From: yinbo.zhu Date: Wed, 31 May 2017 09:03:59 +0000 (+0800) Subject: arm64: dts: ls208xa: disable SD UHS-I modes by default on RDB X-Git-Tag: v4.13-rc1~165^2~8^2~4 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=715c32da6d61a043f2085b77618b9d20ef68961f;p=karo-tx-linux.git arm64: dts: ls208xa: disable SD UHS-I modes by default on RDB Currently SD UHS-I modes were enabled by default on LS208xARDB boards, but the new LS2088ARDB RevF board didn't support them any more since SDHC circuit had been reworked. This patch is to disable SD UHS-I modes by default in case of any issue on LS2088ARDB RevF Signed-off-by: yinbo.zhu Acked-by: Yangbo Lu Signed-off-by: Shawn Guo --- diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi index 29af54be2665..9a1d0d2ab1c3 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi @@ -46,10 +46,6 @@ */ &esdhc { - sd-uhs-sdr104; - sd-uhs-sdr50; - sd-uhs-sdr25; - sd-uhs-sdr12; status = "okay"; };