From: Peter Ujfalusi Date: Fri, 16 May 2014 12:17:15 +0000 (+0300) Subject: ARM: edma: Get IP configuration from HW (number of channels, tc, etc) X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=6d10c3950bf4d42a5bd28bfd7572834225acb031;p=linux-beck.git ARM: edma: Get IP configuration from HW (number of channels, tc, etc) From CCCFG register of eDMA3 we can get all the needed information for the driver about the IP: Number of channels: NUM_DMACH Number of regions: NUM_REGN Number of slots (PaRAM sets): NUM_PAENTRY Number of TC/EQ: NUM_EVQUE In case when booted with DT or the queue_priority_mapping is not provided set up a default priority map. Signed-off-by: Peter Ujfalusi Acked-by: Joel Fernandes Signed-off-by: Sekhar Nori --- diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c index 79097d880d50..eeea011480eb 100644 --- a/arch/arm/common/edma.c +++ b/arch/arm/common/edma.c @@ -102,7 +102,13 @@ #define PARM_OFFSET(param_no) (EDMA_PARM + ((param_no) << 5)) #define EDMA_DCHMAP 0x0100 /* 64 registers */ -#define CHMAP_EXIST BIT(24) + +/* CCCFG register */ +#define GET_NUM_DMACH(x) (x & 0x7) /* bits 0-2 */ +#define GET_NUM_PAENTRY(x) ((x & 0x7000) >> 12) /* bits 12-14 */ +#define GET_NUM_EVQUE(x) ((x & 0x70000) >> 16) /* bits 16-18 */ +#define GET_NUM_REGN(x) ((x & 0x300000) >> 20) /* bits 20-21 */ +#define CHMAP_EXIST BIT(24) #define EDMA_MAX_DMACH 64 #define EDMA_MAX_PARAMENTRY 512 @@ -1408,6 +1414,67 @@ void edma_clear_event(unsigned channel) } EXPORT_SYMBOL(edma_clear_event); +static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata, + struct edma *edma_cc) +{ + int i; + u32 value, cccfg; + s8 (*queue_priority_map)[2]; + + /* Decode the eDMA3 configuration from CCCFG register */ + cccfg = edma_read(0, EDMA_CCCFG); + + value = GET_NUM_REGN(cccfg); + edma_cc->num_region = BIT(value); + + value = GET_NUM_DMACH(cccfg); + edma_cc->num_channels = BIT(value + 1); + + value = GET_NUM_PAENTRY(cccfg); + edma_cc->num_slots = BIT(value + 4); + + value = GET_NUM_EVQUE(cccfg); + edma_cc->num_tc = value + 1; + + dev_dbg(dev, "eDMA3 HW configuration (cccfg: 0x%08x):\n", cccfg); + dev_dbg(dev, "num_region: %u\n", edma_cc->num_region); + dev_dbg(dev, "num_channel: %u\n", edma_cc->num_channels); + dev_dbg(dev, "num_slot: %u\n", edma_cc->num_slots); + dev_dbg(dev, "num_tc: %u\n", edma_cc->num_tc); + + /* Nothing need to be done if queue priority is provided */ + if (pdata->queue_priority_mapping) + return 0; + + /* + * Configure TC/queue priority as follows: + * Q0 - priority 0 + * Q1 - priority 1 + * Q2 - priority 2 + * ... + * The meaning of priority numbers: 0 highest priority, 7 lowest + * priority. So Q0 is the highest priority queue and the last queue has + * the lowest priority. + */ + queue_priority_map = devm_kzalloc(dev, + (edma_cc->num_tc + 1) * sizeof(s8), + GFP_KERNEL); + if (!queue_priority_map) + return -ENOMEM; + + for (i = 0; i < edma_cc->num_tc; i++) { + queue_priority_map[i][0] = i; + queue_priority_map[i][1] = i; + } + queue_priority_map[i][0] = -1; + queue_priority_map[i][1] = -1; + + pdata->queue_priority_mapping = queue_priority_map; + pdata->default_queue = 0; + + return 0; +} + #if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DMADEVICES) static int edma_of_read_u32_to_s16_array(const struct device_node *np, @@ -1476,50 +1543,16 @@ static int edma_of_parse_dt(struct device *dev, struct device_node *node, struct edma_soc_info *pdata) { - int ret = 0, i; - u32 value; + int ret = 0; struct property *prop; size_t sz; struct edma_rsv_info *rsv_info; - s8 (*queue_priority_map)[2]; - - ret = of_property_read_u32(node, "dma-channels", &value); - if (ret < 0) - return ret; - pdata->n_channel = value; - - ret = of_property_read_u32(node, "ti,edma-regions", &value); - if (ret < 0) - return ret; - pdata->n_region = value; - - ret = of_property_read_u32(node, "ti,edma-slots", &value); - if (ret < 0) - return ret; - pdata->n_slot = value; - - pdata->n_tc = 3; rsv_info = devm_kzalloc(dev, sizeof(struct edma_rsv_info), GFP_KERNEL); if (!rsv_info) return -ENOMEM; pdata->rsv = rsv_info; - queue_priority_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL); - if (!queue_priority_map) - return -ENOMEM; - - for (i = 0; i < 3; i++) { - queue_priority_map[i][0] = i; - queue_priority_map[i][1] = i; - } - queue_priority_map[i][0] = -1; - queue_priority_map[i][1] = -1; - - pdata->queue_priority_mapping = queue_priority_map; - - pdata->default_queue = 0; - prop = of_find_property(node, "ti,edma-xbar-event-map", &sz); if (prop) ret = edma_xbar_event_map(dev, node, pdata, sz); @@ -1639,14 +1672,12 @@ static int edma_probe(struct platform_device *pdev) if (!edma_cc[j]) return -ENOMEM; - edma_cc[j]->num_channels = min_t(unsigned, info[j]->n_channel, - EDMA_MAX_DMACH); - edma_cc[j]->num_slots = min_t(unsigned, info[j]->n_slot, - EDMA_MAX_PARAMENTRY); - edma_cc[j]->num_tc = info[j]->n_tc; + /* Get eDMA3 configuration from IP */ + ret = edma_setup_from_hw(dev, info[j], edma_cc[j]); + if (ret) + return ret; edma_cc[j]->default_queue = info[j]->default_queue; - edma_cc[j]->num_region = info[j]->n_region; dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n", edmacc_regs_base[j]);