From: Jeff Garzik Date: Wed, 24 May 2006 04:28:37 +0000 (-0400) Subject: [netdrvr pcnet_cs, myri] trim trailing whitespace X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=6ed14254cb6e269030ff09bed8673473b7be0283;p=linux-beck.git [netdrvr pcnet_cs, myri] trim trailing whitespace --- diff --git a/drivers/net/myri10ge/myri10ge_mcp.h b/drivers/net/myri10ge/myri10ge_mcp.h index ac23e18db63d..0a6cae6cb186 100644 --- a/drivers/net/myri10ge/myri10ge_mcp.h +++ b/drivers/net/myri10ge/myri10ge_mcp.h @@ -35,17 +35,17 @@ struct mcp_cmd_response { u32 result; }; -/* +/* * flags used in mcp_kreq_ether_send_t: - * + * * The SMALL flag is only needed in the first segment. It is raised * for packets that are total less or equal 512 bytes. - * + * * The CKSUM flag must be set in all segments. - * + * * The PADDED flags is set if the packet needs to be padded, and it * must be set for all segments. - * + * * The MXGEFW_FLAGS_ALIGN_ODD must be set if the cumulative * length of all previous segments was odd. */ @@ -111,7 +111,7 @@ enum myri10ge_mcp_cmd_type { MXGEFW_CMD_SET_BIG_BUFFER_SIZE, /* in bytes, power of 2 */ MXGEFW_CMD_SET_SMALL_BUFFER_SIZE, /* in bytes */ - /* Parameters which refer to lanai SRAM addresses where the + /* Parameters which refer to lanai SRAM addresses where the * driver must issue PIO writes for various things */ MXGEFW_CMD_GET_SEND_OFFSET, @@ -128,7 +128,7 @@ enum myri10ge_mcp_cmd_type { /* Parameters which refer to rings stored in the host, * and whose size is controlled by the host. Note that - * all must be physically contiguous and must contain + * all must be physically contiguous and must contain * a power of 2 number of entries. */ MXGEFW_CMD_SET_INTRQ_SIZE, /* in bytes */ diff --git a/drivers/net/myri10ge/myri10ge_mcp_gen_header.h b/drivers/net/myri10ge/myri10ge_mcp_gen_header.h index 1d3a35f10789..487f7792fd46 100644 --- a/drivers/net/myri10ge/myri10ge_mcp_gen_header.h +++ b/drivers/net/myri10ge/myri10ge_mcp_gen_header.h @@ -7,17 +7,17 @@ * the .data section, because some fields needs to be initialized at * compile time. * The 32bit word at offset MX_HEADER_PTR_OFFSET in the mcp must - * contains the location of the header. - * + * contains the location of the header. + * * Typically a MCP will start with the following: * .text * .space 52 ! to help catch MEMORY_INT errors * bt start ! jump to real code * nop * .long _gen_mcp_header - * + * * The source will have a definition like: - * + * * mcp_gen_header_t gen_mcp_header = { * .header_length = sizeof(mcp_gen_header_t), * .mcp_type = MCP_TYPE_XXX, @@ -46,11 +46,11 @@ struct mcp_gen_header { unsigned string_specs_len; /* Fields above this comment are guaranteed to be present. - * + * * Fields below this comment are extensions added in later versions * of this struct, drivers should compare the header_length against * offsetof(field) to check wether a given MCP implements them. - * + * * Never remove any field. Keep everything naturally align. */ }; diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 4506b61262dc..661bfe54ff5d 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -12,7 +12,7 @@ Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net pcnet_cs.c 1.153 2003/11/09 18:53:09 - + The network driver code is based on Donald Becker's NE2000 code: Written 1992,1993 by Donald Becker. @@ -146,7 +146,7 @@ typedef struct hw_info_t { #define MII_PHYID_REG2 0x03 static hw_info_t hw_info[] = { - { /* Accton EN2212 */ 0x0ff0, 0x00, 0x00, 0xe8, DELAY_OUTPUT }, + { /* Accton EN2212 */ 0x0ff0, 0x00, 0x00, 0xe8, DELAY_OUTPUT }, { /* Allied Telesis LA-PCM */ 0x0ff0, 0x00, 0x00, 0xf4, 0 }, { /* APEX MultiCard */ 0x03f4, 0x00, 0x20, 0xe5, 0 }, { /* ASANTE FriendlyNet */ 0x4910, 0x00, 0x00, 0x94, @@ -193,7 +193,7 @@ static hw_info_t hw_info[] = { { /* NE2000 Compatible */ 0x0ff0, 0x00, 0xa0, 0x0c, 0 }, { /* Network General Sniffer */ 0x0ff0, 0x00, 0x00, 0x65, HAS_MISC_REG | HAS_IBM_MISC }, - { /* Panasonic VEL211 */ 0x0ff0, 0x00, 0x80, 0x45, + { /* Panasonic VEL211 */ 0x0ff0, 0x00, 0x80, 0x45, HAS_MISC_REG | HAS_IBM_MISC }, { /* PreMax PE-200 */ 0x07f0, 0x00, 0x20, 0xe0, 0 }, { /* RPTI EP400 */ 0x0110, 0x00, 0x40, 0x95, 0 }, @@ -330,7 +330,7 @@ static hw_info_t *get_hwinfo(struct pcmcia_device *link) for (j = 0; j < 6; j++) dev->dev_addr[j] = readb(base + (j<<1)); } - + iounmap(virt); j = pcmcia_release_window(link->win); if (j != CS_SUCCESS) @@ -490,7 +490,7 @@ static int try_io_port(struct pcmcia_device *link) if (link->io.NumPorts2 > 0) { /* for master/slave multifunction cards */ link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - link->irq.Attributes = + link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED; } } else { @@ -543,19 +543,19 @@ static int pcnet_config(struct pcmcia_device *link) manfid = le16_to_cpu(buf[0]); prodid = le16_to_cpu(buf[1]); } - + tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; tuple.Attributes = 0; CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); while (last_ret == CS_SUCCESS) { cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); cistpl_io_t *io = &(parse.cftable_entry.io); - + if (pcmcia_get_tuple_data(link, &tuple) != 0 || pcmcia_parse_tuple(link, &tuple, &parse) != 0 || cfg->index == 0 || cfg->io.nwin == 0) goto next_entry; - + link->conf.ConfigIndex = cfg->index; /* For multifunction cards, by convention, we configure the network function with window 0, and serial with window 1 */ @@ -584,7 +584,7 @@ static int pcnet_config(struct pcmcia_device *link) } CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); - + if (link->io.NumPorts2 == 8) { link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status = CCSR_AUDIO_ENA; @@ -592,7 +592,7 @@ static int pcnet_config(struct pcmcia_device *link) if ((manfid == MANFID_IBM) && (prodid == PRODID_IBM_HOME_AND_AWAY)) link->conf.ConfigIndex |= 0x10; - + CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); dev->irq = link->irq.AssignedIRQ; dev->base_addr = link->io.BasePort1; @@ -614,7 +614,7 @@ static int pcnet_config(struct pcmcia_device *link) hw_info = get_ax88190(link); if (hw_info == NULL) hw_info = get_hwired(link); - + if (hw_info == NULL) { printk(KERN_NOTICE "pcnet_cs: unable to read hardware net" " address for io base %#3lx\n", dev->base_addr); @@ -631,7 +631,7 @@ static int pcnet_config(struct pcmcia_device *link) info->flags &= ~USE_BIG_BUF; if (!use_big_buf) info->flags &= ~USE_BIG_BUF; - + if (info->flags & USE_BIG_BUF) { start_pg = SOCKET_START_PG; stop_pg = SOCKET_STOP_PG; @@ -929,7 +929,7 @@ static void set_misc_reg(struct net_device *dev) kio_addr_t nic_base = dev->base_addr; pcnet_dev_t *info = PRIV(dev); u_char tmp; - + if (info->flags & HAS_MISC_REG) { tmp = inb_p(nic_base + PCNET_MISC) & ~3; if (dev->if_port == 2) @@ -1022,7 +1022,7 @@ static int pcnet_close(struct net_device *dev) ei_close(dev); free_irq(dev->irq, dev); - + link->open--; netif_stop_queue(dev); del_timer_sync(&info->watchdog); @@ -1054,12 +1054,12 @@ static void pcnet_reset_8390(struct net_device *dev) udelay(100); } outb_p(ENISR_RESET, nic_base + EN0_ISR); /* Ack intr. */ - + if (i == 100) printk(KERN_ERR "%s: pcnet_reset_8390() did not complete.\n", dev->name); set_misc_reg(dev); - + } /* pcnet_reset_8390 */ /*====================================================================*/ @@ -1233,7 +1233,7 @@ static void dma_get_8390_hdr(struct net_device *dev, dev->name, ei_status.dmaing, ei_status.irqlock); return; } - + ei_status.dmaing |= 0x01; outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + PCNET_CMD); outb_p(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO); @@ -1458,7 +1458,7 @@ static void shmem_get_8390_hdr(struct net_device *dev, void __iomem *xfer_start = ei_status.mem + (TX_PAGES<<8) + (ring_page << 8) - (ei_status.rx_start_page << 8); - + copyin(hdr, xfer_start, sizeof(struct e8390_pkt_hdr)); /* Fix for big endian systems */ hdr->count = le16_to_cpu(hdr->count); @@ -1473,7 +1473,7 @@ static void shmem_block_input(struct net_device *dev, int count, unsigned long offset = (TX_PAGES<<8) + ring_offset - (ei_status.rx_start_page << 8); char *buf = skb->data; - + if (offset + count > ei_status.priv) { /* We must wrap the input move. */ int semi_count = ei_status.priv - offset; @@ -1541,7 +1541,7 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg, info->base = NULL; link->win = NULL; goto failed; } - + ei_status.mem = info->base + offset; ei_status.priv = req.Size; dev->mem_start = (u_long)ei_status.mem; @@ -1768,7 +1768,7 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "NE2K.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "PE-200.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "tamarack.cis"), - PCMCIA_DEVICE_PROD_ID123("Fast Ethernet", "CF Size PC Card", "1.0", + PCMCIA_DEVICE_PROD_ID123("Fast Ethernet", "CF Size PC Card", "1.0", 0xb4be14e3, 0x43ac239b, 0x0877b627), PCMCIA_DEVICE_NULL };