From: Anton Vorontsov Date: Sun, 11 Jan 2009 15:30:13 +0000 (+0300) Subject: powerpc/83xx: Make serial ports work on MPC8315E-RDB w/ FSL U-Boots X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=6c9789de2a02755101f757789ffcb17312f3fa9b;p=linux-beck.git powerpc/83xx: Make serial ports work on MPC8315E-RDB w/ FSL U-Boots FSL U-Boots use /soc8315@e0000000 node to search and fixup serial nodes' clock-frequency properties. Though in upstream kernels we use new naming convention -- for IMMR address space dts files specify /immr@e0000000 nodes. This makes FSL U-Boots fail to fixup the clock frequencies, and that leads to serial ports misbehaviour. We can workaround the issue by filling the clock frequency values manually. p.s. For the same reason FSL U-Boots fail to fixup MAC addresses for ethernet nodes, so users should either change the .dts file locally or set MAC address via `ifconfig hw ether' command. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts index 072c9b0f8c8e..71784165b77e 100644 --- a/arch/powerpc/boot/dts/mpc8315erdb.dts +++ b/arch/powerpc/boot/dts/mpc8315erdb.dts @@ -255,7 +255,7 @@ device_type = "serial"; compatible = "ns16550"; reg = <0x4500 0x100>; - clock-frequency = <0>; + clock-frequency = <133333333>; interrupts = <9 0x8>; interrupt-parent = <&ipic>; }; @@ -265,7 +265,7 @@ device_type = "serial"; compatible = "ns16550"; reg = <0x4600 0x100>; - clock-frequency = <0>; + clock-frequency = <133333333>; interrupts = <10 0x8>; interrupt-parent = <&ipic>; };