From: Grant Grundler Date: Thu, 1 Jun 2006 17:15:59 +0000 (-0600) Subject: [PATCH] PCI: clean up pci documentation to be more specific X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=733a7fe12248072e1bca729c88a26298666f1956;p=linux-beck.git [PATCH] PCI: clean up pci documentation to be more specific On Thu, Jun 01, 2006 at 02:46:11AM -0700, Rajesh Shah wrote: > This patch assumes that pci_request_region() will always be called > after pci_enable_device() and pci_release_region() will always > be called before pci_disable_device(). We cannot make this > assumption,since it's perfectly legal to disable a device > first and then release it's regions. So, I think that patch > needs to change. Patch below clarifies comments in Documentation/pci.txt. Signed-off-by: Grant Grundler Signed-off-by: Greg Kroah-Hartman --- diff --git a/Documentation/pci.txt b/Documentation/pci.txt index 66bbbf1d1ef6..3242e5c1ee9c 100644 --- a/Documentation/pci.txt +++ b/Documentation/pci.txt @@ -213,9 +213,17 @@ have been remapped by the kernel. See Documentation/IO-mapping.txt for how to access device memory. - You still need to call request_region() for I/O regions and -request_mem_region() for memory regions to make sure nobody else is using the -same device. + The device driver needs to call pci_request_region() to make sure +no other device is already using the same resource. The driver is expected +to determine MMIO and IO Port resource availability _before_ calling +pci_enable_device(). Conversely, drivers should call pci_release_region() +_after_ calling pci_disable_device(). The idea is to prevent two devices +colliding on the same address range. + +Generic flavors of pci_request_region() are request_mem_region() +(for MMIO ranges) and request_region() (for IO Port ranges). +Use these for address resources that are not described by "normal" PCI +interfaces (e.g. BAR). All interrupt handlers should be registered with SA_SHIRQ and use the devid to map IRQs to devices (remember that all PCI interrupts are shared).