From: David Schleef Date: Thu, 19 Feb 2009 17:46:36 +0000 (-0800) Subject: Staging: comedi: add ni_at_ao driver X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=6a9d800ffeda75d3e984386d0990ec1adaddaa20;p=linux-beck.git Staging: comedi: add ni_at_ao driver Driver for National Instruments AT-AO-6/10 cards From: David Schleef Cc: Ian Abbott Cc: Frank Mori Hess Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/ni_at_ao.c b/drivers/staging/comedi/drivers/ni_at_ao.c new file mode 100644 index 000000000000..beb15ed9da3a --- /dev/null +++ b/drivers/staging/comedi/drivers/ni_at_ao.c @@ -0,0 +1,451 @@ +/* + comedi/drivers/ni_at_ao.c + Driver for NI AT-AO-6/10 boards + + COMEDI - Linux Control and Measurement Device Interface + Copyright (C) 2000,2002 David A. Schleef + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ +/* +Driver: ni_at_ao +Description: National Instruments AT-AO-6/10 +Devices: [National Instruments] AT-AO-6 (at-ao-6), AT-AO-10 (at-ao-10) +Status: should work +Author: ds +Updated: Sun Dec 26 12:26:28 EST 2004 + +Configuration options: + [0] - I/O port base address + [1] - IRQ (unused) + [2] - DMA (unused) + [3] - analog output range, set by jumpers on hardware (0 for -10 to 10V bipolar, 1 for 0V to 10V unipolar) + +*/ +/* + * Register-level programming information can be found in NI + * document 320379.pdf. + */ + +#include "../comedidev.h" + +#include + +/* board egisters */ +/* registers with _2_ are accessed when GRP2WR is set in CFG1 */ + +#define ATAO_SIZE 0x20 + +#define ATAO_2_DMATCCLR 0x00 /* W 16 */ +#define ATAO_DIN 0x00 /* R 16 */ +#define ATAO_DOUT 0x00 /* W 16 */ + +#define ATAO_CFG2 0x02 /* W 16 */ +#define CALLD1 0x8000 +#define CALLD0 0x4000 +#define FFRTEN 0x2000 +#define DAC2S8 0x1000 +#define DAC2S6 0x0800 +#define DAC2S4 0x0400 +#define DAC2S2 0x0200 +#define DAC2S0 0x0100 +#define LDAC8 0x0080 +#define LDAC6 0x0040 +#define LDAC4 0x0020 +#define LDAC2 0x0010 +#define LDAC0 0x0008 +#define PROMEN 0x0004 +#define SCLK 0x0002 +#define SDATA 0x0001 + +#define ATAO_2_INT1CLR 0x02 /* W 16 */ + +#define ATAO_CFG3 0x04 /* W 16 */ +#define DMAMODE 0x0040 +#define CLKOUT 0x0020 +#define RCLKEN 0x0010 +#define DOUTEN2 0x0008 +#define DOUTEN1 0x0004 +#define EN2_5V 0x0002 +#define SCANEN 0x0001 + +#define ATAO_2_INT2CLR 0x04 /* W 16 */ + +#define ATAO_82C53_BASE 0x06 /* RW 8 */ + +#define ATAO_82C53_CNTR1 0x06 /* RW 8 */ +#define ATAO_82C53_CNTR2 0x07 /* RW 8 */ +#define ATAO_82C53_CNTR3 0x08 /* RW 8 */ +#define ATAO_82C53_CNTRCMD 0x09 /* W 8 */ +#define CNTRSEL1 0x80 +#define CNTRSEL0 0x40 +#define RWSEL1 0x20 +#define RWSEL0 0x10 +#define MODESEL2 0x08 +#define MODESEL1 0x04 +#define MODESEL0 0x02 +#define BCDSEL 0x01 + /* read-back command */ +#define COUNT 0x20 +#define STATUS 0x10 +#define CNTR3 0x08 +#define CNTR2 0x04 +#define CNTR1 0x02 + /* status */ +#define OUT 0x80 +#define _NULL 0x40 +#define RW1 0x20 +#define RW0 0x10 +#define MODE2 0x08 +#define MODE1 0x04 +#define MODE0 0x02 +#define BCD 0x01 + +#define ATAO_2_RTSISHFT 0x06 /* W 8 */ +#define RSI 0x01 + +#define ATAO_2_RTSISTRB 0x07 /* W 8 */ + +#define ATAO_CFG1 0x0a /* W 16 */ +#define EXTINT2EN 0x8000 +#define EXTINT1EN 0x4000 +#define CNTINT2EN 0x2000 +#define CNTINT1EN 0x1000 +#define TCINTEN 0x0800 +#define CNT1SRC 0x0400 +#define CNT2SRC 0x0200 +#define FIFOEN 0x0100 +#define GRP2WR 0x0080 +#define EXTUPDEN 0x0040 +#define DMARQ 0x0020 +#define DMAEN 0x0010 +#define CH_mask 0x000f +#define ATAO_STATUS 0x0a /* R 16 */ +#define FH 0x0040 +#define FE 0x0020 +#define FF 0x0010 +#define INT2 0x0008 +#define INT1 0x0004 +#define TCINT 0x0002 +#define PROMOUT 0x0001 + +#define ATAO_FIFO_WRITE 0x0c /* W 16 */ +#define ATAO_FIFO_CLEAR 0x0c /* R 16 */ +#define ATAO_DACn(x) (0x0c + 2*(x)) /* W */ + +/* + * Board descriptions for two imaginary boards. Describing the + * boards in this way is optional, and completely driver-dependent. + * Some drivers use arrays such as this, other do not. + */ +typedef struct atao_board_struct { + const char *name; + int n_ao_chans; +} atao_board; +static const atao_board atao_boards[] = { + { + name: "ai-ao-6", + n_ao_chans:6, + }, + { + name: "ai-ao-10", + n_ao_chans:10, + }, +}; + +#define thisboard ((atao_board *)dev->board_ptr) + +typedef struct { + unsigned short cfg1; + unsigned short cfg2; + unsigned short cfg3; + + /* Used for AO readback */ + lsampl_t ao_readback[10]; +} atao_private; +#define devpriv ((atao_private *)dev->private) + +static int atao_attach(comedi_device * dev, comedi_devconfig * it); +static int atao_detach(comedi_device * dev); +static comedi_driver driver_atao = { + driver_name:"ni_at_ao", + module:THIS_MODULE, + attach:atao_attach, + detach:atao_detach, + board_name:&atao_boards[0].name, + offset:sizeof(atao_board), + num_names:sizeof(atao_boards) / sizeof(atao_board), +}; + +COMEDI_INITCLEANUP(driver_atao); + +static void atao_reset(comedi_device * dev); + +static int atao_ao_winsn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int atao_ao_rinsn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int atao_dio_insn_bits(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int atao_dio_insn_config(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int atao_calib_insn_read(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int atao_calib_insn_write(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +static int atao_attach(comedi_device * dev, comedi_devconfig * it) +{ + comedi_subdevice *s; + unsigned long iobase; + int ao_unipolar; + + iobase = it->options[0]; + if (iobase == 0) + iobase = 0x1c0; + ao_unipolar = it->options[3]; + + printk("comedi%d: ni_at_ao: 0x%04lx", dev->minor, iobase); + + if (!request_region(iobase, ATAO_SIZE, "ni_at_ao")) { + printk(" I/O port conflict\n"); + return -EIO; + } + dev->iobase = iobase; + + //dev->board_ptr = atao_probe(dev); + + dev->board_name = thisboard->name; + + if (alloc_private(dev, sizeof(atao_private)) < 0) + return -ENOMEM; + + if (alloc_subdevices(dev, 4) < 0) + return -ENOMEM; + + s = dev->subdevices + 0; + /* analog output subdevice */ + s->type = COMEDI_SUBD_AO; + s->subdev_flags = SDF_WRITABLE; + s->n_chan = thisboard->n_ao_chans; + s->maxdata = (1 << 12) - 1; + if (ao_unipolar) + s->range_table = &range_unipolar10; + else + s->range_table = &range_bipolar10; + s->insn_write = &atao_ao_winsn; + s->insn_read = &atao_ao_rinsn; + + s = dev->subdevices + 1; + /* digital i/o subdevice */ + s->type = COMEDI_SUBD_DIO; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE; + s->n_chan = 8; + s->maxdata = 1; + s->range_table = &range_digital; + s->insn_bits = atao_dio_insn_bits; + s->insn_config = atao_dio_insn_config; + + s = dev->subdevices + 2; + /* caldac subdevice */ + s->type = COMEDI_SUBD_CALIB; + s->subdev_flags = SDF_WRITABLE | SDF_INTERNAL; + s->n_chan = 21; + s->maxdata = 0xff; + s->insn_read = atao_calib_insn_read; + s->insn_write = atao_calib_insn_write; + + s = dev->subdevices + 3; + /* eeprom subdevice */ + //s->type=COMEDI_SUBD_EEPROM; + s->type = COMEDI_SUBD_UNUSED; + + atao_reset(dev); + + printk("\n"); + + return 0; +} + +static int atao_detach(comedi_device * dev) +{ + printk("comedi%d: atao: remove\n", dev->minor); + + if (dev->iobase) + release_region(dev->iobase, ATAO_SIZE); + + return 0; +} + +static void atao_reset(comedi_device * dev) +{ + /* This is the reset sequence described in the manual */ + + devpriv->cfg1 = 0; + outw(devpriv->cfg1, dev->iobase + ATAO_CFG1); + + outb(RWSEL0 | MODESEL2, dev->iobase + ATAO_82C53_CNTRCMD); + outb(0x03, dev->iobase + ATAO_82C53_CNTR1); + outb(CNTRSEL0 | RWSEL0 | MODESEL2, dev->iobase + ATAO_82C53_CNTRCMD); + + devpriv->cfg2 = 0; + outw(devpriv->cfg2, dev->iobase + ATAO_CFG2); + + devpriv->cfg3 = 0; + outw(devpriv->cfg3, dev->iobase + ATAO_CFG3); + + inw(dev->iobase + ATAO_FIFO_CLEAR); + + devpriv->cfg1 |= GRP2WR; + outw(devpriv->cfg1, dev->iobase + ATAO_CFG1); + + outw(0, dev->iobase + ATAO_2_INT1CLR); + outw(0, dev->iobase + ATAO_2_INT2CLR); + outw(0, dev->iobase + ATAO_2_DMATCCLR); + + devpriv->cfg1 &= ~GRP2WR; + outw(devpriv->cfg1, dev->iobase + ATAO_CFG1); +} + +static int atao_ao_winsn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + int i; + int chan = CR_CHAN(insn->chanspec); + short bits; + + for (i = 0; i < insn->n; i++) { + bits = data[i] - 0x800; + if (chan == 0) { + devpriv->cfg1 |= GRP2WR; + outw(devpriv->cfg1, dev->iobase + ATAO_CFG1); + } + outw(bits, dev->iobase + ATAO_DACn(chan)); + if (chan == 0) { + devpriv->cfg1 &= ~GRP2WR; + outw(devpriv->cfg1, dev->iobase + ATAO_CFG1); + } + devpriv->ao_readback[chan] = data[i]; + } + + return i; +} + +static int atao_ao_rinsn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + int i; + int chan = CR_CHAN(insn->chanspec); + + for (i = 0; i < insn->n; i++) + data[i] = devpriv->ao_readback[chan]; + + return i; +} + +static int atao_dio_insn_bits(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + if (insn->n != 2) + return -EINVAL; + + if (data[0]) { + s->state &= ~data[0]; + s->state |= data[0] & data[1]; + outw(s->state, dev->iobase + ATAO_DOUT); + } + + data[1] = inw(dev->iobase + ATAO_DIN); + + return 2; +} + +static int atao_dio_insn_config(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + int chan = CR_CHAN(insn->chanspec); + unsigned int mask, bit; + + /* The input or output configuration of each digital line is + * configured by a special insn_config instruction. chanspec + * contains the channel to be changed, and data[0] contains the + * value COMEDI_INPUT or COMEDI_OUTPUT. */ + + mask = (chan < 4) ? 0x0f : 0xf0; + bit = (chan < 4) ? DOUTEN1 : DOUTEN2; + + switch (data[0]) { + case INSN_CONFIG_DIO_OUTPUT: + s->io_bits |= mask; + devpriv->cfg3 |= bit; + break; + case INSN_CONFIG_DIO_INPUT: + s->io_bits &= ~mask; + devpriv->cfg3 &= ~bit; + break; + case INSN_CONFIG_DIO_QUERY: + data[1] = + (s-> + io_bits & (1 << chan)) ? COMEDI_OUTPUT : COMEDI_INPUT; + return insn->n; + break; + default: + return -EINVAL; + break; + } + + outw(devpriv->cfg3, dev->iobase + ATAO_CFG3); + + return 1; +} + +/* + * Figure 2-1 in the manual shows 3 chips labeled DAC8800, which + * are 8-channel 8-bit DACs. These are most likely the calibration + * DACs. It is not explicitly stated in the manual how to access + * the caldacs, but we can guess. + */ +static int atao_calib_insn_read(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + int i; + for (i = 0; i < insn->n; i++) { + data[i] = 0; /* XXX */ + } + return insn->n; +} + +static int atao_calib_insn_write(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + unsigned int bitstring, bit; + unsigned int chan = CR_CHAN(insn->chanspec); + + bitstring = ((chan & 0x7) << 8) | (data[insn->n - 1] & 0xff); + + for (bit = 1 << (11 - 1); bit; bit >>= 1) { + outw(devpriv->cfg2 | ((bit & bitstring) ? SDATA : 0), + dev->iobase + ATAO_CFG2); + outw(devpriv->cfg2 | SCLK | ((bit & bitstring) ? SDATA : 0), + dev->iobase + ATAO_CFG2); + } + /* strobe the appropriate caldac */ + outw(devpriv->cfg2 | (((chan >> 3) + 1) << 14), + dev->iobase + ATAO_CFG2); + outw(devpriv->cfg2, dev->iobase + ATAO_CFG2); + + return insn->n; +}