addi_apci_3120: remove private data 'iobase' This member of the private data holds the start address of PCI BAR 1 that is used to access the board registers. The start address is also stored in the comedi_device 'iobase' member. Use that instead and remove the private data member. Remove some unnecessary casts when reading the board registers. Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c index d6875d96d5c9..0ba4b79cf515 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c @@ -347,8 +347,7 @@ static int apci3120_ai_insn_read(struct comedi_device *dev, * Testing if board have the new Quartz and calculate the time value * to set in the timer */ - us_TmpValue = - (unsigned short) inw(devpriv->iobase + APCI3120_RD_STATUS); + us_TmpValue = inw(dev->iobase + APCI3120_RD_STATUS); /* EL250804: Testing if board APCI3120 have the new Quartz or if it is an APCI3001 */ if ((us_TmpValue & 0x00B0) == 0x00B0 @@ -368,7 +367,7 @@ static int apci3120_ai_insn_read(struct comedi_device *dev, /* * Testing the interrupt flag and set the EOC bit Clears the FIFO */ - inw(devpriv->iobase + APCI3120_RESET_FIFO); + inw(dev->iobase + APCI3120_RESET_FIFO); /* Initialize the sequence array */ if (!apci3120_setup_chan_list(dev, s, 1, @@ -381,7 +380,7 @@ static int apci3120_ai_insn_read(struct comedi_device *dev, b_TimerSelectMode & 0xFC) | APCI3120_TIMER_0_MODE_4; outb(devpriv->b_TimerSelectMode, - devpriv->iobase + APCI3120_TIMER_CRT1); + dev->iobase + APCI3120_TIMER_CRT1); /* Reset the scan bit and Disables the EOS, DMA, EOC interrupt */ devpriv->b_ModeSelectRegister = @@ -396,7 +395,7 @@ static int apci3120_ai_insn_read(struct comedi_device *dev, b_ModeSelectRegister & APCI3120_DISABLE_EOS_INT) | APCI3120_ENABLE_EOC_INT; - inw(devpriv->iobase); + inw(dev->iobase + 0); } else { devpriv->b_ModeSelectRegister = @@ -406,7 +405,7 @@ static int apci3120_ai_insn_read(struct comedi_device *dev, } outb(devpriv->b_ModeSelectRegister, - devpriv->iobase + APCI3120_WRITE_MODE_SELECT); + dev->iobase + APCI3120_WRITE_MODE_SELECT); /* Sets gate 0 */ devpriv->us_OutputRegister = @@ -414,17 +413,17 @@ static int apci3120_ai_insn_read(struct comedi_device *dev, us_OutputRegister & APCI3120_CLEAR_PA_PR) | APCI3120_ENABLE_TIMER0; outw(devpriv->us_OutputRegister, - devpriv->iobase + APCI3120_WR_ADDRESS); + dev->iobase + APCI3120_WR_ADDRESS); /* Select Timer 0 */ b_Tmp = ((devpriv-> b_DigitalOutputRegister) & 0xF0) | APCI3120_SELECT_TIMER_0_WORD; - outb(b_Tmp, devpriv->iobase + APCI3120_TIMER_CRT0); + outb(b_Tmp, dev->iobase + APCI3120_TIMER_CRT0); /* Set the conversion time */ outw(us_ConvertTiming, - devpriv->iobase + APCI3120_TIMER_VALUE); + dev->iobase + APCI3120_TIMER_VALUE); us_TmpValue = (unsigned short) inw(dev->iobase + APCI3120_RD_STATUS); @@ -433,26 +432,25 @@ static int apci3120_ai_insn_read(struct comedi_device *dev, do { /* Waiting for the end of conversion */ - us_TmpValue = - inw(devpriv->iobase + - APCI3120_RD_STATUS); + us_TmpValue = inw(dev->iobase + + APCI3120_RD_STATUS); } while ((us_TmpValue & APCI3120_EOC) == APCI3120_EOC); /* Read the result in FIFO and put it in insn data pointer */ - us_TmpValue = inw(devpriv->iobase + 0); + us_TmpValue = inw(dev->iobase + 0); *data = us_TmpValue; - inw(devpriv->iobase + APCI3120_RESET_FIFO); + inw(dev->iobase + APCI3120_RESET_FIFO); } break; case APCI3120_EOS_MODE: - inw(devpriv->iobase); + inw(dev->iobase + 0); /* Clears the FIFO */ - inw(devpriv->iobase + APCI3120_RESET_FIFO); + inw(dev->iobase + APCI3120_RESET_FIFO); /* clear PA PR and disable timer 0 */ devpriv->us_OutputRegister = @@ -461,7 +459,7 @@ static int apci3120_ai_insn_read(struct comedi_device *dev, APCI3120_DISABLE_TIMER0; outw(devpriv->us_OutputRegister, - devpriv->iobase + APCI3120_WR_ADDRESS); + dev->iobase + APCI3120_WR_ADDRESS); if (!apci3120_setup_chan_list(dev, s, devpriv->ui_AiNbrofChannels, @@ -474,24 +472,24 @@ static int apci3120_ai_insn_read(struct comedi_device *dev, b_TimerSelectMode & 0xFC) | APCI3120_TIMER_0_MODE_2; outb(devpriv->b_TimerSelectMode, - devpriv->iobase + APCI3120_TIMER_CRT1); + dev->iobase + APCI3120_TIMER_CRT1); /* Select Timer 0 */ b_Tmp = ((devpriv-> b_DigitalOutputRegister) & 0xF0) | APCI3120_SELECT_TIMER_0_WORD; - outb(b_Tmp, devpriv->iobase + APCI3120_TIMER_CRT0); + outb(b_Tmp, dev->iobase + APCI3120_TIMER_CRT0); /* Set the conversion time */ outw(us_ConvertTiming, - devpriv->iobase + APCI3120_TIMER_VALUE); + dev->iobase + APCI3120_TIMER_VALUE); /* Set the scan bit */ devpriv->b_ModeSelectRegister = devpriv-> b_ModeSelectRegister | APCI3120_ENABLE_SCAN; outb(devpriv->b_ModeSelectRegister, - devpriv->iobase + APCI3120_WRITE_MODE_SELECT); + dev->iobase + APCI3120_WRITE_MODE_SELECT); /* If Interrupt function is loaded */ if (devpriv->b_EocEosInterrupt == APCI3120_ENABLE) { @@ -501,7 +499,7 @@ static int apci3120_ai_insn_read(struct comedi_device *dev, b_ModeSelectRegister & APCI3120_DISABLE_EOC_INT) | APCI3120_ENABLE_EOS_INT; - inw(devpriv->iobase); + inw(dev->iobase + 0); } else devpriv->b_ModeSelectRegister = @@ -510,34 +508,33 @@ static int apci3120_ai_insn_read(struct comedi_device *dev, APCI3120_DISABLE_ALL_INTERRUPT_WITHOUT_TIMER; outb(devpriv->b_ModeSelectRegister, - devpriv->iobase + APCI3120_WRITE_MODE_SELECT); + dev->iobase + APCI3120_WRITE_MODE_SELECT); - inw(devpriv->iobase + APCI3120_RD_STATUS); + inw(dev->iobase + APCI3120_RD_STATUS); /* Sets gate 0 */ devpriv->us_OutputRegister = devpriv-> us_OutputRegister | APCI3120_ENABLE_TIMER0; outw(devpriv->us_OutputRegister, - devpriv->iobase + APCI3120_WR_ADDRESS); + dev->iobase + APCI3120_WR_ADDRESS); /* Start conversion */ - outw(0, devpriv->iobase + APCI3120_START_CONVERSION); + outw(0, dev->iobase + APCI3120_START_CONVERSION); /* Waiting of end of conversion if interrupt is not installed */ if (devpriv->b_EocEosInterrupt == APCI3120_DISABLE) { /* Waiting the end of conversion */ do { - us_TmpValue = - inw(devpriv->iobase + - APCI3120_RD_STATUS); + us_TmpValue = inw(dev->iobase + + APCI3120_RD_STATUS); } while ((us_TmpValue & APCI3120_EOS) != APCI3120_EOS); for (i = 0; i < devpriv->ui_AiNbrofChannels; i++) { /* Read the result in FIFO and write them in shared memory */ - us_TmpValue = inw(devpriv->iobase); + us_TmpValue = inw(dev->iobase); data[i] = (unsigned int) us_TmpValue; } @@ -787,7 +784,7 @@ static int apci3120_cyclic_ai(int mode, /* Resets the FIFO */ /* BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver */ - inb(devpriv->iobase + APCI3120_RESET_FIFO); + inb(dev->iobase + APCI3120_RESET_FIFO); /* END JK 07.05.04: Comparison between WIN32 and Linux driver */ devpriv->ui_AiActualScan = 0; @@ -1392,7 +1389,7 @@ static irqreturn_t apci3120_interrupt(int irq, void *d) devpriv->b_ExttrigEnable = APCI3120_DISABLE; } /* clear the timer 2 interrupt */ - inb(devpriv->iobase + APCI3120_TIMER_STATUS_REGISTER); + inb(dev->iobase + APCI3120_TIMER_STATUS_REGISTER); if (int_amcc & MASTER_ABORT_INT) dev_err(dev->class_dev, "AMCC IRQ - MASTER DMA ABORT!\n"); @@ -1405,8 +1402,7 @@ static irqreturn_t apci3120_interrupt(int irq, void *d) if (devpriv->b_EocEosInterrupt == APCI3120_ENABLE) { /* Read the AI Value */ - devpriv->ui_AiReadData[0] = - (unsigned int) inw(devpriv->iobase + 0); + devpriv->ui_AiReadData[0] = inw(dev->iobase + 0); devpriv->b_EocEosInterrupt = APCI3120_DISABLE; send_sig(SIGIO, devpriv->tsk_Current, 0); /* send signal to the sample */ } else { @@ -1415,8 +1411,7 @@ static irqreturn_t apci3120_interrupt(int irq, void *d) devpriv-> b_ModeSelectRegister & APCI3120_DISABLE_EOC_INT; outb(devpriv->b_ModeSelectRegister, - devpriv->iobase + APCI3120_WRITE_MODE_SELECT); - + dev->iobase + APCI3120_WRITE_MODE_SELECT); } } @@ -1440,7 +1435,7 @@ static irqreturn_t apci3120_interrupt(int irq, void *d) ui_Check = 0; for (i = 0; i < devpriv->ui_AiNbrofChannels; i++) { - us_TmpValue = inw(devpriv->iobase + 0); + us_TmpValue = inw(dev->iobase + 0); devpriv->ui_AiReadData[i] = (unsigned int) us_TmpValue; } @@ -1562,7 +1557,7 @@ static int apci3120_config_insn_timer(struct comedi_device *dev, ui_Timervalue2 = data[1] / 1000; /* convert nano seconds to u seconds */ - us_TmpValue = (unsigned short) inw(devpriv->iobase + APCI3120_RD_STATUS); + us_TmpValue = inw(dev->iobase + APCI3120_RD_STATUS); /* * EL250804: Testing if board APCI3120 have the new Quartz or if it @@ -1580,7 +1575,7 @@ static int apci3120_config_insn_timer(struct comedi_device *dev, /* Reset gate 2 of Timer 2 to disable it (Set Bit D14 to 0) */ devpriv->us_OutputRegister = devpriv->us_OutputRegister & APCI3120_DISABLE_TIMER2; - outw(devpriv->us_OutputRegister, devpriv->iobase + APCI3120_WR_ADDRESS); + outw(devpriv->us_OutputRegister, dev->iobase + APCI3120_WR_ADDRESS); /* Disable TIMER Interrupt */ devpriv->b_ModeSelectRegister = @@ -1593,14 +1588,14 @@ static int apci3120_config_insn_timer(struct comedi_device *dev, b_ModeSelectRegister & APCI3120_DISABLE_EOC_INT & APCI3120_DISABLE_EOS_INT; outb(devpriv->b_ModeSelectRegister, - devpriv->iobase + APCI3120_WRITE_MODE_SELECT); + dev->iobase + APCI3120_WRITE_MODE_SELECT); if (data[0] == APCI3120_TIMER) { /* initialize timer */ /* Set the Timer 2 in mode 2(Timer) */ devpriv->b_TimerSelectMode = (devpriv-> b_TimerSelectMode & 0x0F) | APCI3120_TIMER_2_MODE_2; outb(devpriv->b_TimerSelectMode, - devpriv->iobase + APCI3120_TIMER_CRT1); + dev->iobase + APCI3120_TIMER_CRT1); /* * Configure the timer 2 for writing the LOW unsigned short of timer @@ -1614,17 +1609,17 @@ static int apci3120_config_insn_timer(struct comedi_device *dev, b_Tmp = ((devpriv-> b_DigitalOutputRegister) & 0xF0) | APCI3120_SELECT_TIMER_2_LOW_WORD; - outb(b_Tmp, devpriv->iobase + APCI3120_TIMER_CRT0); + outb(b_Tmp, dev->iobase + APCI3120_TIMER_CRT0); outw(ui_Timervalue2 & 0xffff, - devpriv->iobase + APCI3120_TIMER_VALUE); + dev->iobase + APCI3120_TIMER_VALUE); /* Writing HIGH unsigned short */ b_Tmp = ((devpriv-> b_DigitalOutputRegister) & 0xF0) | APCI3120_SELECT_TIMER_2_HIGH_WORD; - outb(b_Tmp, devpriv->iobase + APCI3120_TIMER_CRT0); + outb(b_Tmp, dev->iobase + APCI3120_TIMER_CRT0); outw((ui_Timervalue2 >> 16) & 0xffff, - devpriv->iobase + APCI3120_TIMER_VALUE); + dev->iobase + APCI3120_TIMER_VALUE); /* timer2 in Timer mode enabled */ devpriv->b_Timer2Mode = APCI3120_TIMER; @@ -1635,7 +1630,7 @@ static int apci3120_config_insn_timer(struct comedi_device *dev, (devpriv-> b_TimerSelectMode & 0x0F) | APCI3120_TIMER_2_MODE_5; outb(devpriv->b_TimerSelectMode, - devpriv->iobase + APCI3120_TIMER_CRT1); + dev->iobase + APCI3120_TIMER_CRT1); /* * Configure the timer 2 for writing the LOW unsigned short of timer @@ -1649,18 +1644,18 @@ static int apci3120_config_insn_timer(struct comedi_device *dev, b_Tmp = ((devpriv-> b_DigitalOutputRegister) & 0xF0) | APCI3120_SELECT_TIMER_2_LOW_WORD; - outb(b_Tmp, devpriv->iobase + APCI3120_TIMER_CRT0); + outb(b_Tmp, dev->iobase + APCI3120_TIMER_CRT0); outw(ui_Timervalue2 & 0xffff, - devpriv->iobase + APCI3120_TIMER_VALUE); + dev->iobase + APCI3120_TIMER_VALUE); /* Writing HIGH unsigned short */ b_Tmp = ((devpriv-> b_DigitalOutputRegister) & 0xF0) | APCI3120_SELECT_TIMER_2_HIGH_WORD; - outb(b_Tmp, devpriv->iobase + APCI3120_TIMER_CRT0); + outb(b_Tmp, dev->iobase + APCI3120_TIMER_CRT0); outw((ui_Timervalue2 >> 16) & 0xffff, - devpriv->iobase + APCI3120_TIMER_VALUE); + dev->iobase + APCI3120_TIMER_VALUE); /* watchdog enabled */ devpriv->b_Timer2Mode = APCI3120_WATCHDOG; @@ -1715,7 +1710,7 @@ static int apci3120_write_insn_timer(struct comedi_device *dev, case APCI3120_START: /* Reset FC_TIMER BIT */ - inb(devpriv->iobase + APCI3120_TIMER_STATUS_REGISTER); + inb(dev->iobase + APCI3120_TIMER_STATUS_REGISTER); if (devpriv->b_Timer2Mode == APCI3120_TIMER) { /* start timer */ /* Enable Timer */ devpriv->b_ModeSelectRegister = @@ -1745,7 +1740,7 @@ static int apci3120_write_insn_timer(struct comedi_device *dev, APCI3120_DISABLE_TIMER_INT; } outb(devpriv->b_ModeSelectRegister, - devpriv->iobase + APCI3120_WRITE_MODE_SELECT); + dev->iobase + APCI3120_WRITE_MODE_SELECT); if (devpriv->b_Timer2Mode == APCI3120_TIMER) { /* start timer */ /* For Timer mode is Gate2 must be activated timer started */ @@ -1753,7 +1748,7 @@ static int apci3120_write_insn_timer(struct comedi_device *dev, devpriv-> us_OutputRegister | APCI3120_ENABLE_TIMER2; outw(devpriv->us_OutputRegister, - devpriv->iobase + APCI3120_WR_ADDRESS); + dev->iobase + APCI3120_WR_ADDRESS); } break; @@ -1779,16 +1774,16 @@ static int apci3120_write_insn_timer(struct comedi_device *dev, /* Write above states to register */ outb(devpriv->b_ModeSelectRegister, - devpriv->iobase + APCI3120_WRITE_MODE_SELECT); + dev->iobase + APCI3120_WRITE_MODE_SELECT); /* Reset Gate 2 */ devpriv->us_OutputRegister = devpriv->us_OutputRegister & APCI3120_DISABLE_TIMER_INT; outw(devpriv->us_OutputRegister, - devpriv->iobase + APCI3120_WR_ADDRESS); + dev->iobase + APCI3120_WR_ADDRESS); /* Reset FC_TIMER BIT */ - inb(devpriv->iobase + APCI3120_TIMER_STATUS_REGISTER); + inb(dev->iobase + APCI3120_TIMER_STATUS_REGISTER); break; @@ -1798,8 +1793,7 @@ static int apci3120_write_insn_timer(struct comedi_device *dev, "timer2 not configured in TIMER MODE\n"); return -EINVAL; } - us_TmpValue = - (unsigned short) inw(devpriv->iobase + APCI3120_RD_STATUS); + us_TmpValue = inw(dev->iobase + APCI3120_RD_STATUS); /* * EL250804: Testing if board APCI3120 have the new Quartz or if it @@ -1817,19 +1811,19 @@ static int apci3120_write_insn_timer(struct comedi_device *dev, b_Tmp = ((devpriv-> b_DigitalOutputRegister) & 0xF0) | APCI3120_SELECT_TIMER_2_LOW_WORD; - outb(b_Tmp, devpriv->iobase + APCI3120_TIMER_CRT0); + outb(b_Tmp, dev->iobase + APCI3120_TIMER_CRT0); outw(ui_Timervalue2 & 0xffff, - devpriv->iobase + APCI3120_TIMER_VALUE); + dev->iobase + APCI3120_TIMER_VALUE); /* Writing HIGH unsigned short */ b_Tmp = ((devpriv-> b_DigitalOutputRegister) & 0xF0) | APCI3120_SELECT_TIMER_2_HIGH_WORD; - outb(b_Tmp, devpriv->iobase + APCI3120_TIMER_CRT0); + outb(b_Tmp, dev->iobase + APCI3120_TIMER_CRT0); outw((ui_Timervalue2 >> 16) & 0xffff, - devpriv->iobase + APCI3120_TIMER_VALUE); + dev->iobase + APCI3120_TIMER_VALUE); break; default: @@ -1866,29 +1860,29 @@ static int apci3120_read_insn_timer(struct comedi_device *dev, b_Tmp = ((devpriv-> b_DigitalOutputRegister) & 0xF0) | APCI3120_SELECT_TIMER_2_LOW_WORD; - outb(b_Tmp, devpriv->iobase + APCI3120_TIMER_CRT0); + outb(b_Tmp, dev->iobase + APCI3120_TIMER_CRT0); - us_TmpValue = inw(devpriv->iobase + APCI3120_TIMER_VALUE); + us_TmpValue = inw(dev->iobase + APCI3120_TIMER_VALUE); /* Read the HIGH unsigned short of Timer 2 register */ b_Tmp = ((devpriv-> b_DigitalOutputRegister) & 0xF0) | APCI3120_SELECT_TIMER_2_HIGH_WORD; - outb(b_Tmp, devpriv->iobase + APCI3120_TIMER_CRT0); + outb(b_Tmp, dev->iobase + APCI3120_TIMER_CRT0); - us_TmpValue_2 = inw(devpriv->iobase + APCI3120_TIMER_VALUE); + us_TmpValue_2 = inw(dev->iobase + APCI3120_TIMER_VALUE); /* combining both words */ data[0] = (unsigned int) ((us_TmpValue) | ((us_TmpValue_2) << 16)); } else { /* Read watch dog status */ - us_StatusValue = inw(devpriv->iobase + APCI3120_RD_STATUS); + us_StatusValue = inw(dev->iobase + APCI3120_RD_STATUS); us_StatusValue = ((us_StatusValue & APCI3120_FC_TIMER) >> 12) & 1; if (us_StatusValue == 1) { /* RESET FC_TIMER BIT */ - inb(devpriv->iobase + APCI3120_TIMER_STATUS_REGISTER); + inb(dev->iobase + APCI3120_TIMER_STATUS_REGISTER); } data[0] = us_StatusValue; /* when data[0] = 1 then the watch dog has rundown */ } @@ -1900,11 +1894,10 @@ static int apci3120_di_insn_bits(struct comedi_device *dev, struct comedi_insn *insn, unsigned int *data) { - struct apci3120_private *devpriv = dev->private; unsigned int val; /* the input channels are bits 11:8 of the status reg */ - val = inw(devpriv->iobase + APCI3120_RD_STATUS); + val = inw(dev->iobase + APCI3120_RD_STATUS); data[1] = (val >> 8) & 0xf; return insn->n; @@ -1922,7 +1915,7 @@ static int apci3120_do_insn_bits(struct comedi_device *dev, devpriv->b_DigitalOutputRegister = s->state << 4; outb(devpriv->b_DigitalOutputRegister, - devpriv->iobase + APCI3120_DIGITAL_OUTPUT); + dev->iobase + APCI3120_DIGITAL_OUTPUT); } data[1] = s->state; @@ -1935,7 +1928,6 @@ static int apci3120_ao_insn_write(struct comedi_device *dev, struct comedi_insn *insn, unsigned int *data) { - struct apci3120_private *devpriv = dev->private; unsigned int ui_Channel; unsigned short us_TmpValue; @@ -1944,9 +1936,7 @@ static int apci3120_ao_insn_write(struct comedi_device *dev, data[0] = ((((ui_Channel & 0x03) << 14) & 0xC000) | data[0]); do { /* Waiting of DA_READY BIT */ - us_TmpValue = - ((unsigned short) inw(devpriv->iobase + - APCI3120_RD_STATUS)) & 0x0001; + us_TmpValue = inw(dev->iobase + APCI3120_RD_STATUS) & 0x0001; } while (us_TmpValue != 0x0001); if (ui_Channel <= 3) @@ -1955,14 +1945,14 @@ static int apci3120_ao_insn_write(struct comedi_device *dev, * typecasted to ushort since word write is to be done */ outw((unsigned short) data[0], - devpriv->iobase + APCI3120_ANALOG_OUTPUT_1); + dev->iobase + APCI3120_ANALOG_OUTPUT_1); else /* * for channel 4-7 out at the register 2 (wrDac5-8) data[i] * typecasted to ushort since word write is to be done */ outw((unsigned short) data[0], - devpriv->iobase + APCI3120_ANALOG_OUTPUT_2); + dev->iobase + APCI3120_ANALOG_OUTPUT_2); return insn->n; } diff --git a/drivers/staging/comedi/drivers/addi_apci_3120.c b/drivers/staging/comedi/drivers/addi_apci_3120.c index c6f3bc940d0b..6b4a51db9c9e 100644 --- a/drivers/staging/comedi/drivers/addi_apci_3120.c +++ b/drivers/staging/comedi/drivers/addi_apci_3120.c @@ -37,7 +37,6 @@ struct apci3120_dmabuf { }; struct apci3120_private { - int iobase; unsigned long amcc; unsigned long addon; unsigned int ui_AiActualScan; @@ -136,7 +135,6 @@ static int apci3120_auto_attach(struct comedi_device *dev, pci_set_master(pcidev); dev->iobase = pci_resource_start(pcidev, 1); - devpriv->iobase = dev->iobase; devpriv->amcc = pci_resource_start(pcidev, 0); devpriv->addon = pci_resource_start(pcidev, 2);