From: Kevin McKinney Date: Sat, 5 Jan 2013 04:35:03 +0000 (-0500) Subject: Staging: bcm: Properly format comments in Debug.h X-Git-Tag: next-20130218~26^2~626 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=744467eaf0cdc1bb48fcad4f347b393aeb3c1902;p=karo-tx-linux.git Staging: bcm: Properly format comments in Debug.h This patch properly formats comments, and removes them as needed in Debug.h. Signed-off-by: Kevin McKinney Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/bcm/Debug.h b/drivers/staging/bcm/Debug.h index 70189d08ea69..2917ed316e12 100644 --- a/drivers/staging/bcm/Debug.h +++ b/drivers/staging/bcm/Debug.h @@ -9,43 +9,40 @@ #include #define NONE 0xFFFF -//-------------------------------------------------------------------------------- /* TYPE and SUBTYPE * Define valid TYPE (or category or code-path, however you like to think of it) * and SUBTYPE s. * Type and SubType are treated as bitmasks. */ -/*-----------------BEGIN TYPEs------------------------------------------*/ -#define DBG_TYPE_INITEXIT (1 << 0) // 1 -#define DBG_TYPE_TX (1 << 1) // 2 -#define DBG_TYPE_RX (1 << 2) // 4 -#define DBG_TYPE_OTHERS (1 << 3) // 8 -/*-----------------END TYPEs------------------------------------------*/ -#define NUMTYPES 4 // careful! -/*-----------------BEGIN SUBTYPEs---------------------------------------*/ - -/*-SUBTYPEs for TX : TYPE is DBG_TYPE_TX -----// - Transmit.c ,Arp.c, LeakyBucket.c, And Qos.c - total 17 macros */ -// Transmit.c +#define DBG_TYPE_INITEXIT (1 << 0) /* 1 */ +#define DBG_TYPE_TX (1 << 1) /* 2 */ +#define DBG_TYPE_RX (1 << 2) /* 4 */ +#define DBG_TYPE_OTHERS (1 << 3) /* 8 */ +#define NUMTYPES 4 + +/* -SUBTYPEs for TX : TYPE is DBG_TYPE_TX -----// + * Transmit.c ,Arp.c, LeakyBucket.c, And Qos.c + * total 17 macros + */ +/* Transmit.c */ #define TX 1 #define MP_SEND (TX << 0) #define NEXT_SEND (TX << 1) #define TX_FIFO (TX << 2) #define TX_CONTROL (TX << 3) -// Arp.c +/* Arp.c */ #define IP_ADDR (TX << 4) #define ARP_REQ (TX << 5) #define ARP_RESP (TX << 6) -// Leakybucket.c +/* Leakybucket.c */ #define TOKEN_COUNTS (TX << 8) #define CHECK_TOKENS (TX << 9) #define TX_PACKETS (TX << 10) #define TIMER (TX << 11) -// Qos.c +/* Qos.c */ #define QOS TX #define QUEUE_INDEX (QOS << 12) #define IPV4_DBG (QOS << 13) @@ -53,12 +50,13 @@ #define PRUNE_QUEUE (QOS << 15) #define SEND_QUEUE (QOS << 16) -//TX_Misc +/* TX_Misc */ #define TX_OSAL_DBG (TX << 17) -//--SUBTYPEs for ------INIT & EXIT--------------------- -/*------------ TYPE is DBG_TYPE_INITEXIT -----// -DriverEntry.c, bcmfwup.c, ChipDetectTask.c, HaltnReset.c, InterfaceDDR.c */ +/* --SUBTYPEs for ------INIT & EXIT--------------------- + * ------------ TYPE is DBG_TYPE_INITEXIT -----// + * DriverEntry.c, bcmfwup.c, ChipDetectTask.c, HaltnReset.c, InterfaceDDR.c + */ #define MP 1 #define DRV_ENTRY (MP << 0) #define MP_INIT (MP << 1) @@ -69,9 +67,10 @@ DriverEntry.c, bcmfwup.c, ChipDetectTask.c, HaltnReset.c, InterfaceDDR.c */ #define INIT_DISP (MP << 6) #define RX_INIT (MP << 7) -//-SUBTYPEs for --RX---------------------------------- -//------------RX : TYPE is DBG_TYPE_RX -----// -// Receive.c +/* -SUBTYPEs for --RX---------------------------------- + * ------------RX : TYPE is DBG_TYPE_RX -----// + * Receive.c + */ #define RX 1 #define RX_DPC (RX << 0) #define RX_CTRL (RX << 3) @@ -79,27 +78,27 @@ DriverEntry.c, bcmfwup.c, ChipDetectTask.c, HaltnReset.c, InterfaceDDR.c */ #define MP_RETURN (RX << 1) #define LINK_MSG (RX << 2) -//-SUBTYPEs for ----OTHER ROUTINES------------------ -//------------OTHERS : TYPE is DBG_TYPE_OTHER -----// -// HaltnReset,CheckForHang,PnP,Misc,CmHost -// total 12 macros +/* -SUBTYPEs for ----OTHER ROUTINES------------------ + * ------------OTHERS : TYPE is DBG_TYPE_OTHER -----// + * HaltnReset,CheckForHang,PnP,Misc,CmHost + * total 12 macros + */ #define OTHERS 1 -// ??ISR.C #define ISR OTHERS #define MP_DPC (ISR << 0) -// HaltnReset.c +/* HaltnReset.c */ #define HALT OTHERS #define MP_HALT (HALT << 1) #define CHECK_HANG (HALT << 2) #define MP_RESET (HALT << 3) #define MP_SHUTDOWN (HALT << 4) -// pnp.c +/* pnp.c */ #define PNP OTHERS #define MP_PNP (PNP << 5) -// Misc.c +/* Misc.c */ #define MISC OTHERS #define DUMP_INFO (MISC << 6) #define CLASSIFY (MISC << 7) @@ -108,14 +107,14 @@ DriverEntry.c, bcmfwup.c, ChipDetectTask.c, HaltnReset.c, InterfaceDDR.c */ #define DUMP_CONTROL (MISC << 10) #define LED_DUMP_INFO (MISC << 11) -// CmHost.c +/* CmHost.c */ #define CMHOST OTHERS #define SERIAL (OTHERS << 12) #define IDLE_MODE (OTHERS << 13) #define WRM (OTHERS << 14) #define RDM (OTHERS << 15) -// TODO - put PHS_SEND in Tx PHS_RECEIVE in Rx path ? +/* TODO - put PHS_SEND in Tx PHS_RECEIVE in Rx path ? */ #define PHS_SEND (OTHERS << 16) #define PHS_RECEIVE (OTHERS << 17) #define PHS_MODULE (OTHERS << 18) @@ -133,7 +132,6 @@ DriverEntry.c, bcmfwup.c, ChipDetectTask.c, HaltnReset.c, InterfaceDDR.c */ #define HOST_MIBS (OTHERS << 28) #define CONN_MSG (CMHOST << 29) -/*-----------------END SUBTYPEs------------------------------------------*/ /* Debug level * We have 8 debug levels, in (numerical) increasing order of verbosity. @@ -154,13 +152,14 @@ DriverEntry.c, bcmfwup.c, ChipDetectTask.c, HaltnReset.c, InterfaceDDR.c */ #define BCM_SCREAM 2 #define BCM_ERR 1 /* Not meant for developer in debug prints. - * To be used to disable all prints by setting the DBG_LVL_CURR to this value */ + * To be used to disable all prints by setting the DBG_LVL_CURR to this value + */ #define BCM_NONE 0 /* The current driver logging level. * Everything at this level and (numerically) lower (meaning higher prio) * is logged. -* Replace 'BCM_ALL' in the DBG_LVL_CURR macro with the logging level desired. + * Replace 'BCM_ALL' in the DBG_LVL_CURR macro with the logging level desired. * For eg. to set the logging level to 'errors only' use: * #define DBG_LVL_CURR (BCM_ERR) */ @@ -168,7 +167,7 @@ DriverEntry.c, bcmfwup.c, ChipDetectTask.c, HaltnReset.c, InterfaceDDR.c */ #define DBG_LVL_CURR (BCM_ALL) #define DBG_LVL_ALL BCM_ALL -/*---Userspace mapping of Debug State. +/* ---Userspace mapping of Debug State. * Delibrately matches that of the Windows driver.. * The TestApp's ioctl passes this struct to us. */ @@ -176,10 +175,10 @@ typedef struct { unsigned int Subtype, Type; unsigned int OnOff; -// unsigned int debug_level; /* future expansion */ +/* unsigned int debug_level; future expansion */ } __attribute__((packed)) USER_BCM_DBG_STATE; -//---Kernel-space mapping of Debug State +/* ---Kernel-space mapping of Debug State */ typedef struct _S_BCM_DEBUG_STATE { UINT type; /* A bitmap of 32 bits for Subtype per Type. @@ -190,13 +189,14 @@ typedef struct _S_BCM_DEBUG_STATE { UINT subtype[(NUMTYPES*2)+1]; UINT debug_level; } S_BCM_DEBUG_STATE; -/* Instantiated in the Adapter structure */ -/* We'll reuse the debug level parameter to include a bit (the MSB) to indicate whether or not - * we want the function's name printed. */ +/* Instantiated in the Adapter structure + * We'll reuse the debug level parameter to include a bit (the MSB) to indicate whether or not + * we want the function's name printed. + */ #define DBG_NO_FUNC_PRINT 1 << 31 #define DBG_LVL_BITMASK 0xFF -//--- Only for direct printk's; "hidden" to API. +/* --- Only for direct printk's; "hidden" to API. */ #define DBG_TYPE_PRINTK 3 #define BCM_DEBUG_PRINT(Adapter, Type, SubType, dbg_level, string, args...) \ @@ -232,7 +232,8 @@ typedef struct _S_BCM_DEBUG_STATE { for (i = 0; i < (NUMTYPES * 2) + 1; i++) { \ if ((i == 1) || (i == 2) || (i == 4) || (i == 8)) { \ /* CAUTION! Forcefully turn on ALL debug paths and subpaths! \ - Adapter->stDebugState.subtype[i] = 0xffffffff; */ \ + * Adapter->stDebugState.subtype[i] = 0xffffffff; \ + */ \ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "subtype[%d] = 0x%08x\n", \ i, Adapter->stDebugState.subtype[i]); \ } \