From: Alexander Shiyan Date: Tue, 21 Aug 2012 16:59:34 +0000 (+0400) Subject: ARM: clps711x: Fix lowlevel debug-macro X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=7255f87a7169689be2d4722375744a1f932d4b28;p=linux-beck.git ARM: clps711x: Fix lowlevel debug-macro CTS signal can not be used for the port and tied to any logic state. In this case we have an infinite loop waiting for the signal. For fix this problem, checking CTS removed, waiting for the signal "busy" was postponed after the byte write to the port. Signed-off-by: Alexander Shiyan --- diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S index 118b3d930573..cb3684f8dae0 100644 --- a/arch/arm/mach-clps711x/include/mach/debug-macro.S +++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S @@ -28,17 +28,11 @@ .endm .macro waituart,rd,rx -1001: ldr \rd, [\rx, #0x0140] @ SYSFLGx - tst \rd, #1 << 11 @ UBUSYx - bne 1001b .endm .macro busyuart,rd,rx - tst \rx, #0x1000 @ UART2 does not have CTS here - bne 1002f 1001: ldr \rd, [\rx, #0x0140] @ SYSFLGx - tst \rd, #1 << 8 @ CTS + tst \rd, #1 << 11 @ UBUSYx bne 1001b -1002: .endm