From: Greg Ungerer <gerg@uclinux.org>
Date: Fri, 23 Dec 2011 14:43:13 +0000 (+1000)
Subject: m68knommu: make 5407 UART platform addressing consistent
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=69d23b610a04e269d6a094e6f3e37d85d6b2784a;p=mv-sheeva.git

m68knommu: make 5407 UART platform addressing consistent

If we make all UART addressing consistent across all ColdFire family members
then we will be able to remove the duplicated plaform data and use a single
setup for all.

So modify the ColdFire 5407 UART addressing so that:

. UARTs are numbered from 0 up
. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---

diff --git a/arch/m68k/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h
index 51e00b00b8a..79f58dd6a83 100644
--- a/arch/m68k/include/asm/m5407sim.h
+++ b/arch/m68k/include/asm/m5407sim.h
@@ -85,8 +85,8 @@
 #define MCFTIMER_BASE1		(MCF_MBAR + 0x140)	/* Base of TIMER1 */
 #define MCFTIMER_BASE2		(MCF_MBAR + 0x180)	/* Base of TIMER2 */
 
-#define MCFUART_BASE1		0x1c0           /* Base address of UART1 */
-#define MCFUART_BASE2		0x200           /* Base address of UART2 */
+#define MCFUART_BASE0		(MCF_MBAR + 0x1c0)	/* Base address UART0 */
+#define MCFUART_BASE1		(MCF_MBAR + 0x200)	/* Base address UART1 */
 
 #define	MCFSIM_PADDR		(MCF_MBAR + 0x244)
 #define	MCFSIM_PADAT		(MCF_MBAR + 0x248)
@@ -139,6 +139,8 @@
  */
 #define	MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
 #define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
+#define	MCF_IRQ_UART0		73		/* UART0 */
+#define	MCF_IRQ_UART1		74		/* UART1 */
 
 /****************************************************************************/
 #endif	/* m5407sim_h */
diff --git a/arch/m68k/platform/5407/config.c b/arch/m68k/platform/5407/config.c
index 4861be602dc..f8ed5856d7c 100644
--- a/arch/m68k/platform/5407/config.c
+++ b/arch/m68k/platform/5407/config.c
@@ -22,12 +22,12 @@
 
 static struct mcf_platform_uart m5407_uart_platform[] = {
 	{
-		.mapbase	= MCF_MBAR + MCFUART_BASE1,
-		.irq		= 73,
+		.mapbase	= MCFUART_BASE0,
+		.irq		= MCF_IRQ_UART0,
 	},
 	{
-		.mapbase 	= MCF_MBAR + MCFUART_BASE2,
-		.irq		= 74,
+		.mapbase 	= MCFUART_BASE1,
+		.irq		= MCF_IRQ_UART1,
 	},
 	{ },
 };
@@ -48,11 +48,11 @@ static void __init m5407_uart_init_line(int line, int irq)
 {
 	if (line == 0) {
 		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
-		writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR);
+		writeb(irq, MCFUART_BASE0 + MCFUART_UIVR);
 		mcf_mapirq2imr(irq, MCFINTC_UART0);
 	} else if (line == 1) {
 		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
-		writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR);
+		writeb(irq, MCFUART_BASE1 + MCFUART_UIVR);
 		mcf_mapirq2imr(irq, MCFINTC_UART1);
 	}
 }