From: Sascha Hauer Date: Fri, 25 Feb 2011 17:54:51 +0000 (+0100) Subject: i2c-mxs: set controller to pio queue mode after reset X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=6b7d815c3f37f22c355b00362bc7c7d0bac9baea;p=linux-beck.git i2c-mxs: set controller to pio queue mode after reset mxs_reset_block() clears the PIO_QUEUE_MODE bit. So we have to set it again after a controller reset. Signed-off-by: Sascha Hauer Signed-off-by: Wolfram Sang Cc: Ben Dooks Signed-off-by: Ben Dooks --- diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 8022e2390a5a..caf96dc8ca1b 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -118,6 +118,8 @@ static void mxs_i2c_reset(struct mxs_i2c_dev *i2c) { mxs_reset_block(i2c->regs); writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET); + writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE, + i2c->regs + MXS_I2C_QUEUECTRL_SET); } static void mxs_i2c_pioq_setup_read(struct mxs_i2c_dev *i2c, u8 addr, int len, @@ -347,8 +349,6 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev) /* Do reset to enforce correct startup after pinmuxing */ mxs_i2c_reset(i2c); - writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE, - i2c->regs + MXS_I2C_QUEUECTRL_SET); adap = &i2c->adapter; strlcpy(adap->name, "MXS I2C adapter", sizeof(adap->name));