From: Rob Herring <rob.herring@calxeda.com>
Date: Wed, 4 Jul 2012 19:16:12 +0000 (-0500)
Subject: i2c: iop3xx: use standard gpiolib functions
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=701eb2647d7986b42fa973990649a83b3e15e8eb;p=linux-beck.git

i2c: iop3xx: use standard gpiolib functions

Instead of using the custom iop3xx gpio functions, use the gpiolib
variants. This should be functionally the same since the gpiolib
just calls the iop3xx gpio functions. This is needed in preparation
of removing iop3xx mach/io.h headers.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: "Jean Delvare (PC drivers, core)" <khali@linux-fr.org>
Cc: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
Cc: linux-i2c@vger.kernel.org
---

diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index 567d87389e3c..2f99613fd677 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -39,6 +39,7 @@
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 
 #include "i2c-iop3xx.h"
 
@@ -78,11 +79,11 @@ iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap)
 	 */
 #if defined(CONFIG_ARCH_IOP32X) || defined(CONFIG_ARCH_IOP33X)
 	if (iop3xx_adap->id == 0) {
-		gpio_line_set(IOP3XX_GPIO_LINE(7), GPIO_LOW);
-		gpio_line_set(IOP3XX_GPIO_LINE(6), GPIO_LOW);
+		gpio_set_value(7, 0);
+		gpio_set_value(6, 0);
 	} else {
-		gpio_line_set(IOP3XX_GPIO_LINE(5), GPIO_LOW);
-		gpio_line_set(IOP3XX_GPIO_LINE(4), GPIO_LOW);
+		gpio_set_value(5, 0);
+		gpio_set_value(4, 0);
 	}
 #endif
 	/* NB SR bits not same position as CR IE bits :-( */