From: Stephen Boyd Date: Wed, 14 May 2014 18:58:55 +0000 (-0700) Subject: Input: pmic8xxx-pwrkey - set sane default for debounce time X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=70a26071f8552a0f193cf442f424decfe0f2e569;p=linux-beck.git Input: pmic8xxx-pwrkey - set sane default for debounce time If the debounce time is 0 our usage of ilog2() later on in this driver will cause undefined behavior. If CONFIG_OF=n this fact is evident to the compiler, and it emits a call to ____ilog2_NaN() which doesn't exist. Fix this by setting a sane default for debounce and failing to probe if debounce is 0 in the DT. Reported-by: Arnd Bergmann Signed-off-by: Stephen Boyd Signed-off-by: Dmitry Torokhov --- diff --git a/drivers/input/misc/pmic8xxx-pwrkey.c b/drivers/input/misc/pmic8xxx-pwrkey.c index 1cb8fda7a166..c91e3d33aea9 100644 --- a/drivers/input/misc/pmic8xxx-pwrkey.c +++ b/drivers/input/misc/pmic8xxx-pwrkey.c @@ -92,15 +92,15 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev) bool pull_up; if (of_property_read_u32(pdev->dev.of_node, "debounce", &kpd_delay)) - kpd_delay = 0; + kpd_delay = 15625; - pull_up = of_property_read_bool(pdev->dev.of_node, "pull-up"); - - if (kpd_delay > 62500) { + if (kpd_delay > 62500 || kpd_delay == 0) { dev_err(&pdev->dev, "invalid power key trigger delay\n"); return -EINVAL; } + pull_up = of_property_read_bool(pdev->dev.of_node, "pull-up"); + regmap = dev_get_regmap(pdev->dev.parent, NULL); if (!regmap) { dev_err(&pdev->dev, "failed to locate regmap for the device\n");