From: Ben Hutchings Date: Tue, 27 Jan 2015 00:49:32 +0000 (+0000) Subject: sh_eth: Ensure DMA engines are stopped before freeing buffers X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=740c7f31c094703c;p=linux-beck.git sh_eth: Ensure DMA engines are stopped before freeing buffers Currently we try to clear EDRRR and EDTRR and immediately continue to free buffers. This is unsafe because: - In general, register writes are not serialised with DMA, so we still have to wait for DMA to complete somehow - The R8A7790 (R-Car H2) manual states that the TX running flag cannot be cleared by writing to EDTRR - The same manual states that clearing the RX running flag only stops RX DMA at the next packet boundary I applied this patch to the driver to detect DMA writes to freed buffers: > --- a/drivers/net/ethernet/renesas/sh_eth.c > +++ b/drivers/net/ethernet/renesas/sh_eth.c > @@ -1098,7 +1098,14 @@ static void sh_eth_ring_free(struct net_device *ndev) > /* Free Rx skb ringbuffer */ > if (mdp->rx_skbuff) { > for (i = 0; i < mdp->num_rx_ring; i++) > + memcpy(mdp->rx_skbuff[i]->data, > + "Hello, world", 12); > + msleep(100); > + for (i = 0; i < mdp->num_rx_ring; i++) { > + WARN_ON(memcmp(mdp->rx_skbuff[i]->data, > + "Hello, world", 12)); > dev_kfree_skb(mdp->rx_skbuff[i]); > + } > } > kfree(mdp->rx_skbuff); > mdp->rx_skbuff = NULL; then ran the loop: while ethtool -G eth0 rx 128 ; ethtool -G eth0 rx 64; do echo -n .; done and 'ping -f' toward the sh_eth port from another machine. The warning fired several times a minute. To fix these issues: - Deactivate all TX descriptors rather than writing to EDTRR - As there seems to be no way of telling when RX DMA is stopped, perform a soft reset to ensure that both DMA enginess are stopped - To reduce the possibility of the reset truncating a transmitted frame, disable egress and wait a reasonable time to reach a packet boundary before resetting - Update statistics before resetting (The 'reasonable time' does not allow for CS/CD in half-duplex mode, but half-duplex no longer seems reasonable!) Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index bb15cd83134f..245166bbccfd 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -396,6 +396,9 @@ static const u16 sh_eth_offset_fast_sh3_sh2[SH_ETH_MAX_REGISTER_OFFSET] = { [TSU_ADRL31] = 0x01fc, }; +static void sh_eth_rcv_snd_disable(struct net_device *ndev); +static struct net_device_stats *sh_eth_get_stats(struct net_device *ndev); + static bool sh_eth_is_gether(struct sh_eth_private *mdp) { return mdp->reg_offset == sh_eth_offset_gigabit; @@ -1358,6 +1361,33 @@ static int sh_eth_dev_init(struct net_device *ndev, bool start) return ret; } +static void sh_eth_dev_exit(struct net_device *ndev) +{ + struct sh_eth_private *mdp = netdev_priv(ndev); + int i; + + /* Deactivate all TX descriptors, so DMA should stop at next + * packet boundary if it's currently running + */ + for (i = 0; i < mdp->num_tx_ring; i++) + mdp->tx_ring[i].status &= ~cpu_to_edmac(mdp, TD_TACT); + + /* Disable TX FIFO egress to MAC */ + sh_eth_rcv_snd_disable(ndev); + + /* Stop RX DMA at next packet boundary */ + sh_eth_write(ndev, 0, EDRRR); + + /* Aside from TX DMA, we can't tell when the hardware is + * really stopped, so we need to reset to make sure. + * Before doing that, wait for long enough to *probably* + * finish transmitting the last packet and poll stats. + */ + msleep(2); /* max frame time at 10 Mbps < 1250 us */ + sh_eth_get_stats(ndev); + sh_eth_reset(ndev); +} + /* free Tx skb function */ static int sh_eth_txfree(struct net_device *ndev) { @@ -1986,9 +2016,7 @@ static int sh_eth_set_ringparam(struct net_device *ndev, napi_synchronize(&mdp->napi); sh_eth_write(ndev, 0x0000, EESIPR); - /* Stop the chip's Tx and Rx processes. */ - sh_eth_write(ndev, 0, EDTRR); - sh_eth_write(ndev, 0, EDRRR); + sh_eth_dev_exit(ndev); /* Free all the skbuffs in the Rx queue. */ sh_eth_ring_free(ndev); @@ -2207,11 +2235,8 @@ static int sh_eth_close(struct net_device *ndev) napi_disable(&mdp->napi); sh_eth_write(ndev, 0x0000, EESIPR); - /* Stop the chip's Tx and Rx processes. */ - sh_eth_write(ndev, 0, EDTRR); - sh_eth_write(ndev, 0, EDRRR); + sh_eth_dev_exit(ndev); - sh_eth_get_stats(ndev); /* PHY Disconnect */ if (mdp->phydev) { phy_stop(mdp->phydev);