From: Jacob Keller <jacob.e.keller@intel.com>
Date: Fri, 18 Oct 2013 05:09:24 +0000 (+0000)
Subject: ixgbe: remove unnecessary duplication of PCIe bandwidth display
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=6a2aae5ae620ebf5e49f36eb937f2214c6630430;p=linux-beck.git

ixgbe: remove unnecessary duplication of PCIe bandwidth display

This patch removes the unnecessary display of PCIe bandwidth twice. Since the
ixgbe_check_minimum_link does a better job, and ensures accurate detection on
even complex chains, this older check is no longer necessary.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 9753c8a07e8d..a7d1a1c43f12 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -7752,29 +7752,6 @@ skip_sriov:
 	if (ixgbe_pcie_from_parent(hw))
 		ixgbe_get_parent_bus_info(adapter);
 
-	/* print bus type/speed/width info */
-	e_dev_info("(PCI Express:%s:%s) %pM\n",
-		   (hw->bus.speed == ixgbe_bus_speed_8000 ? "8.0GT/s" :
-		    hw->bus.speed == ixgbe_bus_speed_5000 ? "5.0GT/s" :
-		    hw->bus.speed == ixgbe_bus_speed_2500 ? "2.5GT/s" :
-		    "Unknown"),
-		   (hw->bus.width == ixgbe_bus_width_pcie_x8 ? "Width x8" :
-		    hw->bus.width == ixgbe_bus_width_pcie_x4 ? "Width x4" :
-		    hw->bus.width == ixgbe_bus_width_pcie_x1 ? "Width x1" :
-		    "Unknown"),
-		   netdev->dev_addr);
-
-	err = ixgbe_read_pba_string_generic(hw, part_str, IXGBE_PBANUM_LENGTH);
-	if (err)
-		strncpy(part_str, "Unknown", IXGBE_PBANUM_LENGTH);
-	if (ixgbe_is_sfp(hw) && hw->phy.sfp_type != ixgbe_sfp_type_not_present)
-		e_dev_info("MAC: %d, PHY: %d, SFP+: %d, PBA No: %s\n",
-			   hw->mac.type, hw->phy.type, hw->phy.sfp_type,
-		           part_str);
-	else
-		e_dev_info("MAC: %d, PHY: %d, PBA No: %s\n",
-			   hw->mac.type, hw->phy.type, part_str);
-
 	/* calculate the expected PCIe bandwidth required for optimal
 	 * performance. Note that some older parts will never have enough
 	 * bandwidth due to being older generation PCIe parts. We clamp these
@@ -7790,6 +7767,19 @@ skip_sriov:
 	}
 	ixgbe_check_minimum_link(adapter, expected_gts);
 
+	err = ixgbe_read_pba_string_generic(hw, part_str, IXGBE_PBANUM_LENGTH);
+	if (err)
+		strncpy(part_str, "Unknown", IXGBE_PBANUM_LENGTH);
+	if (ixgbe_is_sfp(hw) && hw->phy.sfp_type != ixgbe_sfp_type_not_present)
+		e_dev_info("MAC: %d, PHY: %d, SFP+: %d, PBA No: %s\n",
+			   hw->mac.type, hw->phy.type, hw->phy.sfp_type,
+		           part_str);
+	else
+		e_dev_info("MAC: %d, PHY: %d, PBA No: %s\n",
+			   hw->mac.type, hw->phy.type, part_str);
+
+	e_dev_info("%pM\n", netdev->dev_addr);
+
 	/* reset the hardware with the new settings */
 	err = hw->mac.ops.start_hw(hw);
 	if (err == IXGBE_ERR_EEPROM_VERSION) {