From: Claudiu Manoil Date: Wed, 30 Apr 2014 11:27:21 +0000 (+0300) Subject: gianfar: Avoid unnecessary reg accesses in adjust_link() X-Git-Tag: next-20140502~110^2~1 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=6ce29b0e2a04;p=karo-tx-linux.git gianfar: Avoid unnecessary reg accesses in adjust_link() For phy devices that don't issue interrupts upon link state changes, phylib polls the link state resulting in repeated calls to adjust_link(), even if the link state didn't change. As a result, some mac registers are repeatedly read and written with the same values, which is not ok. To fix this, adjust_link() has been refactored to check first whether the link state has changed and to take action only if needed, updating mac registers and local state variables. The 'new_state' local flag, set if one of the link params changed (link, speed or duplex), has been rendered useless and removed by this refactoring. Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 9125d9abf099..e2d42475b006 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -121,6 +121,7 @@ static irqreturn_t gfar_error(int irq, void *dev_id); static irqreturn_t gfar_transmit(int irq, void *dev_id); static irqreturn_t gfar_interrupt(int irq, void *dev_id); static void adjust_link(struct net_device *dev); +static noinline void gfar_update_link_state(struct gfar_private *priv); static int init_phy(struct net_device *dev); static int gfar_probe(struct platform_device *ofdev); static int gfar_remove(struct platform_device *ofdev); @@ -3076,41 +3077,6 @@ static irqreturn_t gfar_interrupt(int irq, void *grp_id) return IRQ_HANDLED; } -static u32 gfar_get_flowctrl_cfg(struct gfar_private *priv) -{ - struct phy_device *phydev = priv->phydev; - u32 val = 0; - - if (!phydev->duplex) - return val; - - if (!priv->pause_aneg_en) { - if (priv->tx_pause_en) - val |= MACCFG1_TX_FLOW; - if (priv->rx_pause_en) - val |= MACCFG1_RX_FLOW; - } else { - u16 lcl_adv, rmt_adv; - u8 flowctrl; - /* get link partner capabilities */ - rmt_adv = 0; - if (phydev->pause) - rmt_adv = LPA_PAUSE_CAP; - if (phydev->asym_pause) - rmt_adv |= LPA_PAUSE_ASYM; - - lcl_adv = mii_advertise_flowctrl(phydev->advertising); - - flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv); - if (flowctrl & FLOW_CTRL_TX) - val |= MACCFG1_TX_FLOW; - if (flowctrl & FLOW_CTRL_RX) - val |= MACCFG1_RX_FLOW; - } - - return val; -} - /* Called every time the controller might need to be made * aware of new link state. The PHY code conveys this * information through variables in the phydev structure, and this @@ -3120,83 +3086,12 @@ static u32 gfar_get_flowctrl_cfg(struct gfar_private *priv) static void adjust_link(struct net_device *dev) { struct gfar_private *priv = netdev_priv(dev); - struct gfar __iomem *regs = priv->gfargrp[0].regs; struct phy_device *phydev = priv->phydev; - int new_state = 0; - if (test_bit(GFAR_RESETTING, &priv->state)) - return; - - if (phydev->link) { - u32 tempval1 = gfar_read(®s->maccfg1); - u32 tempval = gfar_read(®s->maccfg2); - u32 ecntrl = gfar_read(®s->ecntrl); - - /* Now we make sure that we can be in full duplex mode. - * If not, we operate in half-duplex mode. - */ - if (phydev->duplex != priv->oldduplex) { - new_state = 1; - if (!(phydev->duplex)) - tempval &= ~(MACCFG2_FULL_DUPLEX); - else - tempval |= MACCFG2_FULL_DUPLEX; - - priv->oldduplex = phydev->duplex; - } - - if (phydev->speed != priv->oldspeed) { - new_state = 1; - switch (phydev->speed) { - case 1000: - tempval = - ((tempval & ~(MACCFG2_IF)) | MACCFG2_GMII); - - ecntrl &= ~(ECNTRL_R100); - break; - case 100: - case 10: - tempval = - ((tempval & ~(MACCFG2_IF)) | MACCFG2_MII); - - /* Reduced mode distinguishes - * between 10 and 100 - */ - if (phydev->speed == SPEED_100) - ecntrl |= ECNTRL_R100; - else - ecntrl &= ~(ECNTRL_R100); - break; - default: - netif_warn(priv, link, dev, - "Ack! Speed (%d) is not 10/100/1000!\n", - phydev->speed); - break; - } - - priv->oldspeed = phydev->speed; - } - - tempval1 &= ~(MACCFG1_TX_FLOW | MACCFG1_RX_FLOW); - tempval1 |= gfar_get_flowctrl_cfg(priv); - - gfar_write(®s->maccfg1, tempval1); - gfar_write(®s->maccfg2, tempval); - gfar_write(®s->ecntrl, ecntrl); - - if (!priv->oldlink) { - new_state = 1; - priv->oldlink = 1; - } - } else if (priv->oldlink) { - new_state = 1; - priv->oldlink = 0; - priv->oldspeed = 0; - priv->oldduplex = -1; - } - - if (new_state && netif_msg_link(priv)) - phy_print_status(phydev); + if (unlikely(phydev->link != priv->oldlink || + phydev->duplex != priv->oldduplex || + phydev->speed != priv->oldspeed)) + gfar_update_link_state(priv); } /* Update the hash table based on the current list of multicast @@ -3442,6 +3337,114 @@ static irqreturn_t gfar_error(int irq, void *grp_id) return IRQ_HANDLED; } +static u32 gfar_get_flowctrl_cfg(struct gfar_private *priv) +{ + struct phy_device *phydev = priv->phydev; + u32 val = 0; + + if (!phydev->duplex) + return val; + + if (!priv->pause_aneg_en) { + if (priv->tx_pause_en) + val |= MACCFG1_TX_FLOW; + if (priv->rx_pause_en) + val |= MACCFG1_RX_FLOW; + } else { + u16 lcl_adv, rmt_adv; + u8 flowctrl; + /* get link partner capabilities */ + rmt_adv = 0; + if (phydev->pause) + rmt_adv = LPA_PAUSE_CAP; + if (phydev->asym_pause) + rmt_adv |= LPA_PAUSE_ASYM; + + lcl_adv = mii_advertise_flowctrl(phydev->advertising); + + flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv); + if (flowctrl & FLOW_CTRL_TX) + val |= MACCFG1_TX_FLOW; + if (flowctrl & FLOW_CTRL_RX) + val |= MACCFG1_RX_FLOW; + } + + return val; +} + +static noinline void gfar_update_link_state(struct gfar_private *priv) +{ + struct gfar __iomem *regs = priv->gfargrp[0].regs; + struct phy_device *phydev = priv->phydev; + + if (unlikely(test_bit(GFAR_RESETTING, &priv->state))) + return; + + if (phydev->link) { + u32 tempval1 = gfar_read(®s->maccfg1); + u32 tempval = gfar_read(®s->maccfg2); + u32 ecntrl = gfar_read(®s->ecntrl); + + if (phydev->duplex != priv->oldduplex) { + if (!(phydev->duplex)) + tempval &= ~(MACCFG2_FULL_DUPLEX); + else + tempval |= MACCFG2_FULL_DUPLEX; + + priv->oldduplex = phydev->duplex; + } + + if (phydev->speed != priv->oldspeed) { + switch (phydev->speed) { + case 1000: + tempval = + ((tempval & ~(MACCFG2_IF)) | MACCFG2_GMII); + + ecntrl &= ~(ECNTRL_R100); + break; + case 100: + case 10: + tempval = + ((tempval & ~(MACCFG2_IF)) | MACCFG2_MII); + + /* Reduced mode distinguishes + * between 10 and 100 + */ + if (phydev->speed == SPEED_100) + ecntrl |= ECNTRL_R100; + else + ecntrl &= ~(ECNTRL_R100); + break; + default: + netif_warn(priv, link, priv->ndev, + "Ack! Speed (%d) is not 10/100/1000!\n", + phydev->speed); + break; + } + + priv->oldspeed = phydev->speed; + } + + tempval1 &= ~(MACCFG1_TX_FLOW | MACCFG1_RX_FLOW); + tempval1 |= gfar_get_flowctrl_cfg(priv); + + gfar_write(®s->maccfg1, tempval1); + gfar_write(®s->maccfg2, tempval); + gfar_write(®s->ecntrl, ecntrl); + + if (!priv->oldlink) + priv->oldlink = 1; + + } else if (priv->oldlink) { + priv->oldlink = 0; + priv->oldspeed = 0; + priv->oldduplex = -1; + } + + if (netif_msg_link(priv)) + phy_print_status(phydev); +} + static struct of_device_id gfar_match[] = { {