From: Santosh Shilimkar Date: Thu, 12 Apr 2012 11:31:52 +0000 (+0530) Subject: ARM: OMAP5 / DRA7: PM: Enable Mercury retention mode on CPUx powerdomains X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=6d846c46683a4a8a54fbd30b0ff1434a7d898026;p=linux-beck.git ARM: OMAP5 / DRA7: PM: Enable Mercury retention mode on CPUx powerdomains In addition to the standard power-management technique, the OMAP5 / DRA7 MPU subsystem also employs an SR3-APG (mercury) power management technology to reduce leakage. It allows for full logic and memories retention on MPU_C0 and MPU_C1 and is controlled by the PRCM_MPU. Only "Fast-mode" is supported on the OMAP5 and DRA7 family of processors. Signed-off-by: Santosh Shilimkar [nm@ti.com: minor consolidation] Signed-off-by: Nishanth Menon Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman --- diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 63a1dd708d80..fad6e8c7e69e 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -320,6 +320,21 @@ int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) } +/* + * Enable Mercury Fast HG retention mode by default. + */ +static void enable_mercury_retention_mode(void) +{ + u32 reg; + + reg = omap4_prcm_mpu_read_inst_reg(OMAP54XX_PRCM_MPU_DEVICE_INST, + OMAP54XX_PRCM_MPU_PRM_PSCON_COUNT_OFFSET); + /* Enable HG_EN, HG_RAMPUP = fast mode */ + reg |= BIT(24) | BIT(25); + omap4_prcm_mpu_write_inst_reg(reg, OMAP54XX_PRCM_MPU_DEVICE_INST, + OMAP54XX_PRCM_MPU_PRM_PSCON_COUNT_OFFSET); +} + /* * Initialise OMAP4 MPUSS */ @@ -397,6 +412,7 @@ int __init omap4_mpuss_init(void) cpu_context_offset = OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET; } else if (soc_is_omap54xx() || soc_is_dra7xx()) { cpu_context_offset = OMAP54XX_RM_CPU0_CPU0_CONTEXT_OFFSET; + enable_mercury_retention_mode(); } return 0;