From: Shannon Nelson Date: Fri, 15 Jan 2016 22:33:18 +0000 (-0800) Subject: i40e: better error reporting for nvmupdate X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=6e93d0c90fb2e20fc5b9dbdf28b45e91a16b4353;p=linux-beck.git i40e: better error reporting for nvmupdate Make sure we return EBUSY while finishing up a reset, and add a few bits for better debug messages. Change-ID: I23f6c28a8d96d7aa171abcc265737cec7826c292 Signed-off-by: Shannon Nelson Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c index 5778f9e2f43c..9fc7546bfc9b 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c +++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c @@ -1005,16 +1005,19 @@ static int i40e_get_eeprom(struct net_device *netdev, /* check for NVMUpdate access method */ magic = hw->vendor_id | (hw->device_id << 16); if (eeprom->magic && eeprom->magic != magic) { - struct i40e_nvm_access *cmd; - int errno; + struct i40e_nvm_access *cmd = (struct i40e_nvm_access *)eeprom; + int errno = 0; /* make sure it is the right magic for NVMUpdate */ if ((eeprom->magic >> 16) != hw->device_id) - return -EINVAL; + errno = -EINVAL; + else if (test_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state) || + test_bit(__I40E_RESET_INTR_RECEIVED, &pf->state)) + errno = -EBUSY; + else + ret_val = i40e_nvmupd_command(hw, cmd, bytes, &errno); - cmd = (struct i40e_nvm_access *)eeprom; - ret_val = i40e_nvmupd_command(hw, cmd, bytes, &errno); - if (ret_val && (hw->debug_mask & I40E_DEBUG_NVM)) + if ((errno || ret_val) && (hw->debug_mask & I40E_DEBUG_NVM)) dev_info(&pf->pdev->dev, "NVMUpdate read failed err=%d status=0x%x errno=%d module=%d offset=0x%x size=%d\n", ret_val, hw->aq.asq_last_status, errno, @@ -1098,27 +1101,25 @@ static int i40e_set_eeprom(struct net_device *netdev, struct i40e_netdev_priv *np = netdev_priv(netdev); struct i40e_hw *hw = &np->vsi->back->hw; struct i40e_pf *pf = np->vsi->back; - struct i40e_nvm_access *cmd; + struct i40e_nvm_access *cmd = (struct i40e_nvm_access *)eeprom; int ret_val = 0; - int errno; + int errno = 0; u32 magic; /* normal ethtool set_eeprom is not supported */ magic = hw->vendor_id | (hw->device_id << 16); if (eeprom->magic == magic) - return -EOPNOTSUPP; - + errno = -EOPNOTSUPP; /* check for NVMUpdate access method */ - if (!eeprom->magic || (eeprom->magic >> 16) != hw->device_id) - return -EINVAL; - - if (test_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state) || - test_bit(__I40E_RESET_INTR_RECEIVED, &pf->state)) - return -EBUSY; + else if (!eeprom->magic || (eeprom->magic >> 16) != hw->device_id) + errno = -EINVAL; + else if (test_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state) || + test_bit(__I40E_RESET_INTR_RECEIVED, &pf->state)) + errno = -EBUSY; + else + ret_val = i40e_nvmupd_command(hw, cmd, bytes, &errno); - cmd = (struct i40e_nvm_access *)eeprom; - ret_val = i40e_nvmupd_command(hw, cmd, bytes, &errno); - if (ret_val && (hw->debug_mask & I40E_DEBUG_NVM)) + if ((errno || ret_val) && (hw->debug_mask & I40E_DEBUG_NVM)) dev_info(&pf->pdev->dev, "NVMUpdate write failed err=%d status=0x%x errno=%d module=%d offset=0x%x size=%d\n", ret_val, hw->aq.asq_last_status, errno, diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 7869d74c8820..384912b5a9cc 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -3475,6 +3475,7 @@ static irqreturn_t i40e_intr(int irq, void *data) if (icr0 & I40E_PFINT_ICR0_ADMINQ_MASK) { ena_mask &= ~I40E_PFINT_ICR0_ENA_ADMINQ_MASK; set_bit(__I40E_ADMINQ_EVENT_PENDING, &pf->state); + i40e_debug(&pf->hw, I40E_DEBUG_NVM, "AdminQ event\n"); } if (icr0 & I40E_PFINT_ICR0_MAL_DETECT_MASK) { @@ -6332,7 +6333,9 @@ static void i40e_clean_adminq_subtask(struct i40e_pf *pf) case i40e_aqc_opc_nvm_erase: case i40e_aqc_opc_nvm_update: case i40e_aqc_opc_oem_post_update: - i40e_debug(&pf->hw, I40E_DEBUG_NVM, "ARQ NVM operation completed\n"); + i40e_debug(&pf->hw, I40E_DEBUG_NVM, + "ARQ NVM operation 0x%04x completed\n", + opcode); break; default: dev_info(&pf->pdev->dev,