From: Avinash Patil Date: Tue, 12 Jun 2012 01:13:57 +0000 (-0700) Subject: mwifiex: fix incorrect privacy setting in beacon and probe response X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=6ddcd46463aa66855f1f8e74de454740a5f4aef4;p=linux-beck.git mwifiex: fix incorrect privacy setting in beacon and probe response Test procedure: 1. Start AP with security setting (e.g. WPA2) 2. Stop AP 3. Start AP with open security Here it's observed that privacy is enabled in beacons and probe responses. This patch fixes it by checking the privacy parameter from cfg80211_ap_settings. If privacy is not set in cfg80211_ap_settings, set open authentication and no encryption in FW. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/mwifiex/uap_cmd.c b/drivers/net/wireless/mwifiex/uap_cmd.c index 8173ab66066d..89f9a2a45de3 100644 --- a/drivers/net/wireless/mwifiex/uap_cmd.c +++ b/drivers/net/wireless/mwifiex/uap_cmd.c @@ -27,6 +27,17 @@ int mwifiex_set_secure_params(struct mwifiex_private *priv, struct cfg80211_ap_settings *params) { int i; + if (!params->privacy) { + bss_config->protocol = PROTOCOL_NO_SECURITY; + bss_config->key_mgmt = KEY_MGMT_NONE; + bss_config->wpa_cfg.length = 0; + priv->sec_info.wep_enabled = 0; + priv->sec_info.wpa_enabled = 0; + priv->sec_info.wpa2_enabled = 0; + + return 0; + } + switch (params->auth_type) { case NL80211_AUTHTYPE_OPEN_SYSTEM: bss_config->auth_mode = WLAN_AUTH_OPEN;