From: Sylwester Nawrocki Date: Fri, 25 Nov 2011 23:37:23 +0000 (-0300) Subject: [media] m5mols: Simplify the I2C registers definition X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=69eb18032017082bb1c54236290c7e3578e0a3d3;p=mv-sheeva.git [media] m5mols: Simplify the I2C registers definition The redundant definitions of the m5mols I2C register addresses within the pages (categories) are removed. In place of symbolic definitions plain numbers are used which simplifies the code and eases identifying the registers in the documentation. Also make the m5mols_busy() function accept I2C_REG() value as a register address, like all other functions, rather than using the category and command values. Acked-by: HeungJun Kim Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/video/m5mols/m5mols.h b/drivers/media/video/m5mols/m5mols.h index 82c8817bd32..42c494c1e58 100644 --- a/drivers/media/video/m5mols/m5mols.h +++ b/drivers/media/video/m5mols/m5mols.h @@ -257,7 +257,7 @@ int m5mols_read_u8(struct v4l2_subdev *sd, u32 reg_comb, u8 *val); int m5mols_read_u16(struct v4l2_subdev *sd, u32 reg_comb, u16 *val); int m5mols_read_u32(struct v4l2_subdev *sd, u32 reg_comb, u32 *val); int m5mols_write(struct v4l2_subdev *sd, u32 reg_comb, u32 val); -int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u8 value); +int m5mols_busy(struct v4l2_subdev *sd, u32 reg, u8 value); /* * Mode operation of the M-5MOLS diff --git a/drivers/media/video/m5mols/m5mols_core.c b/drivers/media/video/m5mols/m5mols_core.c index e0f09e53180..10170b89ab5 100644 --- a/drivers/media/video/m5mols/m5mols_core.c +++ b/drivers/media/video/m5mols/m5mols_core.c @@ -272,14 +272,14 @@ int m5mols_write(struct v4l2_subdev *sd, u32 reg, u32 val) return 0; } -int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u8 mask) +int m5mols_busy(struct v4l2_subdev *sd, u32 reg, u8 mask) { u8 busy; int i; int ret; for (i = 0; i < M5MOLS_I2C_CHECK_RETRY; i++) { - ret = m5mols_read_u8(sd, I2C_REG(category, cmd, 1), &busy); + ret = m5mols_read_u8(sd, reg, &busy); if (ret < 0) return ret; if ((busy & mask) == mask) @@ -317,7 +317,7 @@ static int m5mols_reg_mode(struct v4l2_subdev *sd, u8 mode) { int ret = m5mols_write(sd, SYSTEM_SYSMODE, mode); - return ret ? ret : m5mols_busy(sd, CAT_SYSTEM, CAT0_SYSMODE, mode); + return ret ? ret : m5mols_busy(sd, mode, SYSTEM_SYSMODE); } /** @@ -829,8 +829,7 @@ static int m5mols_s_power(struct v4l2_subdev *sd, int on) if (!ret) ret = m5mols_write(sd, AF_MODE, REG_AF_POWEROFF); if (!ret) - ret = m5mols_busy(sd, CAT_SYSTEM, CAT0_STATUS, - REG_AF_IDLE); + ret = m5mols_busy(sd, SYSTEM_STATUS, REG_AF_IDLE); if (!ret) v4l2_info(sd, "Success soft-landing lens\n"); } diff --git a/drivers/media/video/m5mols/m5mols_reg.h b/drivers/media/video/m5mols/m5mols_reg.h index c755bd6edfe..d488add006d 100644 --- a/drivers/media/video/m5mols/m5mols_reg.h +++ b/drivers/media/video/m5mols/m5mols_reg.h @@ -55,39 +55,31 @@ * There is many registers between customer version address and awb one. For * more specific contents, see definition if file m5mols.h. */ -#define CAT0_VER_CUSTOMER 0x00 /* customer version */ -#define CAT0_VER_PROJECT 0x01 /* project version */ -#define CAT0_VER_FIRMWARE 0x02 /* Firmware version */ -#define CAT0_VER_HARDWARE 0x04 /* Hardware version */ -#define CAT0_VER_PARAMETER 0x06 /* Parameter version */ -#define CAT0_VER_AWB 0x08 /* Auto WB version */ -#define CAT0_VER_STRING 0x0a /* string including M-5MOLS */ -#define CAT0_SYSMODE 0x0b /* SYSTEM mode register */ -#define CAT0_STATUS 0x0c /* SYSTEM mode status register */ -#define CAT0_INT_FACTOR 0x10 /* interrupt pending register */ -#define CAT0_INT_ENABLE 0x11 /* interrupt enable register */ - -#define SYSTEM_VER_CUSTOMER I2C_REG(CAT_SYSTEM, CAT0_VER_CUSTOMER, 1) -#define SYSTEM_VER_PROJECT I2C_REG(CAT_SYSTEM, CAT0_VER_PROJECT, 1) -#define SYSTEM_VER_FIRMWARE I2C_REG(CAT_SYSTEM, CAT0_VER_FIRMWARE, 2) -#define SYSTEM_VER_HARDWARE I2C_REG(CAT_SYSTEM, CAT0_VER_HARDWARE, 2) -#define SYSTEM_VER_PARAMETER I2C_REG(CAT_SYSTEM, CAT0_VER_PARAMETER, 2) -#define SYSTEM_VER_AWB I2C_REG(CAT_SYSTEM, CAT0_VER_AWB, 2) - -#define SYSTEM_SYSMODE I2C_REG(CAT_SYSTEM, CAT0_SYSMODE, 1) +#define SYSTEM_VER_CUSTOMER I2C_REG(CAT_SYSTEM, 0x00, 1) +#define SYSTEM_VER_PROJECT I2C_REG(CAT_SYSTEM, 0x01, 1) +#define SYSTEM_VER_FIRMWARE I2C_REG(CAT_SYSTEM, 0x02, 2) +#define SYSTEM_VER_HARDWARE I2C_REG(CAT_SYSTEM, 0x04, 2) +#define SYSTEM_VER_PARAMETER I2C_REG(CAT_SYSTEM, 0x06, 2) +#define SYSTEM_VER_AWB I2C_REG(CAT_SYSTEM, 0x08, 2) + +#define SYSTEM_SYSMODE I2C_REG(CAT_SYSTEM, 0x0b, 1) #define REG_SYSINIT 0x00 /* SYSTEM mode */ #define REG_PARAMETER 0x01 /* PARAMETER mode */ #define REG_MONITOR 0x02 /* MONITOR mode */ #define REG_CAPTURE 0x03 /* CAPTURE mode */ #define SYSTEM_CMD(__cmd) I2C_REG(CAT_SYSTEM, cmd, 1) -#define SYSTEM_VER_STRING I2C_REG(CAT_SYSTEM, CAT0_VER_STRING, 1) +#define SYSTEM_VER_STRING I2C_REG(CAT_SYSTEM, 0x0a, 1) #define REG_SAMSUNG_ELECTRO "SE" /* Samsung Electro-Mechanics */ #define REG_SAMSUNG_OPTICS "OP" /* Samsung Fiber-Optics */ #define REG_SAMSUNG_TECHWIN "TB" /* Samsung Techwin */ +/* SYSTEM mode status */ +#define SYSTEM_STATUS I2C_REG(CAT_SYSTEM, 0x0c, 1) -#define SYSTEM_INT_FACTOR I2C_REG(CAT_SYSTEM, CAT0_INT_FACTOR, 1) -#define SYSTEM_INT_ENABLE I2C_REG(CAT_SYSTEM, CAT0_INT_ENABLE, 1) +/* Interrupt pending register */ +#define SYSTEM_INT_FACTOR I2C_REG(CAT_SYSTEM, 0x10, 1) +/* interrupt enable register */ +#define SYSTEM_INT_ENABLE I2C_REG(CAT_SYSTEM, 0x11, 1) #define REG_INT_MODE (1 << 0) #define REG_INT_AF (1 << 1) #define REG_INT_ZOOM (1 << 2) @@ -105,20 +97,20 @@ * can handle with preview(MONITOR) resolution size/frame per second/interface * between the sensor and the Application Processor/even the image effect. */ -#define CAT1_DATA_INTERFACE 0x00 /* interface between sensor and AP */ -#define CAT1_MONITOR_SIZE 0x01 /* resolution at the MONITOR mode */ -#define CAT1_MONITOR_FPS 0x02 /* frame per second at this mode */ -#define CAT1_EFFECT 0x0b /* image effects */ -#define PARM_MON_SIZE I2C_REG(CAT_PARAM, CAT1_MONITOR_SIZE, 1) +/* Resolution in the MONITOR mode */ +#define PARM_MON_SIZE I2C_REG(CAT_PARAM, 0x01, 1) -#define PARM_MON_FPS I2C_REG(CAT_PARAM, CAT1_MONITOR_FPS, 1) +/* Frame rate */ +#define PARM_MON_FPS I2C_REG(CAT_PARAM, 0x02, 1) #define REG_FPS_30 0x02 -#define PARM_INTERFACE I2C_REG(CAT_PARAM, CAT1_DATA_INTERFACE, 1) +/* Video bus between the sensor and a host processor */ +#define PARM_INTERFACE I2C_REG(CAT_PARAM, 0x00, 1) #define REG_INTERFACE_MIPI 0x02 -#define PARM_EFFECT I2C_REG(CAT_PARAM, CAT1_EFFECT, 1) +/* Image effects */ +#define PARM_EFFECT I2C_REG(CAT_PARAM, 0x0b, 1) #define REG_EFFECT_OFF 0x00 #define REG_EFFECT_NEGA 0x01 #define REG_EFFECT_EMBOSS 0x06 @@ -135,39 +127,37 @@ * another options like zoom/color effect(different with effect in PARAMETER * mode)/anti hand shaking algorithm. */ -#define CAT2_ZOOM 0x01 /* set the zoom position & execute */ -#define CAT2_ZOOM_STEP 0x03 /* set the zoom step */ -#define CAT2_CFIXB 0x09 /* CB value for color effect */ -#define CAT2_CFIXR 0x0a /* CR value for color effect */ -#define CAT2_COLOR_EFFECT 0x0b /* set on/off of color effect */ -#define CAT2_CHROMA_LVL 0x0f /* set chroma level */ -#define CAT2_CHROMA_EN 0x10 /* set on/off of choroma */ -#define CAT2_EDGE_LVL 0x11 /* set sharpness level */ -#define CAT2_EDGE_EN 0x12 /* set on/off sharpness */ -#define CAT2_TONE_CTL 0x25 /* set tone color(contrast) */ - -#define MON_ZOOM I2C_REG(CAT_MONITOR, CAT2_ZOOM, 1) - -#define MON_CFIXR I2C_REG(CAT_MONITOR, CAT2_CFIXR, 1) -#define MON_CFIXB I2C_REG(CAT_MONITOR, CAT2_CFIXB, 1) + +/* Target digital zoom position */ +#define MON_ZOOM I2C_REG(CAT_MONITOR, 0x01, 1) + +/* CR value for color effect */ +#define MON_CFIXR I2C_REG(CAT_MONITOR, 0x0a, 1) +/* CB value for color effect */ +#define MON_CFIXB I2C_REG(CAT_MONITOR, 0x09, 1) #define REG_CFIXB_SEPIA 0xd8 #define REG_CFIXR_SEPIA 0x18 -#define MON_EFFECT I2C_REG(CAT_MONITOR, CAT2_COLOR_EFFECT, 1) +#define MON_EFFECT I2C_REG(CAT_MONITOR, 0x0b, 1) #define REG_COLOR_EFFECT_OFF 0x00 #define REG_COLOR_EFFECT_ON 0x01 -#define MON_CHROMA_EN I2C_REG(CAT_MONITOR, CAT2_CHROMA_EN, 1) -#define MON_CHROMA_LVL I2C_REG(CAT_MONITOR, CAT2_CHROMA_LVL, 1) +/* Chroma enable */ +#define MON_CHROMA_EN I2C_REG(CAT_MONITOR, 0x10, 1) +/* Chroma level */ +#define MON_CHROMA_LVL I2C_REG(CAT_MONITOR, 0x0f, 1) #define REG_CHROMA_OFF 0x00 #define REG_CHROMA_ON 0x01 -#define MON_EDGE_EN I2C_REG(CAT_MONITOR, CAT2_EDGE_EN, 1) -#define MON_EDGE_LVL I2C_REG(CAT_MONITOR, CAT2_EDGE_LVL, 1) +/* Sharpness on/off */ +#define MON_EDGE_EN I2C_REG(CAT_MONITOR, 0x12, 1) +/* Sharpness level */ +#define MON_EDGE_LVL I2C_REG(CAT_MONITOR, 0x11, 1) #define REG_EDGE_OFF 0x00 #define REG_EDGE_ON 0x01 -#define MON_TONE_CTL I2C_REG(CAT_MONITOR, CAT2_TONE_CTL, 1) +/* Set color tone (contrast) */ +#define MON_TONE_CTL I2C_REG(CAT_MONITOR, 0x25, 1) /* * Category 3 - Auto Exposure @@ -179,27 +169,20 @@ * different. So, this category also provide getting the max/min values. And, * each MONITOR and CAPTURE mode has each gain/shutter/max exposure values. */ -#define CAT3_AE_LOCK 0x00 /* locking Auto exposure */ -#define CAT3_AE_MODE 0x01 /* set AE mode, mode means range */ -#define CAT3_ISO 0x05 /* set ISO */ -#define CAT3_EV_PRESET_MONITOR 0x0a /* EV(scenemode) preset for MONITOR */ -#define CAT3_EV_PRESET_CAPTURE 0x0b /* EV(scenemode) preset for CAPTURE */ -#define CAT3_MANUAL_GAIN_MON 0x12 /* meteoring value for the MONITOR */ -#define CAT3_MAX_GAIN_MON 0x1a /* max gain value for the MONITOR */ -#define CAT3_MANUAL_GAIN_CAP 0x26 /* meteoring value for the CAPTURE */ -#define CAT3_AE_INDEX 0x38 /* AE index */ - -#define AE_LOCK I2C_REG(CAT_AE, CAT3_AE_LOCK, 1) + +/* Auto Exposure locking */ +#define AE_LOCK I2C_REG(CAT_AE, 0x00, 1) #define REG_AE_UNLOCK 0x00 #define REG_AE_LOCK 0x01 -#define AE_MODE I2C_REG(CAT_AE, CAT3_AE_MODE, 1) +/* Auto Exposure algorithm mode */ +#define AE_MODE I2C_REG(CAT_AE, 0x01, 1) #define REG_AE_OFF 0x00 /* AE off */ #define REG_AE_ALL 0x01 /* calc AE in all block integral */ #define REG_AE_CENTER 0x03 /* calc AE in center weighted */ #define REG_AE_SPOT 0x06 /* calc AE in specific spot */ -#define AE_ISO I2C_REG(CAT_AE, CAT3_ISO, 1) +#define AE_ISO I2C_REG(CAT_AE, 0x05, 1) #define REG_ISO_AUTO 0x00 #define REG_ISO_50 0x01 #define REG_ISO_100 0x02 @@ -207,8 +190,10 @@ #define REG_ISO_400 0x04 #define REG_ISO_800 0x05 -#define AE_EV_PRESET_MONITOR I2C_REG(CAT_AE, CAT3_EV_PRESET_MONITOR, 1) -#define AE_EV_PRESET_CAPTURE I2C_REG(CAT_AE, CAT3_EV_PRESET_CAPTURE, 1) +/* EV (scenemode) preset for MONITOR */ +#define AE_EV_PRESET_MONITOR I2C_REG(CAT_AE, 0x0a, 1) +/* EV (scenemode) preset for CAPTURE */ +#define AE_EV_PRESET_CAPTURE I2C_REG(CAT_AE, 0x0b, 1) #define REG_SCENE_NORMAL 0x00 #define REG_SCENE_PORTRAIT 0x01 #define REG_SCENE_LANDSCAPE 0x02 @@ -224,11 +209,14 @@ #define REG_SCENE_TEXT 0x0c #define REG_SCENE_CANDLE 0x0d -#define AE_MAN_GAIN_MON I2C_REG(CAT_AE, CAT3_MANUAL_GAIN_MON, 2) -#define AE_MAX_GAIN_MON I2C_REG(CAT_AE, CAT3_MAX_GAIN_MON, 2) -#define AE_MAN_GAIN_CAP I2C_REG(CAT_AE, CAT3_MANUAL_GAIN_CAP, 2) +/* Manual gain in MONITOR mode */ +#define AE_MAN_GAIN_MON I2C_REG(CAT_AE, 0x12, 2) +/* Maximum gain in MONITOR mode */ +#define AE_MAX_GAIN_MON I2C_REG(CAT_AE, 0x1a, 2) +/* Manual gain in CAPTURE mode */ +#define AE_MAN_GAIN_CAP I2C_REG(CAT_AE, 0x26, 2) -#define AE_INDEX I2C_REG(CAT_AE, CAT3_AE_INDEX, 1) +#define AE_INDEX I2C_REG(CAT_AE, 0x38, 1) #define REG_AE_INDEX_20_NEG 0x00 #define REG_AE_INDEX_15_NEG 0x01 #define REG_AE_INDEX_10_NEG 0x02 @@ -241,22 +229,19 @@ /* * Category 6 - White Balance - * - * This category provide AWB locking/mode/preset/speed/gain bias, etc. */ -#define CAT6_AWB_LOCK 0x00 /* locking Auto Whitebalance */ -#define CAT6_AWB_MODE 0x02 /* set Auto or Manual */ -#define CAT6_AWB_MANUAL 0x03 /* set Manual(preset) value */ -#define AWB_LOCK I2C_REG(CAT_WB, CAT6_AWB_LOCK, 1) +/* Auto Whitebalance locking */ +#define AWB_LOCK I2C_REG(CAT_WB, 0x00, 1) #define REG_AWB_UNLOCK 0x00 #define REG_AWB_LOCK 0x01 -#define AWB_MODE I2C_REG(CAT_WB, CAT6_AWB_MODE, 1) +#define AWB_MODE I2C_REG(CAT_WB, 0x02, 1) #define REG_AWB_AUTO 0x01 /* AWB off */ #define REG_AWB_PRESET 0x02 /* AWB preset */ -#define AWB_MANUAL I2C_REG(CAT_WB, CAT6_AWB_MANUAL, 1) +/* Manual WB (preset) */ +#define AWB_MANUAL I2C_REG(CAT_WB, 0x03, 1) #define REG_AWB_INCANDESCENT 0x01 #define REG_AWB_FLUORESCENT_1 0x02 #define REG_AWB_FLUORESCENT_2 0x03 @@ -269,42 +254,25 @@ /* * Category 7 - EXIF information */ -#define CAT7_INFO_EXPTIME_NU 0x00 -#define CAT7_INFO_EXPTIME_DE 0x04 -#define CAT7_INFO_TV_NU 0x08 -#define CAT7_INFO_TV_DE 0x0c -#define CAT7_INFO_AV_NU 0x10 -#define CAT7_INFO_AV_DE 0x14 -#define CAT7_INFO_BV_NU 0x18 -#define CAT7_INFO_BV_DE 0x1c -#define CAT7_INFO_EBV_NU 0x20 -#define CAT7_INFO_EBV_DE 0x24 -#define CAT7_INFO_ISO 0x28 -#define CAT7_INFO_FLASH 0x2a -#define CAT7_INFO_SDR 0x2c -#define CAT7_INFO_QVAL 0x2e - -#define EXIF_INFO_EXPTIME_NU I2C_REG(CAT_EXIF, CAT7_INFO_EXPTIME_NU, 4) -#define EXIF_INFO_EXPTIME_DE I2C_REG(CAT_EXIF, CAT7_INFO_EXPTIME_DE, 4) -#define EXIF_INFO_TV_NU I2C_REG(CAT_EXIF, CAT7_INFO_TV_NU, 4) -#define EXIF_INFO_TV_DE I2C_REG(CAT_EXIF, CAT7_INFO_TV_DE, 4) -#define EXIF_INFO_AV_NU I2C_REG(CAT_EXIF, CAT7_INFO_AV_NU, 4) -#define EXIF_INFO_AV_DE I2C_REG(CAT_EXIF, CAT7_INFO_AV_DE, 4) -#define EXIF_INFO_BV_NU I2C_REG(CAT_EXIF, CAT7_INFO_BV_NU, 4) -#define EXIF_INFO_BV_DE I2C_REG(CAT_EXIF, CAT7_INFO_BV_DE, 4) -#define EXIF_INFO_EBV_NU I2C_REG(CAT_EXIF, CAT7_INFO_EBV_NU, 4) -#define EXIF_INFO_EBV_DE I2C_REG(CAT_EXIF, CAT7_INFO_EBV_DE, 4) -#define EXIF_INFO_ISO I2C_REG(CAT_EXIF, CAT7_INFO_ISO, 2) -#define EXIF_INFO_FLASH I2C_REG(CAT_EXIF, CAT7_INFO_FLASH, 2) -#define EXIF_INFO_SDR I2C_REG(CAT_EXIF, CAT7_INFO_SDR, 2) -#define EXIF_INFO_QVAL I2C_REG(CAT_EXIF, CAT7_INFO_QVAL, 2) +#define EXIF_INFO_EXPTIME_NU I2C_REG(CAT_EXIF, 0x00, 4) +#define EXIF_INFO_EXPTIME_DE I2C_REG(CAT_EXIF, 0x04, 4) +#define EXIF_INFO_TV_NU I2C_REG(CAT_EXIF, 0x08, 4) +#define EXIF_INFO_TV_DE I2C_REG(CAT_EXIF, 0x0c, 4) +#define EXIF_INFO_AV_NU I2C_REG(CAT_EXIF, 0x10, 4) +#define EXIF_INFO_AV_DE I2C_REG(CAT_EXIF, 0x14, 4) +#define EXIF_INFO_BV_NU I2C_REG(CAT_EXIF, 0x18, 4) +#define EXIF_INFO_BV_DE I2C_REG(CAT_EXIF, 0x1c, 4) +#define EXIF_INFO_EBV_NU I2C_REG(CAT_EXIF, 0x20, 4) +#define EXIF_INFO_EBV_DE I2C_REG(CAT_EXIF, 0x24, 4) +#define EXIF_INFO_ISO I2C_REG(CAT_EXIF, 0x28, 2) +#define EXIF_INFO_FLASH I2C_REG(CAT_EXIF, 0x2a, 2) +#define EXIF_INFO_SDR I2C_REG(CAT_EXIF, 0x2c, 2) +#define EXIF_INFO_QVAL I2C_REG(CAT_EXIF, 0x2e, 2) /* * Category 9 - Face Detection */ -#define CAT9_FD_CTL 0x00 - -#define FD_CTL I2C_REG(CAT_FD, CAT9_FD_CTL, 1) +#define FD_CTL I2C_REG(CAT_FD, 0x00, 1) #define BIT_FD_EN 0 #define BIT_FD_DRAW_FACE_FRAME 4 #define BIT_FD_DRAW_SMILE_LVL 6 @@ -314,62 +282,50 @@ /* * Category A - Lens Parameter */ -#define CATA_AF_MODE 0x01 -#define CATA_AF_EXECUTE 0x02 -#define CATA_AF_STATUS 0x03 -#define CATA_AF_VERSION 0x0a - -#define AF_MODE I2C_REG(CAT_LENS, CATA_AF_MODE, 1) +#define AF_MODE I2C_REG(CAT_LENS, 0x01, 1) #define REG_AF_NORMAL 0x00 /* Normal AF, one time */ #define REG_AF_MACRO 0x01 /* Macro AF, one time */ #define REG_AF_POWEROFF 0x07 -#define AF_EXECUTE I2C_REG(CAT_LENS, CATA_AF_EXECUTE, 1) +#define AF_EXECUTE I2C_REG(CAT_LENS, 0x02, 1) #define REG_AF_STOP 0x00 #define REG_AF_EXE_AUTO 0x01 #define REG_AF_EXE_CAF 0x02 -#define AF_STATUS I2C_REG(CAT_LENS, CATA_AF_STATUS, 1) +#define AF_STATUS I2C_REG(CAT_LENS, 0x03, 1) #define REG_AF_FAIL 0x00 #define REG_AF_SUCCESS 0x02 #define REG_AF_IDLE 0x04 #define REG_AF_BUSY 0x05 -#define AF_VERSION I2C_REG(CAT_LENS, CATA_AF_VERSION, 1) +#define AF_VERSION I2C_REG(CAT_LENS, 0x0a, 1) /* * Category B - CAPTURE Parameter */ -#define CATB_YUVOUT_MAIN 0x00 -#define CATB_MAIN_IMAGE_SIZE 0x01 -#define CATB_MCC_MODE 0x1d -#define CATB_WDR_EN 0x2c -#define CATB_LIGHT_CTRL 0x40 -#define CATB_FLASH_CTRL 0x41 - -#define CAPP_YUVOUT_MAIN I2C_REG(CAT_CAPT_PARM, CATB_YUVOUT_MAIN, 1) +#define CAPP_YUVOUT_MAIN I2C_REG(CAT_CAPT_PARM, 0x00, 1) #define REG_YUV422 0x00 #define REG_BAYER10 0x05 #define REG_BAYER8 0x06 #define REG_JPEG 0x10 -#define CAPP_MAIN_IMAGE_SIZE I2C_REG(CAT_CAPT_PARM, CATB_MAIN_IMAGE_SIZE, 1) +#define CAPP_MAIN_IMAGE_SIZE I2C_REG(CAT_CAPT_PARM, 0x01, 1) -#define CAPP_MCC_MODE I2C_REG(CAT_CAPT_PARM, CATB_MCC_MODE, 1) +#define CAPP_MCC_MODE I2C_REG(CAT_CAPT_PARM, 0x1d, 1) #define REG_MCC_OFF 0x00 #define REG_MCC_NORMAL 0x01 -#define CAPP_WDR_EN I2C_REG(CAT_CAPT_PARM, CATB_WDR_EN, 1) +#define CAPP_WDR_EN I2C_REG(CAT_CAPT_PARM, 0x2c, 1) #define REG_WDR_OFF 0x00 #define REG_WDR_ON 0x01 #define REG_WDR_AUTO 0x02 -#define CAPP_LIGHT_CTRL I2C_REG(CAT_CAPT_PARM, CATB_LIGHT_CTRL, 1) +#define CAPP_LIGHT_CTRL I2C_REG(CAT_CAPT_PARM, 0x40, 1) #define REG_LIGHT_OFF 0x00 #define REG_LIGHT_ON 0x01 #define REG_LIGHT_AUTO 0x02 -#define CAPP_FLASH_CTRL I2C_REG(CAT_CAPT_PARM, CATB_FLASH_CTRL, 1) +#define CAPP_FLASH_CTRL I2C_REG(CAT_CAPT_PARM, 0x41, 1) #define REG_FLASH_OFF 0x00 #define REG_FLASH_ON 0x01 #define REG_FLASH_AUTO 0x02 @@ -377,34 +333,28 @@ /* * Category C - CAPTURE Control */ -#define CATC_CAP_MODE 0x00 -#define CATC_CAP_SEL_FRAME 0x06 /* It determines Single or Multi */ -#define CATC_CAP_START 0x09 -#define CATC_CAP_IMAGE_SIZE 0x0d -#define CATC_CAP_THUMB_SIZE 0x11 - -#define CAPC_MODE I2C_REG(CAT_CAPT_CTRL, CATC_CAP_MODE, 1) +#define CAPC_MODE I2C_REG(CAT_CAPT_CTRL, 0x00, 1) #define REG_CAP_NONE 0x00 #define REG_CAP_ANTI_SHAKE 0x02 -#define CAPC_SEL_FRAME I2C_REG(CAT_CAPT_CTRL, CATC_CAP_SEL_FRAME, 1) +/* Select single- or multi-shot capture */ +#define CAPC_SEL_FRAME I2C_REG(CAT_CAPT_CTRL, 0x06, 1) -#define CAPC_START I2C_REG(CAT_CAPT_CTRL, CATC_CAP_START, 1) +#define CAPC_START I2C_REG(CAT_CAPT_CTRL, 0x09, 1) #define REG_CAP_START_MAIN 0x01 #define REG_CAP_START_THUMB 0x03 -#define CAPC_IMAGE_SIZE I2C_REG(CAT_CAPT_CTRL, CATC_CAP_IMAGE_SIZE, 4) -#define CAPC_THUMB_SIZE I2C_REG(CAT_CAPT_CTRL, CATC_CAP_THUMB_SIZE, 4) +#define CAPC_IMAGE_SIZE I2C_REG(CAT_CAPT_CTRL, 0x0d, 4) +#define CAPC_THUMB_SIZE I2C_REG(CAT_CAPT_CTRL, 0x11, 4) /* * Category F - Flash * * This mode provides functions about internal flash stuff and system startup. */ -#define CATF_CAM_START 0x12 /* It starts internal ARM core booting - * after power-up */ -#define FLASH_CAM_START I2C_REG(CAT_FLASH, CATF_CAM_START, 1) +/* Starts internal ARM core booting after power-up */ +#define FLASH_CAM_START I2C_REG(CAT_FLASH, 0x12, 1) #define REG_START_ARM_BOOT 0x01 #endif /* M5MOLS_REG_H */