From: Mark Brown Date: Mon, 6 Jun 2011 15:05:13 +0000 (+0100) Subject: ASoC: Allow WM8915 BCLK calculation outside hw_params() X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=6dffdea70029f2e74c029eba3c24d07641fa4a77;p=linux-beck.git ASoC: Allow WM8915 BCLK calculation outside hw_params() Allow more dynamic management of the device clocking by allowing BCLK to be calculated when we set SYSCLK. This means that if the system is idle when hw_params() runs then we don't try to use the SYSCLK used in that case to set up the BCLK dividers, we can instead wait until a later point such as bias level configuration. This makes it easier to manage low power modes. Signed-off-by: Mark Brown Acked-by: Liam Girdwood --- diff --git a/sound/soc/codecs/wm8915.c b/sound/soc/codecs/wm8915.c index a1d8618f7e2e..423baa9be241 100644 --- a/sound/soc/codecs/wm8915.c +++ b/sound/soc/codecs/wm8915.c @@ -75,6 +75,7 @@ struct wm8915_priv { struct wm8915_pdata pdata; int rx_rate[WM8915_AIFS]; + int bclk_rate[WM8915_AIFS]; /* Platform dependant ReTune mobile configuration */ int num_retune_mobile_texts; @@ -1562,6 +1563,50 @@ static int wm8915_reset(struct snd_soc_codec *codec) return snd_soc_write(codec, WM8915_SOFTWARE_RESET, 0x8915); } +static const int bclk_divs[] = { + 1, 2, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96 +}; + +static void wm8915_update_bclk(struct snd_soc_codec *codec) +{ + struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); + int aif, best, cur_val, bclk_rate, bclk_reg, i; + + /* Don't bother if we're in a low frequency idle mode that + * can't support audio. + */ + if (wm8915->sysclk < 64000) + return; + + for (aif = 0; aif < WM8915_AIFS; aif++) { + switch (aif) { + case 0: + bclk_reg = WM8915_AIF1_BCLK; + break; + case 1: + bclk_reg = WM8915_AIF2_BCLK; + break; + } + + bclk_rate = wm8915->bclk_rate[aif]; + + /* Pick a divisor for BCLK as close as we can get to ideal */ + best = 0; + for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) { + cur_val = (wm8915->sysclk / bclk_divs[i]) - bclk_rate; + if (cur_val < 0) /* BCLK table is sorted */ + break; + best = i; + } + bclk_rate = wm8915->sysclk / bclk_divs[best]; + dev_dbg(codec->dev, "Using BCLK_DIV %d for actual BCLK %dHz\n", + bclk_divs[best], bclk_rate); + + snd_soc_update_bits(codec, bclk_reg, + WM8915_AIF1_BCLK_DIV_MASK, best); + } +} + static int wm8915_set_bias_level(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { @@ -1714,10 +1759,6 @@ static int wm8915_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) return 0; } -static const int bclk_divs[] = { - 1, 2, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96 -}; - static const int dsp_divs[] = { 48000, 32000, 16000, 8000 }; @@ -1728,17 +1769,11 @@ static int wm8915_hw_params(struct snd_pcm_substream *substream, { struct snd_soc_codec *codec = dai->codec; struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); - int bits, i, bclk_rate, best, cur_val; + int bits, i, bclk_rate; int aifdata = 0; - int bclk = 0; int lrclk = 0; int dsp = 0; - int aifdata_reg, bclk_reg, lrclk_reg, dsp_shift; - - if (!wm8915->sysclk) { - dev_err(codec->dev, "SYSCLK not configured\n"); - return -EINVAL; - } + int aifdata_reg, lrclk_reg, dsp_shift; switch (dai->id) { case 0: @@ -1750,7 +1785,6 @@ static int wm8915_hw_params(struct snd_pcm_substream *substream, aifdata_reg = WM8915_AIF1TX_DATA_CONFIGURATION_1; lrclk_reg = WM8915_AIF1_TX_LRCLK_1; } - bclk_reg = WM8915_AIF1_BCLK; dsp_shift = 0; break; case 1: @@ -1762,7 +1796,6 @@ static int wm8915_hw_params(struct snd_pcm_substream *substream, aifdata_reg = WM8915_AIF2TX_DATA_CONFIGURATION_1; lrclk_reg = WM8915_AIF2_TX_LRCLK_1; } - bclk_reg = WM8915_AIF2_BCLK; dsp_shift = WM8915_DSP2_DIV_SHIFT; break; default: @@ -1776,6 +1809,9 @@ static int wm8915_hw_params(struct snd_pcm_substream *substream, return bclk_rate; } + wm8915->bclk_rate[dai->id] = bclk_rate; + wm8915->rx_rate[dai->id] = params_rate(params); + /* Needs looking at for TDM */ bits = snd_pcm_format_width(params_format(params)); if (bits < 0) @@ -1793,18 +1829,7 @@ static int wm8915_hw_params(struct snd_pcm_substream *substream, } dsp |= i << dsp_shift; - /* Pick a divisor for BCLK as close as we can get to ideal */ - best = 0; - for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) { - cur_val = (wm8915->sysclk / bclk_divs[i]) - bclk_rate; - if (cur_val < 0) /* BCLK table is sorted */ - break; - best = i; - } - bclk_rate = wm8915->sysclk / bclk_divs[best]; - dev_dbg(dai->dev, "Using BCLK_DIV %d for actual BCLK %dHz\n", - bclk_divs[best], bclk_rate); - bclk |= best; + wm8915_update_bclk(codec); lrclk = bclk_rate / params_rate(params); dev_dbg(dai->dev, "Using LRCLK rate %d for actual LRCLK %dHz\n", @@ -1814,14 +1839,11 @@ static int wm8915_hw_params(struct snd_pcm_substream *substream, WM8915_AIF1TX_WL_MASK | WM8915_AIF1TX_SLOT_LEN_MASK, aifdata); - snd_soc_update_bits(codec, bclk_reg, WM8915_AIF1_BCLK_DIV_MASK, bclk); snd_soc_update_bits(codec, lrclk_reg, WM8915_AIF1RX_RATE_MASK, lrclk); snd_soc_update_bits(codec, WM8915_AIF_CLOCKING_2, WM8915_DSP1_DIV_SHIFT << dsp_shift, dsp); - wm8915->rx_rate[dai->id] = params_rate(params); - return 0; } @@ -1882,6 +1904,8 @@ static int wm8915_set_sysclk(struct snd_soc_dai *dai, return -EINVAL; } + wm8915_update_bclk(codec); + snd_soc_update_bits(codec, WM8915_AIF_CLOCKING_1, WM8915_SYSCLK_SRC_MASK | WM8915_SYSCLK_DIV_MASK, src << WM8915_SYSCLK_SRC_SHIFT | ratediv);