From: Koji Matsuoka Date: Tue, 28 Jul 2015 11:12:43 +0000 (+0900) Subject: drm: rcar-du: lvds: Add R-Car Gen3 support X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=6bc2e15cf21cd96eba69ac83ddd37a7994148b16;p=linux-beck.git drm: rcar-du: lvds: Add R-Car Gen3 support The LVDS encoder differs slightly in Gen3 SoCs in its PLL configuration. Add support for the Gen3 LVDS PLL parameters and startup procedure. Signed-off-by: Koji Matsuoka Signed-off-by: Laurent Pinchart --- diff --git a/drivers/gpu/drm/rcar-du/Kconfig b/drivers/gpu/drm/rcar-du/Kconfig index 2171a6f5a573..1f10fa0928b4 100644 --- a/drivers/gpu/drm/rcar-du/Kconfig +++ b/drivers/gpu/drm/rcar-du/Kconfig @@ -21,10 +21,8 @@ config DRM_RCAR_HDMI config DRM_RCAR_LVDS bool "R-Car DU LVDS Encoder Support" depends on DRM_RCAR_DU - depends on ARCH_R8A7790 || ARCH_R8A7791 || COMPILE_TEST help - Enable support for the R-Car Display Unit embedded LVDS encoders - (currently only on R8A7790 and R8A7791). + Enable support for the R-Car Display Unit embedded LVDS encoders. config DRM_RCAR_VSP bool "R-Car DU VSP Compositor Support" diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c index 24265d75e7de..ed6006bf6bd8 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c @@ -140,15 +140,21 @@ static const struct rcar_du_device_info rcar_du_r8a7795_info = { | RCAR_DU_FEATURE_VSP1_SOURCE, .num_crtcs = 4, .routes = { - /* R8A7795 has one RGB output, and two HDMI and one LVDS - * (currently unsupported) outputs + /* R8A7795 has one RGB output, one LVDS output and two + * (currently unsupported) HDMI outputs. */ [RCAR_DU_OUTPUT_DPAD0] = { .possible_crtcs = BIT(3), .encoder_type = DRM_MODE_ENCODER_NONE, .port = 0, }, + [RCAR_DU_OUTPUT_LVDS0] = { + .possible_crtcs = BIT(0), + .encoder_type = DRM_MODE_ENCODER_LVDS, + .port = 3, + }, }, + .num_lvds = 1, }; static const struct of_device_id rcar_du_of_table[] = { diff --git a/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c b/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c index 02acebadf7d6..ef3a50321ecc 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c @@ -38,22 +38,13 @@ static void rcar_lvds_write(struct rcar_du_lvdsenc *lvds, u32 reg, u32 data) iowrite32(data, lvds->mmio + reg); } -static int rcar_du_lvdsenc_start(struct rcar_du_lvdsenc *lvds, - struct rcar_du_crtc *rcrtc) +static void rcar_du_lvdsenc_start_gen2(struct rcar_du_lvdsenc *lvds, + struct rcar_du_crtc *rcrtc) { const struct drm_display_mode *mode = &rcrtc->crtc.mode; unsigned int freq = mode->clock; u32 lvdcr0; - u32 lvdhcr; u32 pllcr; - int ret; - - if (lvds->enabled) - return 0; - - ret = clk_prepare_enable(lvds->clock); - if (ret < 0) - return ret; /* PLL clock configuration */ if (freq < 39000) @@ -67,26 +58,6 @@ static int rcar_du_lvdsenc_start(struct rcar_du_lvdsenc *lvds, rcar_lvds_write(lvds, LVDPLLCR, pllcr); - /* Hardcode the channels and control signals routing for now. - * - * HSYNC -> CTRL0 - * VSYNC -> CTRL1 - * DISP -> CTRL2 - * 0 -> CTRL3 - */ - rcar_lvds_write(lvds, LVDCTRCR, LVDCTRCR_CTR3SEL_ZERO | - LVDCTRCR_CTR2SEL_DISP | LVDCTRCR_CTR1SEL_VSYNC | - LVDCTRCR_CTR0SEL_HSYNC); - - if (rcar_du_needs(lvds->dev, RCAR_DU_QUIRK_LVDS_LANES)) - lvdhcr = LVDCHCR_CHSEL_CH(0, 0) | LVDCHCR_CHSEL_CH(1, 3) - | LVDCHCR_CHSEL_CH(2, 2) | LVDCHCR_CHSEL_CH(3, 1); - else - lvdhcr = LVDCHCR_CHSEL_CH(0, 0) | LVDCHCR_CHSEL_CH(1, 1) - | LVDCHCR_CHSEL_CH(2, 2) | LVDCHCR_CHSEL_CH(3, 3); - - rcar_lvds_write(lvds, LVDCHCR, lvdhcr); - /* Select the input, hardcode mode 0, enable LVDS operation and turn * bias circuitry on. */ @@ -96,8 +67,10 @@ static int rcar_du_lvdsenc_start(struct rcar_du_lvdsenc *lvds, rcar_lvds_write(lvds, LVDCR0, lvdcr0); /* Turn all the channels on. */ - rcar_lvds_write(lvds, LVDCR1, LVDCR1_CHSTBY(3) | LVDCR1_CHSTBY(2) | - LVDCR1_CHSTBY(1) | LVDCR1_CHSTBY(0) | LVDCR1_CLKSTBY); + rcar_lvds_write(lvds, LVDCR1, + LVDCR1_CHSTBY_GEN2(3) | LVDCR1_CHSTBY_GEN2(2) | + LVDCR1_CHSTBY_GEN2(1) | LVDCR1_CHSTBY_GEN2(0) | + LVDCR1_CLKSTBY_GEN2); /* Turn the PLL on, wait for the startup delay, and turn the output * on. @@ -109,8 +82,90 @@ static int rcar_du_lvdsenc_start(struct rcar_du_lvdsenc *lvds, lvdcr0 |= LVDCR0_LVRES; rcar_lvds_write(lvds, LVDCR0, lvdcr0); +} + +static void rcar_du_lvdsenc_start_gen3(struct rcar_du_lvdsenc *lvds, + struct rcar_du_crtc *rcrtc) +{ + const struct drm_display_mode *mode = &rcrtc->crtc.mode; + unsigned int freq = mode->clock; + u32 lvdcr0; + u32 pllcr; + + /* PLL clock configuration */ + if (freq < 42000) + pllcr = LVDPLLCR_PLLDIVCNT_42M; + else if (freq < 85000) + pllcr = LVDPLLCR_PLLDIVCNT_85M; + else if (freq < 128000) + pllcr = LVDPLLCR_PLLDIVCNT_128M; + else + pllcr = LVDPLLCR_PLLDIVCNT_148M; + + rcar_lvds_write(lvds, LVDPLLCR, pllcr); + + /* Turn the PLL on, set it to LVDS normal mode, wait for the startup + * delay and turn the output on. + */ + lvdcr0 = LVDCR0_PLLON; + rcar_lvds_write(lvds, LVDCR0, lvdcr0); + + lvdcr0 |= LVDCR0_PWD; + rcar_lvds_write(lvds, LVDCR0, lvdcr0); + + usleep_range(100, 150); + + lvdcr0 |= LVDCR0_LVRES; + rcar_lvds_write(lvds, LVDCR0, lvdcr0); + + /* Turn all the channels on. */ + rcar_lvds_write(lvds, LVDCR1, + LVDCR1_CHSTBY_GEN3(3) | LVDCR1_CHSTBY_GEN3(2) | + LVDCR1_CHSTBY_GEN3(1) | LVDCR1_CHSTBY_GEN3(0) | + LVDCR1_CLKSTBY_GEN3); +} + +static int rcar_du_lvdsenc_start(struct rcar_du_lvdsenc *lvds, + struct rcar_du_crtc *rcrtc) +{ + u32 lvdhcr; + int ret; + + if (lvds->enabled) + return 0; + + ret = clk_prepare_enable(lvds->clock); + if (ret < 0) + return ret; + + /* Hardcode the channels and control signals routing for now. + * + * HSYNC -> CTRL0 + * VSYNC -> CTRL1 + * DISP -> CTRL2 + * 0 -> CTRL3 + */ + rcar_lvds_write(lvds, LVDCTRCR, LVDCTRCR_CTR3SEL_ZERO | + LVDCTRCR_CTR2SEL_DISP | LVDCTRCR_CTR1SEL_VSYNC | + LVDCTRCR_CTR0SEL_HSYNC); + + if (rcar_du_needs(lvds->dev, RCAR_DU_QUIRK_LVDS_LANES)) + lvdhcr = LVDCHCR_CHSEL_CH(0, 0) | LVDCHCR_CHSEL_CH(1, 3) + | LVDCHCR_CHSEL_CH(2, 2) | LVDCHCR_CHSEL_CH(3, 1); + else + lvdhcr = LVDCHCR_CHSEL_CH(0, 0) | LVDCHCR_CHSEL_CH(1, 1) + | LVDCHCR_CHSEL_CH(2, 2) | LVDCHCR_CHSEL_CH(3, 3); + + rcar_lvds_write(lvds, LVDCHCR, lvdhcr); + + /* Perform generation-specific initialization. */ + if (lvds->dev->info->gen < 3) + rcar_du_lvdsenc_start_gen2(lvds, rcrtc); + else + rcar_du_lvdsenc_start_gen3(lvds, rcrtc); lvds->enabled = true; + return 0; } @@ -143,10 +198,16 @@ int rcar_du_lvdsenc_enable(struct rcar_du_lvdsenc *lvds, struct drm_crtc *crtc, void rcar_du_lvdsenc_atomic_check(struct rcar_du_lvdsenc *lvds, struct drm_display_mode *mode) { - /* The internal LVDS encoder has a clock frequency operating range of - * 30MHz to 150MHz. Clamp the clock accordingly. + struct rcar_du_device *rcdu = lvds->dev; + + /* The internal LVDS encoder has a restricted clock frequency operating + * range (30MHz to 150MHz on Gen2, 25.175MHz to 148.5MHz on Gen3). Clamp + * the clock accordingly. */ - mode->clock = clamp(mode->clock, 30000, 150000); + if (rcdu->info->gen < 3) + mode->clock = clamp(mode->clock, 30000, 150000); + else + mode->clock = clamp(mode->clock, 25175, 148500); } static int rcar_du_lvdsenc_get_resources(struct rcar_du_lvdsenc *lvds, diff --git a/drivers/gpu/drm/rcar-du/rcar_lvds_regs.h b/drivers/gpu/drm/rcar-du/rcar_lvds_regs.h index b1eafd097a79..d7d294ba2dbe 100644 --- a/drivers/gpu/drm/rcar-du/rcar_lvds_regs.h +++ b/drivers/gpu/drm/rcar-du/rcar_lvds_regs.h @@ -1,7 +1,7 @@ /* * rcar_lvds_regs.h -- R-Car LVDS Interface Registers Definitions * - * Copyright (C) 2013 Renesas Electronics Corporation + * Copyright (C) 2013-2015 Renesas Electronics Corporation * * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) * @@ -15,28 +15,38 @@ #define LVDCR0 0x0000 #define LVDCR0_DUSEL (1 << 15) -#define LVDCR0_DMD (1 << 12) +#define LVDCR0_DMD (1 << 12) /* Gen2 only */ #define LVDCR0_LVMD_MASK (0xf << 8) #define LVDCR0_LVMD_SHIFT 8 #define LVDCR0_PLLON (1 << 4) -#define LVDCR0_BEN (1 << 2) -#define LVDCR0_LVEN (1 << 1) +#define LVDCR0_PWD (1 << 2) /* Gen3 only */ +#define LVDCR0_BEN (1 << 2) /* Gen2 only */ +#define LVDCR0_LVEN (1 << 1) /* Gen2 only */ #define LVDCR0_LVRES (1 << 0) #define LVDCR1 0x0004 -#define LVDCR1_CKSEL (1 << 15) -#define LVDCR1_CHSTBY(n) (3 << (2 + (n) * 2)) -#define LVDCR1_CLKSTBY (3 << 0) +#define LVDCR1_CKSEL (1 << 15) /* Gen2 only */ +#define LVDCR1_CHSTBY_GEN2(n) (3 << (2 + (n) * 2)) /* Gen2 only */ +#define LVDCR1_CHSTBY_GEN3(n) (1 << (2 + (n) * 2)) /* Gen3 only */ +#define LVDCR1_CLKSTBY_GEN2 (3 << 0) /* Gen2 only */ +#define LVDCR1_CLKSTBY_GEN3 (1 << 0) /* Gen3 only */ #define LVDPLLCR 0x0008 #define LVDPLLCR_CEEN (1 << 14) #define LVDPLLCR_FBEN (1 << 13) #define LVDPLLCR_COSEL (1 << 12) +/* Gen2 */ #define LVDPLLCR_PLLDLYCNT_150M (0x1bf << 0) #define LVDPLLCR_PLLDLYCNT_121M (0x22c << 0) #define LVDPLLCR_PLLDLYCNT_60M (0x77b << 0) #define LVDPLLCR_PLLDLYCNT_38M (0x69a << 0) #define LVDPLLCR_PLLDLYCNT_MASK (0x7ff << 0) +/* Gen3 */ +#define LVDPLLCR_PLLDIVCNT_42M (0x014cb << 0) +#define LVDPLLCR_PLLDIVCNT_85M (0x00a45 << 0) +#define LVDPLLCR_PLLDIVCNT_128M (0x006c3 << 0) +#define LVDPLLCR_PLLDIVCNT_148M (0x046c1 << 0) +#define LVDPLLCR_PLLDIVCNT_MASK (0x7ffff << 0) #define LVDCTRCR 0x000c #define LVDCTRCR_CTR3SEL_ZERO (0 << 12)