From: David S. Miller Date: Thu, 19 Feb 2015 20:52:33 +0000 (-0500) Subject: Merge branch 'mv88e6171_indirect_phy' X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=69994d17abe90c4ae449dfcefbae9754f92c36bd;p=linux-beck.git Merge branch 'mv88e6171_indirect_phy' Andrew Lunn says: ==================== Indirect phy access for mv88e6171 These two patches allow the mv88e6171 driver to access the port phys using indirect addressing. Depending on pin strapping, the switch either uses a single address on the host MDIO bus, requiring the port phys are accessed indirectly, or the switch uses a number of addresses on the host bus and the phys can be directly accessed. The 370RD, the first supported platform to use the 6171 uses multiple addresses, so this indirect mode was not required. However the WRT1900AC has the switch configured to use a single address, and so indirect access is needed. The mv88e6352 already has all the needed code. Refactor it into the shared mv88e6xxx and then use it in the mv88e6171 driver. Tested on the 370RD and WRT1900AC. It would be good if Guenter Roeck could test on his platform to ensure i've not broken anything for the mv88e6352. ==================== Signed-off-by: David S. Miller --- 69994d17abe90c4ae449dfcefbae9754f92c36bd