From: Giuseppe CAVALLARO Date: Mon, 22 Aug 2011 21:07:14 +0000 (+0000) Subject: net/phy: fix DP83865 phy interrupt handler X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=6e6f400f5381e08dc80e1b5a37ed02a081c179d9;p=linux-beck.git net/phy: fix DP83865 phy interrupt handler According to the DP83865 datasheet we need to clear the interrupt status bit by writing a 1 to the corresponding bit in INT_CLEAR (2:0 are reserved). Proposed and tested by Thorsten. Signed-off-by: Thorsten Schubert Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- diff --git a/drivers/net/phy/national.c b/drivers/net/phy/national.c index 0620ba963508..04bb8fcc0cb5 100644 --- a/drivers/net/phy/national.c +++ b/drivers/net/phy/national.c @@ -25,8 +25,9 @@ /* DP83865 phy identifier values */ #define DP83865_PHY_ID 0x20005c7a -#define DP83865_INT_MASK_REG 0x15 -#define DP83865_INT_MASK_STATUS 0x14 +#define DP83865_INT_STATUS 0x14 +#define DP83865_INT_MASK 0x15 +#define DP83865_INT_CLEAR 0x17 #define DP83865_INT_REMOTE_FAULT 0x0008 #define DP83865_INT_ANE_COMPLETED 0x0010 @@ -68,21 +69,25 @@ static int ns_config_intr(struct phy_device *phydev) int err; if (phydev->interrupts == PHY_INTERRUPT_ENABLED) - err = phy_write(phydev, DP83865_INT_MASK_REG, + err = phy_write(phydev, DP83865_INT_MASK, DP83865_INT_MASK_DEFAULT); else - err = phy_write(phydev, DP83865_INT_MASK_REG, 0); + err = phy_write(phydev, DP83865_INT_MASK, 0); return err; } static int ns_ack_interrupt(struct phy_device *phydev) { - int ret = phy_read(phydev, DP83865_INT_MASK_STATUS); + int ret = phy_read(phydev, DP83865_INT_STATUS); if (ret < 0) return ret; - return 0; + /* Clear the interrupt status bit by writing a “1” + * to the corresponding bit in INT_CLEAR (2:0 are reserved) */ + ret = phy_write(phydev, DP83865_INT_CLEAR, ret & ~0x7); + + return ret; } static void ns_giga_speed_fallback(struct phy_device *phydev, int mode)