From: Hans de Goede Date: Fri, 3 Oct 2014 14:58:04 +0000 (+0200) Subject: sunxi: Enable second sdcard slot found on some boards X-Git-Tag: KARO-TXA5-2015-06-26~444^2~18 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=69c050a6715995e666b3ece028db6a8f75dc502c;p=karo-tx-uboot.git sunxi: Enable second sdcard slot found on some boards Enable the second sdcard slot found on some boards. Note that we do not set CONFIG_MMC_SUNXI_SLOT_EXTRA for the SPL, as having it there is not useful, Except for on the Mele-M3 where the second sdcard is an eMMC, from which the device can also boot, and there we want to have both in the SPL, so that a single u-boot binary can both from both. So for the M3 we do prefix the defconfig setting with the special "+S:" syntax so that it applies to the SPL too. Signed-off-by: Hans de Goede Acked-by: Ian Campbell --- diff --git a/configs/A10s-OLinuXino-M_defconfig b/configs/A10s-OLinuXino-M_defconfig index a578c067d4..2aad834fa8 100644 --- a/configs/A10s-OLinuXino-M_defconfig +++ b/configs/A10s-OLinuXino-M_defconfig @@ -1,5 +1,8 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="A10S_OLINUXINO_M,AXP152_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPB(10)" CONFIG_FDTFILE="sun5i-a10s-olinuxino-micro.dtb" +CONFIG_MMC_SUNXI_SLOT_EXTRA=1 ++S:CONFIG_MMC0_CD_PIN="PG1" ++S:CONFIG_MMC1_CD_PIN="PG13" +S:CONFIG_ARM=y +S:CONFIG_TARGET_SUN5I=y diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig index 20a947ca72..0e0a7def2d 100644 --- a/configs/A20-OLinuXino_MICRO_defconfig +++ b/configs/A20-OLinuXino_MICRO_defconfig @@ -1,5 +1,8 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="A20_OLINUXINO_M,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI" CONFIG_FDTFILE="sun7i-a20-olinuxino-micro.dtb" +CONFIG_MMC_SUNXI_SLOT_EXTRA=3 ++S:CONFIG_MMC0_CD_PIN="PH1" ++S:CONFIG_MMC3_CD_PIN="PH11" +S:CONFIG_ARM=y +S:CONFIG_TARGET_SUN7I=y diff --git a/configs/Mele_M3_defconfig b/configs/Mele_M3_defconfig index 645b236da6..a043ad277d 100644 --- a/configs/Mele_M3_defconfig +++ b/configs/Mele_M3_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="MELE_M3,AXP209_POWER,SUNXI_GMAC,USB_EHCI" CONFIG_FDTFILE="sun7i-a20-m3.dtb" ++S:CONFIG_MMC_SUNXI_SLOT_EXTRA=2 ++S:CONFIG_MMC0_CD_PIN="PH1" +S:CONFIG_ARM=y +S:CONFIG_TARGET_SUN7I=y