From: Vaibhav Jain Date: Fri, 19 May 2017 10:05:09 +0000 (+0530) Subject: rtc: opal: Handle disabled TPO in opal_get_tpo_time() X-Git-Tag: v4.13-rc1~40^2~44 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=6dc1cf6f932bb0ea4d8f5e913a0a401ecacd2f03;p=karo-tx-linux.git rtc: opal: Handle disabled TPO in opal_get_tpo_time() On PowerNV platform when Timed-Power-On(TPO) is disabled, read of stored TPO yields value with all date components set to '0' inside opal_get_tpo_time(). The function opal_to_tm() then converts it to an offset from year 1900 yielding alarm-time == "1900-00-01 00:00:00". This causes problems with __rtc_read_alarm() that expecting an offset from "1970-00-01 00:00:00" and returned alarm-time results in a -ve value for time64_t. Which ultimately results in this error reported in kernel logs with a seemingly garbage value: "rtc rtc0: invalid alarm value: -2-1--1041528741 2005511117:71582844:32" We fix this by explicitly handling the case of all alarm date-time components being '0' inside opal_get_tpo_time() and returning -ENOENT in such a case. This signals generic rtc that no alarm is set and it bails out from the alarm initialization flow without reporting the above error. Signed-off-by: Vaibhav Jain Reported-by: Steve Best Signed-off-by: Alexandre Belloni --- diff --git a/drivers/rtc/rtc-opal.c b/drivers/rtc/rtc-opal.c index ea20f627dabe..2d84e2a28772 100644 --- a/drivers/rtc/rtc-opal.c +++ b/drivers/rtc/rtc-opal.c @@ -142,6 +142,16 @@ static int opal_get_tpo_time(struct device *dev, struct rtc_wkalrm *alarm) y_m_d = be32_to_cpu(__y_m_d); h_m_s_ms = ((u64)be32_to_cpu(__h_m) << 32); + + /* check if no alarm is set */ + if (y_m_d == 0 && h_m_s_ms == 0) { + pr_debug("No alarm is set\n"); + rc = -ENOENT; + goto exit; + } else { + pr_debug("Alarm set to %x %llx\n", y_m_d, h_m_s_ms); + } + opal_to_tm(y_m_d, h_m_s_ms, &alarm->time); exit: