From: Ralf Baechle Date: Wed, 19 Oct 2005 14:40:02 +0000 (+0100) Subject: [PATCH] sb1250-mac: Whitespace cleanup. X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=74b0247fbd4b6ed1693a420d85cf50267d840ef4;p=linux-beck.git [PATCH] sb1250-mac: Whitespace cleanup. Signed-off-by: Ralf Baechle drivers/net/sb1250-mac.c | 1030 +++++++++++++++++++++++------------------------ 1 files changed, 515 insertions(+), 515 deletions(-) Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c index f7dda6fabe82..d4c8ecdfa4a7 100644 --- a/drivers/net/sb1250-mac.c +++ b/drivers/net/sb1250-mac.c @@ -10,7 +10,7 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. @@ -127,7 +127,7 @@ typedef enum { sbmac_duplex_auto, sbmac_duplex_half, typedef enum { sbmac_fc_auto, sbmac_fc_disabled, sbmac_fc_frame, sbmac_fc_collision, sbmac_fc_carrier } sbmac_fc_t; -typedef enum { sbmac_state_uninit, sbmac_state_off, sbmac_state_on, +typedef enum { sbmac_state_uninit, sbmac_state_off, sbmac_state_on, sbmac_state_broken } sbmac_state_t; @@ -147,8 +147,8 @@ typedef enum { sbmac_state_uninit, sbmac_state_off, sbmac_state_on, #define ETHER_ALIGN 2 #define ETHER_ADDR_LEN 6 -#define ENET_PACKET_SIZE 1518 -/*#define ENET_PACKET_SIZE 9216 */ +#define ENET_PACKET_SIZE 1518 +/*#define ENET_PACKET_SIZE 9216 */ /********************************************************************** * DMA Descriptor structure @@ -166,12 +166,12 @@ typedef unsigned long paddr_t; ********************************************************************* */ typedef struct sbmacdma_s { - - /* + + /* * This stuff is used to identify the channel and the registers * associated with it. */ - + struct sbmac_softc *sbdma_eth; /* back pointer to associated MAC */ int sbdma_channel; /* channel number */ int sbdma_txdir; /* direction (1=transmit) */ @@ -186,16 +186,16 @@ typedef struct sbmacdma_s { volatile void __iomem *sbdma_dscrbase; /* Descriptor base address */ volatile void __iomem *sbdma_dscrcnt; /* Descriptor count register */ volatile void __iomem *sbdma_curdscr; /* current descriptor address */ - + /* * This stuff is for maintenance of the ring */ - + sbdmadscr_t *sbdma_dscrtable; /* base of descriptor table */ sbdmadscr_t *sbdma_dscrtable_end; /* end of descriptor table */ - + struct sk_buff **sbdma_ctxtable; /* context table, one per descr */ - + paddr_t sbdma_dscrtable_phys; /* and also the phys addr */ sbdmadscr_t *sbdma_addptr; /* next dscr for sw to add */ sbdmadscr_t *sbdma_remptr; /* next dscr for sw to remove */ @@ -207,15 +207,15 @@ typedef struct sbmacdma_s { ********************************************************************* */ struct sbmac_softc { - + /* * Linux-specific things */ - + struct net_device *sbm_dev; /* pointer to linux device */ spinlock_t sbm_lock; /* spin lock */ struct timer_list sbm_timer; /* for monitoring MII */ - struct net_device_stats sbm_stats; + struct net_device_stats sbm_stats; int sbm_devflags; /* current device flags */ int sbm_phy_oldbmsr; @@ -223,16 +223,16 @@ struct sbmac_softc { int sbm_phy_oldk1stsr; int sbm_phy_oldlinkstat; int sbm_buffersize; - + unsigned char sbm_phys[2]; - + /* * Controller-specific things */ - + volatile void __iomem *sbm_base; /* MAC's base address */ sbmac_state_t sbm_state; /* current state */ - + volatile void __iomem *sbm_macenable; /* MAC Enable Register */ volatile void __iomem *sbm_maccfg; /* MAC Configuration Register */ volatile void __iomem *sbm_fifocfg; /* FIFO configuration register */ @@ -241,13 +241,13 @@ struct sbmac_softc { volatile void __iomem *sbm_isr; /* Interrupt status register */ volatile void __iomem *sbm_imr; /* Interrupt mask register */ volatile void __iomem *sbm_mdio; /* MDIO register */ - + sbmac_speed_t sbm_speed; /* current speed */ sbmac_duplex_t sbm_duplex; /* current duplex */ sbmac_fc_t sbm_fc; /* current flow control setting */ - + unsigned char sbm_hwaddr[ETHER_ADDR_LEN]; - + sbmacdma_t sbm_txdma; /* for now, only use channel 0 */ sbmacdma_t sbm_rxdma; int rx_hw_checksum; @@ -444,13 +444,13 @@ static uint64_t sbmac_orig_hwaddr[MAX_UNITS]; /********************************************************************** * SBMAC_MII_SYNC(s) - * + * * Synchronize with the MII - send a pattern of bits to the MII * that will guarantee that it is ready to accept a command. - * - * Input parameters: + * + * Input parameters: * s - sbmac structure - * + * * Return value: * nothing ********************************************************************* */ @@ -462,11 +462,11 @@ static void sbmac_mii_sync(struct sbmac_softc *s) int mac_mdio_genc; mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC; - + bits = M_MAC_MDIO_DIR_OUTPUT | M_MAC_MDIO_OUT; - + __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio); - + for (cnt = 0; cnt < 32; cnt++) { __raw_writeq(bits | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio); __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio); @@ -475,11 +475,11 @@ static void sbmac_mii_sync(struct sbmac_softc *s) /********************************************************************** * SBMAC_MII_SENDDATA(s,data,bitcnt) - * + * * Send some bits to the MII. The bits to be sent are right- * justified in the 'data' parameter. - * - * Input parameters: + * + * Input parameters: * s - sbmac structure * data - data to send * bitcnt - number of bits to send @@ -493,12 +493,12 @@ static void sbmac_mii_senddata(struct sbmac_softc *s,unsigned int data, int bitc int mac_mdio_genc; mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC; - + bits = M_MAC_MDIO_DIR_OUTPUT; __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio); - + curmask = 1 << (bitcnt - 1); - + for (i = 0; i < bitcnt; i++) { if (data & curmask) bits |= M_MAC_MDIO_OUT; @@ -514,14 +514,14 @@ static void sbmac_mii_senddata(struct sbmac_softc *s,unsigned int data, int bitc /********************************************************************** * SBMAC_MII_READ(s,phyaddr,regidx) - * + * * Read a PHY register. - * - * Input parameters: + * + * Input parameters: * s - sbmac structure * phyaddr - PHY's address * regidx = index of register to read - * + * * Return value: * value read, or 0 if an error occurred. ********************************************************************* */ @@ -537,9 +537,9 @@ static unsigned int sbmac_mii_read(struct sbmac_softc *s,int phyaddr,int regidx) * Synchronize ourselves so that the PHY knows the next * thing coming down is a command */ - + sbmac_mii_sync(s); - + /* * Send the data to the PHY. The sequence is * a "start" command (2 bits) @@ -547,55 +547,55 @@ static unsigned int sbmac_mii_read(struct sbmac_softc *s,int phyaddr,int regidx) * the PHY addr (5 bits) * the register index (5 bits) */ - + sbmac_mii_senddata(s,MII_COMMAND_START, 2); sbmac_mii_senddata(s,MII_COMMAND_READ, 2); sbmac_mii_senddata(s,phyaddr, 5); sbmac_mii_senddata(s,regidx, 5); - + mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC; - - /* + + /* * Switch the port around without a clock transition. */ __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio); - + /* * Send out a clock pulse to signal we want the status */ - + __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio); __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio); - - /* + + /* * If an error occurred, the PHY will signal '1' back */ error = __raw_readq(s->sbm_mdio) & M_MAC_MDIO_IN; - - /* + + /* * Issue an 'idle' clock pulse, but keep the direction * the same. */ __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio); __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio); - + regval = 0; - + for (idx = 0; idx < 16; idx++) { regval <<= 1; - + if (error == 0) { if (__raw_readq(s->sbm_mdio) & M_MAC_MDIO_IN) regval |= 1; } - + __raw_writeq(M_MAC_MDIO_DIR_INPUT|M_MAC_MDC | mac_mdio_genc, s->sbm_mdio); __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio); } - + /* Switch back to output */ __raw_writeq(M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc, s->sbm_mdio); - + if (error == 0) return regval; return 0; @@ -604,15 +604,15 @@ static unsigned int sbmac_mii_read(struct sbmac_softc *s,int phyaddr,int regidx) /********************************************************************** * SBMAC_MII_WRITE(s,phyaddr,regidx,regval) - * + * * Write a value to a PHY register. - * - * Input parameters: + * + * Input parameters: * s - sbmac structure * phyaddr - PHY to use * regidx - register within the PHY * regval - data to write to register - * + * * Return value: * nothing ********************************************************************* */ @@ -623,7 +623,7 @@ static void sbmac_mii_write(struct sbmac_softc *s,int phyaddr,int regidx, int mac_mdio_genc; sbmac_mii_sync(s); - + sbmac_mii_senddata(s,MII_COMMAND_START,2); sbmac_mii_senddata(s,MII_COMMAND_WRITE,2); sbmac_mii_senddata(s,phyaddr, 5); @@ -640,18 +640,18 @@ static void sbmac_mii_write(struct sbmac_softc *s,int phyaddr,int regidx, /********************************************************************** * SBDMA_INITCTX(d,s,chan,txrx,maxdescr) - * + * * Initialize a DMA channel context. Since there are potentially * eight DMA channels per MAC, it's nice to do this in a standard - * way. - * - * Input parameters: + * way. + * + * Input parameters: * d - sbmacdma_t structure (DMA channel context) * s - sbmac_softc structure (pointer to a MAC) * chan - channel number (0..1 right now) * txrx - Identifies DMA_TX or DMA_RX for channel direction * maxdescr - number of descriptors - * + * * Return value: * nothing ********************************************************************* */ @@ -662,14 +662,14 @@ static void sbdma_initctx(sbmacdma_t *d, int txrx, int maxdescr) { - /* - * Save away interesting stuff in the structure + /* + * Save away interesting stuff in the structure */ - + d->sbdma_eth = s; d->sbdma_channel = chan; d->sbdma_txdir = txrx; - + #if 0 /* RMON clearing */ s->sbe_idx =(s->sbm_base - A_MAC_BASE_0)/MAC_SPACING; @@ -697,28 +697,28 @@ static void sbdma_initctx(sbmacdma_t *d, __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_CODE_ERROR))); __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_ALIGN_ERROR))); - /* - * initialize register pointers + /* + * initialize register pointers */ - - d->sbdma_config0 = + + d->sbdma_config0 = s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CONFIG0); - d->sbdma_config1 = + d->sbdma_config1 = s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CONFIG1); - d->sbdma_dscrbase = + d->sbdma_dscrbase = s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_DSCR_BASE); - d->sbdma_dscrcnt = + d->sbdma_dscrcnt = s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_DSCR_CNT); - d->sbdma_curdscr = + d->sbdma_curdscr = s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CUR_DSCRADDR); - + /* * Allocate memory for the ring */ - + d->sbdma_maxdescr = maxdescr; - - d->sbdma_dscrtable = (sbdmadscr_t *) + + d->sbdma_dscrtable = (sbdmadscr_t *) kmalloc((d->sbdma_maxdescr+1)*sizeof(sbdmadscr_t), GFP_KERNEL); /* @@ -727,22 +727,22 @@ static void sbdma_initctx(sbmacdma_t *d, */ d->sbdma_dscrtable = (sbdmadscr_t *) ALIGN((unsigned long)d->sbdma_dscrtable, sizeof(sbdmadscr_t)); - + memset(d->sbdma_dscrtable,0,d->sbdma_maxdescr*sizeof(sbdmadscr_t)); - + d->sbdma_dscrtable_end = d->sbdma_dscrtable + d->sbdma_maxdescr; - + d->sbdma_dscrtable_phys = virt_to_phys(d->sbdma_dscrtable); - + /* * And context table */ - - d->sbdma_ctxtable = (struct sk_buff **) + + d->sbdma_ctxtable = (struct sk_buff **) kmalloc(d->sbdma_maxdescr*sizeof(struct sk_buff *), GFP_KERNEL); - + memset(d->sbdma_ctxtable,0,d->sbdma_maxdescr*sizeof(struct sk_buff *)); - + #ifdef CONFIG_SBMAC_COALESCE /* * Setup Rx/Tx DMA coalescing defaults @@ -753,7 +753,7 @@ static void sbdma_initctx(sbmacdma_t *d, } else { d->sbdma_int_pktcnt = 1; } - + if ( int_timeout ) { d->sbdma_int_timeout = int_timeout; } else { @@ -765,13 +765,13 @@ static void sbdma_initctx(sbmacdma_t *d, /********************************************************************** * SBDMA_CHANNEL_START(d) - * + * * Initialize the hardware registers for a DMA channel. - * - * Input parameters: + * + * Input parameters: * d - DMA channel to init (context must be previously init'd * rxtx - DMA_RX or DMA_TX depending on what type of channel - * + * * Return value: * nothing ********************************************************************* */ @@ -781,7 +781,7 @@ static void sbdma_channel_start(sbmacdma_t *d, int rxtx ) /* * Turn on the DMA channel */ - + #ifdef CONFIG_SBMAC_COALESCE __raw_writeq(V_DMA_INT_TIMEOUT(d->sbdma_int_timeout) | 0, d->sbdma_config1); @@ -807,12 +807,12 @@ static void sbdma_channel_start(sbmacdma_t *d, int rxtx ) /********************************************************************** * SBDMA_CHANNEL_STOP(d) - * + * * Initialize the hardware registers for a DMA channel. - * - * Input parameters: + * + * Input parameters: * d - DMA channel to init (context must be previously init'd - * + * * Return value: * nothing ********************************************************************* */ @@ -822,17 +822,17 @@ static void sbdma_channel_stop(sbmacdma_t *d) /* * Turn off the DMA channel */ - + __raw_writeq(0, d->sbdma_config1); - + __raw_writeq(0, d->sbdma_dscrbase); - + __raw_writeq(0, d->sbdma_config0); - + /* * Zero ring pointers */ - + d->sbdma_addptr = NULL; d->sbdma_remptr = NULL; } @@ -841,25 +841,25 @@ static void sbdma_align_skb(struct sk_buff *skb,int power2,int offset) { unsigned long addr; unsigned long newaddr; - + addr = (unsigned long) skb->data; - + newaddr = (addr + power2 - 1) & ~(power2 - 1); - + skb_reserve(skb,newaddr-addr+offset); } /********************************************************************** * SBDMA_ADD_RCVBUFFER(d,sb) - * + * * Add a buffer to the specified DMA channel. For receive channels, * this queues a buffer for inbound packets. - * - * Input parameters: + * + * Input parameters: * d - DMA channel descriptor * sb - sk_buff to add, or NULL if we should allocate one - * + * * Return value: * 0 if buffer could not be added (ring is full) * 1 if buffer added successfully @@ -872,24 +872,24 @@ static int sbdma_add_rcvbuffer(sbmacdma_t *d,struct sk_buff *sb) sbdmadscr_t *nextdsc; struct sk_buff *sb_new = NULL; int pktsize = ENET_PACKET_SIZE; - + /* get pointer to our current place in the ring */ - + dsc = d->sbdma_addptr; nextdsc = SBDMA_NEXTBUF(d,sbdma_addptr); - + /* * figure out if the ring is full - if the next descriptor * is the same as the one that we're going to remove from * the ring, the ring is full */ - + if (nextdsc == d->sbdma_remptr) { return -ENOSPC; } - /* - * Allocate a sk_buff if we don't already have one. + /* + * Allocate a sk_buff if we don't already have one. * If we do have an sk_buff, reset it so that it's empty. * * Note: sk_buffs don't seem to be guaranteed to have any sort @@ -898,7 +898,7 @@ static int sbdma_add_rcvbuffer(sbmacdma_t *d,struct sk_buff *sb) * * 1. the data does not start in the middle of a cache line. * 2. The data does not end in the middle of a cache line - * 3. The buffer can be aligned such that the IP addresses are + * 3. The buffer can be aligned such that the IP addresses are * naturally aligned. * * Remember, the SOCs MAC writes whole cache lines at a time, @@ -906,7 +906,7 @@ static int sbdma_add_rcvbuffer(sbmacdma_t *d,struct sk_buff *sb) * data portion starts in the middle of a cache line, the SOC * DMA will trash the beginning (and ending) portions. */ - + if (sb == NULL) { sb_new = dev_alloc_skb(ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN); if (sb_new == NULL) { @@ -922,16 +922,16 @@ static int sbdma_add_rcvbuffer(sbmacdma_t *d,struct sk_buff *sb) } else { sb_new = sb; - /* + /* * nothing special to reinit buffer, it's already aligned * and sb->data already points to a good place. */ } - + /* - * fill in the descriptor + * fill in the descriptor */ - + #ifdef CONFIG_SBMAC_COALESCE /* * Do not interrupt per DMA transfer. @@ -946,38 +946,38 @@ static int sbdma_add_rcvbuffer(sbmacdma_t *d,struct sk_buff *sb) /* receiving: no options */ dsc->dscr_b = 0; - + /* - * fill in the context + * fill in the context */ - + d->sbdma_ctxtable[dsc-d->sbdma_dscrtable] = sb_new; - - /* - * point at next packet + + /* + * point at next packet */ - + d->sbdma_addptr = nextdsc; - - /* + + /* * Give the buffer to the DMA engine. */ - + __raw_writeq(1, d->sbdma_dscrcnt); - + return 0; /* we did it */ } /********************************************************************** * SBDMA_ADD_TXBUFFER(d,sb) - * + * * Add a transmit buffer to the specified DMA channel, causing a * transmit to start. - * - * Input parameters: + * + * Input parameters: * d - DMA channel descriptor * sb - sk_buff to add - * + * * Return value: * 0 transmit queued successfully * otherwise error code @@ -991,70 +991,70 @@ static int sbdma_add_txbuffer(sbmacdma_t *d,struct sk_buff *sb) uint64_t phys; uint64_t ncb; int length; - + /* get pointer to our current place in the ring */ - + dsc = d->sbdma_addptr; nextdsc = SBDMA_NEXTBUF(d,sbdma_addptr); - + /* * figure out if the ring is full - if the next descriptor * is the same as the one that we're going to remove from * the ring, the ring is full */ - + if (nextdsc == d->sbdma_remptr) { return -ENOSPC; } - + /* * Under Linux, it's not necessary to copy/coalesce buffers * like it is on NetBSD. We think they're all contiguous, * but that may not be true for GBE. */ - + length = sb->len; - + /* * fill in the descriptor. Note that the number of cache * blocks in the descriptor is the number of blocks * *spanned*, so we need to add in the offset (if any) * while doing the calculation. */ - + phys = virt_to_phys(sb->data); ncb = NUMCACHEBLKS(length+(phys & (SMP_CACHE_BYTES - 1))); - dsc->dscr_a = phys | + dsc->dscr_a = phys | V_DMA_DSCRA_A_SIZE(ncb) | #ifndef CONFIG_SBMAC_COALESCE M_DMA_DSCRA_INTERRUPT | #endif M_DMA_ETHTX_SOP; - + /* transmitting: set outbound options and length */ dsc->dscr_b = V_DMA_DSCRB_OPTIONS(K_DMA_ETHTX_APPENDCRC_APPENDPAD) | V_DMA_DSCRB_PKT_SIZE(length); - + /* - * fill in the context + * fill in the context */ - + d->sbdma_ctxtable[dsc-d->sbdma_dscrtable] = sb; - - /* - * point at next packet + + /* + * point at next packet */ - + d->sbdma_addptr = nextdsc; - - /* + + /* * Give the buffer to the DMA engine. */ - + __raw_writeq(1, d->sbdma_dscrcnt); - + return 0; /* we did it */ } @@ -1063,12 +1063,12 @@ static int sbdma_add_txbuffer(sbmacdma_t *d,struct sk_buff *sb) /********************************************************************** * SBDMA_EMPTYRING(d) - * + * * Free all allocated sk_buffs on the specified DMA channel; - * - * Input parameters: + * + * Input parameters: * d - DMA channel - * + * * Return value: * nothing ********************************************************************* */ @@ -1077,7 +1077,7 @@ static void sbdma_emptyring(sbmacdma_t *d) { int idx; struct sk_buff *sb; - + for (idx = 0; idx < d->sbdma_maxdescr; idx++) { sb = d->sbdma_ctxtable[idx]; if (sb) { @@ -1090,13 +1090,13 @@ static void sbdma_emptyring(sbmacdma_t *d) /********************************************************************** * SBDMA_FILLRING(d) - * + * * Fill the specified DMA channel (must be receive channel) * with sk_buffs - * - * Input parameters: + * + * Input parameters: * d - DMA channel - * + * * Return value: * nothing ********************************************************************* */ @@ -1104,7 +1104,7 @@ static void sbdma_emptyring(sbmacdma_t *d) static void sbdma_fillring(sbmacdma_t *d) { int idx; - + for (idx = 0; idx < SBMAC_MAX_RXDESCR-1; idx++) { if (sbdma_add_rcvbuffer(d,NULL) != 0) break; @@ -1114,16 +1114,16 @@ static void sbdma_fillring(sbmacdma_t *d) /********************************************************************** * SBDMA_RX_PROCESS(sc,d) - * - * Process "completed" receive buffers on the specified DMA channel. + * + * Process "completed" receive buffers on the specified DMA channel. * Note that this isn't really ideal for priority channels, since - * it processes all of the packets on a given channel before - * returning. + * it processes all of the packets on a given channel before + * returning. * - * Input parameters: + * Input parameters: * sc - softc structure * d - DMA channel context - * + * * Return value: * nothing ********************************************************************* */ @@ -1135,56 +1135,56 @@ static void sbdma_rx_process(struct sbmac_softc *sc,sbmacdma_t *d) sbdmadscr_t *dsc; struct sk_buff *sb; int len; - + for (;;) { - /* + /* * figure out where we are (as an index) and where * the hardware is (also as an index) * - * This could be done faster if (for example) the + * This could be done faster if (for example) the * descriptor table was page-aligned and contiguous in * both virtual and physical memory -- you could then * just compare the low-order bits of the virtual address * (sbdma_remptr) and the physical address (sbdma_curdscr CSR) */ - + curidx = d->sbdma_remptr - d->sbdma_dscrtable; hwidx = (int) (((__raw_readq(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) - d->sbdma_dscrtable_phys) / sizeof(sbdmadscr_t)); - + /* * If they're the same, that means we've processed all * of the descriptors up to (but not including) the one that * the hardware is working on right now. */ - + if (curidx == hwidx) break; - + /* * Otherwise, get the packet's sk_buff ptr back */ - + dsc = &(d->sbdma_dscrtable[curidx]); sb = d->sbdma_ctxtable[curidx]; d->sbdma_ctxtable[curidx] = NULL; - + len = (int)G_DMA_DSCRB_PKT_SIZE(dsc->dscr_b) - 4; - + /* * Check packet status. If good, process it. * If not, silently drop it and put it back on the * receive ring. */ - + if (!(dsc->dscr_a & M_DMA_ETHRX_BAD)) { - + /* * Add a new buffer to replace the old one. If we fail * to allocate a buffer, we're going to drop this * packet and put it right back on the receive ring. */ - + if (sbdma_add_rcvbuffer(d,NULL) == -ENOBUFS) { sc->sbm_stats.rx_dropped++; sbdma_add_rcvbuffer(d,sb); /* re-add old buffer */ @@ -1193,7 +1193,7 @@ static void sbdma_rx_process(struct sbmac_softc *sc,sbmacdma_t *d) * Set length into the packet */ skb_put(sb,len); - + /* * Buffer has been replaced on the * receive ring. Pass the buffer to @@ -1212,7 +1212,7 @@ static void sbdma_rx_process(struct sbmac_softc *sc,sbmacdma_t *d) sb->ip_summed = CHECKSUM_NONE; } } - + netif_rx(sb); } } else { @@ -1223,14 +1223,14 @@ static void sbdma_rx_process(struct sbmac_softc *sc,sbmacdma_t *d) sc->sbm_stats.rx_errors++; sbdma_add_rcvbuffer(d,sb); } - - - /* + + + /* * .. and advance to the next buffer. */ - + d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr); - + } } @@ -1238,17 +1238,17 @@ static void sbdma_rx_process(struct sbmac_softc *sc,sbmacdma_t *d) /********************************************************************** * SBDMA_TX_PROCESS(sc,d) - * - * Process "completed" transmit buffers on the specified DMA channel. + * + * Process "completed" transmit buffers on the specified DMA channel. * This is normally called within the interrupt service routine. * Note that this isn't really ideal for priority channels, since - * it processes all of the packets on a given channel before - * returning. + * it processes all of the packets on a given channel before + * returning. * - * Input parameters: + * Input parameters: * sc - softc structure * d - DMA channel context - * + * * Return value: * nothing ********************************************************************* */ @@ -1262,19 +1262,19 @@ static void sbdma_tx_process(struct sbmac_softc *sc,sbmacdma_t *d) unsigned long flags; spin_lock_irqsave(&(sc->sbm_lock), flags); - + for (;;) { - /* + /* * figure out where we are (as an index) and where * the hardware is (also as an index) * - * This could be done faster if (for example) the + * This could be done faster if (for example) the * descriptor table was page-aligned and contiguous in * both virtual and physical memory -- you could then * just compare the low-order bits of the virtual address * (sbdma_remptr) and the physical address (sbdma_curdscr CSR) */ - + curidx = d->sbdma_remptr - d->sbdma_dscrtable; hwidx = (int) (((__raw_readq(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) - d->sbdma_dscrtable_phys) / sizeof(sbdmadscr_t)); @@ -1284,75 +1284,75 @@ static void sbdma_tx_process(struct sbmac_softc *sc,sbmacdma_t *d) * of the descriptors up to (but not including) the one that * the hardware is working on right now. */ - + if (curidx == hwidx) break; - + /* * Otherwise, get the packet's sk_buff ptr back */ - + dsc = &(d->sbdma_dscrtable[curidx]); sb = d->sbdma_ctxtable[curidx]; d->sbdma_ctxtable[curidx] = NULL; - + /* * Stats */ - + sc->sbm_stats.tx_bytes += sb->len; sc->sbm_stats.tx_packets++; - + /* * for transmits, we just free buffers. */ - + dev_kfree_skb_irq(sb); - - /* + + /* * .. and advance to the next buffer. */ d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr); - + } - + /* * Decide if we should wake up the protocol or not. * Other drivers seem to do this when we reach a low * watermark on the transmit queue. */ - + netif_wake_queue(d->sbdma_eth->sbm_dev); - + spin_unlock_irqrestore(&(sc->sbm_lock), flags); - + } /********************************************************************** * SBMAC_INITCTX(s) - * + * * Initialize an Ethernet context structure - this is called * once per MAC on the 1250. Memory is allocated here, so don't * call it again from inside the ioctl routines that bring the * interface up/down - * - * Input parameters: + * + * Input parameters: * s - sbmac context structure - * + * * Return value: * 0 ********************************************************************* */ static int sbmac_initctx(struct sbmac_softc *s) { - - /* - * figure out the addresses of some ports + + /* + * figure out the addresses of some ports */ - + s->sbm_macenable = s->sbm_base + R_MAC_ENABLE; s->sbm_maccfg = s->sbm_base + R_MAC_CFG; s->sbm_fifocfg = s->sbm_base + R_MAC_THRSH_CFG; @@ -1369,29 +1369,29 @@ static int sbmac_initctx(struct sbmac_softc *s) s->sbm_phy_oldanlpar = 0; s->sbm_phy_oldk1stsr = 0; s->sbm_phy_oldlinkstat = 0; - + /* * Initialize the DMA channels. Right now, only one per MAC is used * Note: Only do this _once_, as it allocates memory from the kernel! */ - + sbdma_initctx(&(s->sbm_txdma),s,0,DMA_TX,SBMAC_MAX_TXDESCR); sbdma_initctx(&(s->sbm_rxdma),s,0,DMA_RX,SBMAC_MAX_RXDESCR); - + /* * initial state is OFF */ - + s->sbm_state = sbmac_state_off; - + /* * Initial speed is (XXX TEMP) 10MBit/s HDX no FC */ - + s->sbm_speed = sbmac_speed_10; s->sbm_duplex = sbmac_duplex_half; s->sbm_fc = sbmac_fc_disabled; - + return 0; } @@ -1402,7 +1402,7 @@ static void sbdma_uninitctx(struct sbmacdma_s *d) kfree(d->sbdma_dscrtable); d->sbdma_dscrtable = NULL; } - + if (d->sbdma_ctxtable) { kfree(d->sbdma_ctxtable); d->sbdma_ctxtable = NULL; @@ -1419,12 +1419,12 @@ static void sbmac_uninitctx(struct sbmac_softc *sc) /********************************************************************** * SBMAC_CHANNEL_START(s) - * + * * Start packet processing on this MAC. - * - * Input parameters: + * + * Input parameters: * s - sbmac structure - * + * * Return value: * nothing ********************************************************************* */ @@ -1435,46 +1435,46 @@ static void sbmac_channel_start(struct sbmac_softc *s) volatile void __iomem *port; uint64_t cfg,fifo,framecfg; int idx, th_value; - + /* * Don't do this if running */ if (s->sbm_state == sbmac_state_on) return; - + /* * Bring the controller out of reset, but leave it off. */ - + __raw_writeq(0, s->sbm_macenable); - + /* * Ignore all received packets */ - + __raw_writeq(0, s->sbm_rxfilter); - - /* + + /* * Calculate values for various control registers. */ - + cfg = M_MAC_RETRY_EN | - M_MAC_TX_HOLD_SOP_EN | + M_MAC_TX_HOLD_SOP_EN | V_MAC_TX_PAUSE_CNT_16K | M_MAC_AP_STAT_EN | M_MAC_FAST_SYNC | M_MAC_SS_EN | 0; - - /* + + /* * Be sure that RD_THRSH+WR_THRSH <= 32 for pass1 pars * and make sure that RD_THRSH + WR_THRSH <=128 for pass2 and above * Use a larger RD_THRSH for gigabit */ - if (periph_rev >= 2) + if (periph_rev >= 2) th_value = 64; - else + else th_value = 28; fifo = V_MAC_TX_WR_THRSH(4) | /* Must be '4' or '8' */ @@ -1492,29 +1492,29 @@ static void sbmac_channel_start(struct sbmac_softc *s) V_MAC_BACKOFF_SEL(1); /* - * Clear out the hash address map + * Clear out the hash address map */ - + port = s->sbm_base + R_MAC_HASH_BASE; for (idx = 0; idx < MAC_HASH_COUNT; idx++) { __raw_writeq(0, port); port += sizeof(uint64_t); } - + /* * Clear out the exact-match table */ - + port = s->sbm_base + R_MAC_ADDR_BASE; for (idx = 0; idx < MAC_ADDR_COUNT; idx++) { __raw_writeq(0, port); port += sizeof(uint64_t); } - + /* * Clear out the DMA Channel mapping table registers */ - + port = s->sbm_base + R_MAC_CHUP0_BASE; for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) { __raw_writeq(0, port); @@ -1527,14 +1527,14 @@ static void sbmac_channel_start(struct sbmac_softc *s) __raw_writeq(0, port); port += sizeof(uint64_t); } - + /* * Program the hardware address. It goes into the hardware-address * register as well as the first filter register. */ - + reg = sbmac_addr2reg(s->sbm_hwaddr); - + port = s->sbm_base + R_MAC_ADDR_BASE; __raw_writeq(reg, port); port = s->sbm_base + R_MAC_ETHERNET_ADDR; @@ -1549,48 +1549,48 @@ static void sbmac_channel_start(struct sbmac_softc *s) #else __raw_writeq(reg, port); #endif - + /* * Set the receive filter for no packets, and write values * to the various config registers */ - + __raw_writeq(0, s->sbm_rxfilter); __raw_writeq(0, s->sbm_imr); __raw_writeq(framecfg, s->sbm_framecfg); __raw_writeq(fifo, s->sbm_fifocfg); __raw_writeq(cfg, s->sbm_maccfg); - + /* * Initialize DMA channels (rings should be ok now) */ - + sbdma_channel_start(&(s->sbm_rxdma), DMA_RX); sbdma_channel_start(&(s->sbm_txdma), DMA_TX); - + /* * Configure the speed, duplex, and flow control */ sbmac_set_speed(s,s->sbm_speed); sbmac_set_duplex(s,s->sbm_duplex,s->sbm_fc); - + /* * Fill the receive ring */ - + sbdma_fillring(&(s->sbm_rxdma)); - - /* + + /* * Turn on the rest of the bits in the enable register - */ - + */ + __raw_writeq(M_MAC_RXDMA_EN0 | M_MAC_TXDMA_EN0 | M_MAC_RX_ENABLE | M_MAC_TX_ENABLE, s->sbm_macenable); - - + + #ifdef CONFIG_SBMAC_COALESCE @@ -1606,44 +1606,44 @@ static void sbmac_channel_start(struct sbmac_softc *s) __raw_writeq((M_MAC_INT_CHANNEL << S_MAC_TX_CH0) | (M_MAC_INT_CHANNEL << S_MAC_RX_CH0), s->sbm_imr); #endif - - /* - * Enable receiving unicasts and broadcasts + + /* + * Enable receiving unicasts and broadcasts */ - + __raw_writeq(M_MAC_UCAST_EN | M_MAC_BCAST_EN, s->sbm_rxfilter); - + /* - * we're running now. + * we're running now. */ - + s->sbm_state = sbmac_state_on; - - /* - * Program multicast addresses + + /* + * Program multicast addresses */ - + sbmac_setmulti(s); - - /* - * If channel was in promiscuous mode before, turn that on + + /* + * If channel was in promiscuous mode before, turn that on */ - + if (s->sbm_devflags & IFF_PROMISC) { sbmac_promiscuous_mode(s,1); } - + } /********************************************************************** * SBMAC_CHANNEL_STOP(s) - * + * * Stop packet processing on this MAC. - * - * Input parameters: + * + * Input parameters: * s - sbmac structure - * + * * Return value: * nothing ********************************************************************* */ @@ -1651,49 +1651,49 @@ static void sbmac_channel_start(struct sbmac_softc *s) static void sbmac_channel_stop(struct sbmac_softc *s) { /* don't do this if already stopped */ - + if (s->sbm_state == sbmac_state_off) return; - + /* don't accept any packets, disable all interrupts */ - + __raw_writeq(0, s->sbm_rxfilter); __raw_writeq(0, s->sbm_imr); - + /* Turn off ticker */ - + /* XXX */ - + /* turn off receiver and transmitter */ - + __raw_writeq(0, s->sbm_macenable); - + /* We're stopped now. */ - + s->sbm_state = sbmac_state_off; - + /* * Stop DMA channels (rings should be ok now) */ - + sbdma_channel_stop(&(s->sbm_rxdma)); sbdma_channel_stop(&(s->sbm_txdma)); - + /* Empty the receive and transmit rings */ - + sbdma_emptyring(&(s->sbm_rxdma)); sbdma_emptyring(&(s->sbm_txdma)); - + } /********************************************************************** * SBMAC_SET_CHANNEL_STATE(state) - * + * * Set the channel's state ON or OFF - * - * Input parameters: + * + * Input parameters: * state - new state - * + * * Return value: * old state ********************************************************************* */ @@ -1701,43 +1701,43 @@ static sbmac_state_t sbmac_set_channel_state(struct sbmac_softc *sc, sbmac_state_t state) { sbmac_state_t oldstate = sc->sbm_state; - + /* * If same as previous state, return */ - + if (state == oldstate) { return oldstate; } - + /* - * If new state is ON, turn channel on + * If new state is ON, turn channel on */ - + if (state == sbmac_state_on) { sbmac_channel_start(sc); } else { sbmac_channel_stop(sc); } - + /* * Return previous state */ - + return oldstate; } /********************************************************************** * SBMAC_PROMISCUOUS_MODE(sc,onoff) - * + * * Turn on or off promiscuous mode - * - * Input parameters: + * + * Input parameters: * sc - softc * onoff - 1 to turn on, 0 to turn off - * + * * Return value: * nothing ********************************************************************* */ @@ -1745,15 +1745,15 @@ static sbmac_state_t sbmac_set_channel_state(struct sbmac_softc *sc, static void sbmac_promiscuous_mode(struct sbmac_softc *sc,int onoff) { uint64_t reg; - + if (sc->sbm_state != sbmac_state_on) return; - + if (onoff) { reg = __raw_readq(sc->sbm_rxfilter); reg |= M_MAC_ALLPKT_EN; __raw_writeq(reg, sc->sbm_rxfilter); - } + } else { reg = __raw_readq(sc->sbm_rxfilter); reg &= ~M_MAC_ALLPKT_EN; @@ -1763,12 +1763,12 @@ static void sbmac_promiscuous_mode(struct sbmac_softc *sc,int onoff) /********************************************************************** * SBMAC_SETIPHDR_OFFSET(sc,onoff) - * + * * Set the iphdr offset as 15 assuming ethernet encapsulation - * - * Input parameters: + * + * Input parameters: * sc - softc - * + * * Return value: * nothing ********************************************************************* */ @@ -1776,12 +1776,12 @@ static void sbmac_promiscuous_mode(struct sbmac_softc *sc,int onoff) static void sbmac_set_iphdr_offset(struct sbmac_softc *sc) { uint64_t reg; - + /* Hard code the off set to 15 for now */ reg = __raw_readq(sc->sbm_rxfilter); reg &= ~M_MAC_IPHDR_OFFSET | V_MAC_IPHDR_OFFSET(15); __raw_writeq(reg, sc->sbm_rxfilter); - + /* read system identification to determine revision */ if (periph_rev >= 2) { sc->rx_hw_checksum = ENABLE; @@ -1793,13 +1793,13 @@ static void sbmac_set_iphdr_offset(struct sbmac_softc *sc) /********************************************************************** * SBMAC_ADDR2REG(ptr) - * + * * Convert six bytes into the 64-bit register value that * we typically write into the SBMAC's address/mcast registers - * - * Input parameters: + * + * Input parameters: * ptr - pointer to 6 bytes - * + * * Return value: * register value ********************************************************************* */ @@ -1807,35 +1807,35 @@ static void sbmac_set_iphdr_offset(struct sbmac_softc *sc) static uint64_t sbmac_addr2reg(unsigned char *ptr) { uint64_t reg = 0; - + ptr += 6; - - reg |= (uint64_t) *(--ptr); + + reg |= (uint64_t) *(--ptr); reg <<= 8; - reg |= (uint64_t) *(--ptr); + reg |= (uint64_t) *(--ptr); reg <<= 8; - reg |= (uint64_t) *(--ptr); + reg |= (uint64_t) *(--ptr); reg <<= 8; - reg |= (uint64_t) *(--ptr); + reg |= (uint64_t) *(--ptr); reg <<= 8; - reg |= (uint64_t) *(--ptr); + reg |= (uint64_t) *(--ptr); reg <<= 8; - reg |= (uint64_t) *(--ptr); - + reg |= (uint64_t) *(--ptr); + return reg; } /********************************************************************** * SBMAC_SET_SPEED(s,speed) - * + * * Configure LAN speed for the specified MAC. * Warning: must be called when MAC is off! - * - * Input parameters: + * + * Input parameters: * s - sbmac structure * speed - speed to set MAC to (see sbmac_speed_t enum) - * + * * Return value: * 1 if successful * 0 indicates invalid parameters @@ -1849,31 +1849,31 @@ static int sbmac_set_speed(struct sbmac_softc *s,sbmac_speed_t speed) /* * Save new current values */ - + s->sbm_speed = speed; - + if (s->sbm_state == sbmac_state_on) return 0; /* save for next restart */ /* - * Read current register values + * Read current register values */ - + cfg = __raw_readq(s->sbm_maccfg); framecfg = __raw_readq(s->sbm_framecfg); - + /* * Mask out the stuff we want to change */ - + cfg &= ~(M_MAC_BURST_EN | M_MAC_SPEED_SEL); framecfg &= ~(M_MAC_IFG_RX | M_MAC_IFG_TX | M_MAC_IFG_THRSH | M_MAC_SLOT_SIZE); - + /* * Now add in the new bits */ - + switch (speed) { case sbmac_speed_10: framecfg |= V_MAC_IFG_RX_10 | @@ -1882,7 +1882,7 @@ static int sbmac_set_speed(struct sbmac_softc *s,sbmac_speed_t speed) V_MAC_SLOT_SIZE_10; cfg |= V_MAC_SPEED_SEL_10MBPS; break; - + case sbmac_speed_100: framecfg |= V_MAC_IFG_RX_100 | V_MAC_IFG_TX_100 | @@ -1890,7 +1890,7 @@ static int sbmac_set_speed(struct sbmac_softc *s,sbmac_speed_t speed) V_MAC_SLOT_SIZE_100; cfg |= V_MAC_SPEED_SEL_100MBPS ; break; - + case sbmac_speed_1000: framecfg |= V_MAC_IFG_RX_1000 | V_MAC_IFG_TX_1000 | @@ -1898,34 +1898,34 @@ static int sbmac_set_speed(struct sbmac_softc *s,sbmac_speed_t speed) V_MAC_SLOT_SIZE_1000; cfg |= V_MAC_SPEED_SEL_1000MBPS | M_MAC_BURST_EN; break; - + case sbmac_speed_auto: /* XXX not implemented */ /* fall through */ default: return 0; } - + /* - * Send the bits back to the hardware + * Send the bits back to the hardware */ - + __raw_writeq(framecfg, s->sbm_framecfg); __raw_writeq(cfg, s->sbm_maccfg); - + return 1; } /********************************************************************** * SBMAC_SET_DUPLEX(s,duplex,fc) - * + * * Set Ethernet duplex and flow control options for this MAC * Warning: must be called when MAC is off! - * - * Input parameters: + * + * Input parameters: * s - sbmac structure * duplex - duplex setting (see sbmac_duplex_t) * fc - flow control setting (see sbmac_fc_t) - * + * * Return value: * 1 if ok * 0 if an invalid parameter combination was specified @@ -1934,67 +1934,67 @@ static int sbmac_set_speed(struct sbmac_softc *s,sbmac_speed_t speed) static int sbmac_set_duplex(struct sbmac_softc *s,sbmac_duplex_t duplex,sbmac_fc_t fc) { uint64_t cfg; - + /* * Save new current values */ - + s->sbm_duplex = duplex; s->sbm_fc = fc; - + if (s->sbm_state == sbmac_state_on) return 0; /* save for next restart */ - + /* - * Read current register values + * Read current register values */ - + cfg = __raw_readq(s->sbm_maccfg); - + /* * Mask off the stuff we're about to change */ - + cfg &= ~(M_MAC_FC_SEL | M_MAC_FC_CMD | M_MAC_HDX_EN); - - + + switch (duplex) { case sbmac_duplex_half: switch (fc) { case sbmac_fc_disabled: cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_DISABLED; break; - + case sbmac_fc_collision: cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENABLED; break; - + case sbmac_fc_carrier: cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENAB_FALSECARR; break; - + case sbmac_fc_auto: /* XXX not implemented */ - /* fall through */ + /* fall through */ case sbmac_fc_frame: /* not valid in half duplex */ default: /* invalid selection */ return 0; } break; - + case sbmac_duplex_full: switch (fc) { case sbmac_fc_disabled: cfg |= V_MAC_FC_CMD_DISABLED; break; - + case sbmac_fc_frame: cfg |= V_MAC_FC_CMD_ENABLED; break; - + case sbmac_fc_collision: /* not valid in full duplex */ case sbmac_fc_carrier: /* not valid in full duplex */ case sbmac_fc_auto: /* XXX not implemented */ - /* fall through */ + /* fall through */ default: return 0; } @@ -2003,13 +2003,13 @@ static int sbmac_set_duplex(struct sbmac_softc *s,sbmac_duplex_t duplex,sbmac_fc /* XXX not implemented */ break; } - + /* - * Send the bits back to the hardware + * Send the bits back to the hardware */ - + __raw_writeq(cfg, s->sbm_maccfg); - + return 1; } @@ -2018,12 +2018,12 @@ static int sbmac_set_duplex(struct sbmac_softc *s,sbmac_duplex_t duplex,sbmac_fc /********************************************************************** * SBMAC_INTR() - * + * * Interrupt handler for MAC interrupts - * - * Input parameters: + * + * Input parameters: * MAC structure - * + * * Return value: * nothing ********************************************************************* */ @@ -2035,27 +2035,27 @@ static irqreturn_t sbmac_intr(int irq,void *dev_instance,struct pt_regs *rgs) int handled = 0; for (;;) { - + /* * Read the ISR (this clears the bits in the real * register, except for counter addr) */ - + isr = __raw_readq(sc->sbm_isr) & ~M_MAC_COUNTER_ADDR; - + if (isr == 0) break; handled = 1; - + /* * Transmits on channel 0 */ - + if (isr & (M_MAC_INT_CHANNEL << S_MAC_TX_CH0)) { sbdma_tx_process(sc,&(sc->sbm_txdma)); } - + /* * Receives on channel 0 */ @@ -2075,8 +2075,8 @@ static irqreturn_t sbmac_intr(int irq,void *dev_instance,struct pt_regs *rgs) * EOP_SEEN here takes care of this case. * (EOP_SEEN is part of M_MAC_INT_CHANNEL << S_MAC_RX_CH0) */ - - + + if (isr & (M_MAC_INT_CHANNEL << S_MAC_RX_CH0)) { sbdma_rx_process(sc,&(sc->sbm_rxdma)); } @@ -2087,29 +2087,29 @@ static irqreturn_t sbmac_intr(int irq,void *dev_instance,struct pt_regs *rgs) /********************************************************************** * SBMAC_START_TX(skb,dev) - * - * Start output on the specified interface. Basically, we + * + * Start output on the specified interface. Basically, we * queue as many buffers as we can until the ring fills up, or * we run off the end of the queue, whichever comes first. - * - * Input parameters: - * - * + * + * Input parameters: + * + * * Return value: * nothing ********************************************************************* */ static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev) { struct sbmac_softc *sc = netdev_priv(dev); - + /* lock eth irq */ spin_lock_irq (&sc->sbm_lock); - + /* - * Put the buffer on the transmit ring. If we + * Put the buffer on the transmit ring. If we * don't have room, stop the queue. */ - + if (sbdma_add_txbuffer(&(sc->sbm_txdma),skb)) { /* XXX save skb that we could not send */ netif_stop_queue(dev); @@ -2117,24 +2117,24 @@ static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev) return 1; } - + dev->trans_start = jiffies; - + spin_unlock_irq (&sc->sbm_lock); - + return 0; } /********************************************************************** * SBMAC_SETMULTI(sc) - * + * * Reprogram the multicast table into the hardware, given * the list of multicasts associated with the interface * structure. - * - * Input parameters: + * + * Input parameters: * sc - softc - * + * * Return value: * nothing ********************************************************************* */ @@ -2146,52 +2146,52 @@ static void sbmac_setmulti(struct sbmac_softc *sc) int idx; struct dev_mc_list *mclist; struct net_device *dev = sc->sbm_dev; - - /* + + /* * Clear out entire multicast table. We do this by nuking * the entire hash table and all the direct matches except - * the first one, which is used for our station address + * the first one, which is used for our station address */ - + for (idx = 1; idx < MAC_ADDR_COUNT; idx++) { port = sc->sbm_base + R_MAC_ADDR_BASE+(idx*sizeof(uint64_t)); __raw_writeq(0, port); } - + for (idx = 0; idx < MAC_HASH_COUNT; idx++) { port = sc->sbm_base + R_MAC_HASH_BASE+(idx*sizeof(uint64_t)); __raw_writeq(0, port); } - + /* * Clear the filter to say we don't want any multicasts. */ - + reg = __raw_readq(sc->sbm_rxfilter); reg &= ~(M_MAC_MCAST_INV | M_MAC_MCAST_EN); __raw_writeq(reg, sc->sbm_rxfilter); - + if (dev->flags & IFF_ALLMULTI) { - /* - * Enable ALL multicasts. Do this by inverting the - * multicast enable bit. + /* + * Enable ALL multicasts. Do this by inverting the + * multicast enable bit. */ reg = __raw_readq(sc->sbm_rxfilter); reg |= (M_MAC_MCAST_INV | M_MAC_MCAST_EN); __raw_writeq(reg, sc->sbm_rxfilter); return; } - - /* + + /* * Progam new multicast entries. For now, only use the * perfect filter. In the future we'll need to use the * hash filter if the perfect filter overflows */ - + /* XXX only using perfect filter for now, need to use hash * XXX if the table overflows */ - + idx = 1; /* skip station address */ mclist = dev->mc_list; while (mclist && (idx < MAC_ADDR_COUNT)) { @@ -2201,12 +2201,12 @@ static void sbmac_setmulti(struct sbmac_softc *sc) idx++; mclist = mclist->next; } - - /* + + /* * Enable the "accept multicast bits" if we programmed at least one - * multicast. + * multicast. */ - + if (idx > 1) { reg = __raw_readq(sc->sbm_rxfilter); reg |= M_MAC_MCAST_EN; @@ -2219,12 +2219,12 @@ static void sbmac_setmulti(struct sbmac_softc *sc) #if defined(SBMAC_ETH0_HWADDR) || defined(SBMAC_ETH1_HWADDR) || defined(SBMAC_ETH2_HWADDR) /********************************************************************** * SBMAC_PARSE_XDIGIT(str) - * + * * Parse a hex digit, returning its value - * - * Input parameters: + * + * Input parameters: * str - character - * + * * Return value: * hex value, or -1 if invalid ********************************************************************* */ @@ -2232,7 +2232,7 @@ static void sbmac_setmulti(struct sbmac_softc *sc) static int sbmac_parse_xdigit(char str) { int digit; - + if ((str >= '0') && (str <= '9')) digit = str - '0'; else if ((str >= 'a') && (str <= 'f')) @@ -2241,20 +2241,20 @@ static int sbmac_parse_xdigit(char str) digit = str - 'A' + 10; else return -1; - + return digit; } /********************************************************************** * SBMAC_PARSE_HWADDR(str,hwaddr) - * + * * Convert a string in the form xx:xx:xx:xx:xx:xx into a 6-byte * Ethernet address. - * - * Input parameters: + * + * Input parameters: * str - string * hwaddr - pointer to hardware address - * + * * Return value: * 0 if ok, else -1 ********************************************************************* */ @@ -2263,7 +2263,7 @@ static int sbmac_parse_hwaddr(char *str, unsigned char *hwaddr) { int digit1,digit2; int idx = 6; - + while (*str && (idx > 0)) { digit1 = sbmac_parse_xdigit(*str); if (digit1 < 0) @@ -2271,7 +2271,7 @@ static int sbmac_parse_hwaddr(char *str, unsigned char *hwaddr) str++; if (!*str) return -1; - + if ((*str == ':') || (*str == '-')) { digit2 = digit1; digit1 = 0; @@ -2282,10 +2282,10 @@ static int sbmac_parse_hwaddr(char *str, unsigned char *hwaddr) return -1; str++; } - + *hwaddr++ = (digit1 << 4) | digit2; idx--; - + if (*str == '-') str++; if (*str == ':') @@ -2306,12 +2306,12 @@ static int sb1250_change_mtu(struct net_device *_dev, int new_mtu) /********************************************************************** * SBMAC_INIT(dev) - * + * * Attach routine - init hardware and hook ourselves into linux - * - * Input parameters: + * + * Input parameters: * dev - net_device structure - * + * * Return value: * status ********************************************************************* */ @@ -2323,53 +2323,53 @@ static int sbmac_init(struct net_device *dev, int idx) uint64_t ea_reg; int i; int err; - + sc = netdev_priv(dev); - + /* Determine controller base address */ - + sc->sbm_base = IOADDR(dev->base_addr); sc->sbm_dev = dev; sc->sbe_idx = idx; - + eaddr = sc->sbm_hwaddr; - - /* + + /* * Read the ethernet address. The firwmare left this programmed * for us in the ethernet address register for each mac. */ - + ea_reg = __raw_readq(sc->sbm_base + R_MAC_ETHERNET_ADDR); __raw_writeq(0, sc->sbm_base + R_MAC_ETHERNET_ADDR); for (i = 0; i < 6; i++) { eaddr[i] = (uint8_t) (ea_reg & 0xFF); ea_reg >>= 8; } - + for (i = 0; i < 6; i++) { dev->dev_addr[i] = eaddr[i]; } - - + + /* - * Init packet size + * Init packet size */ - + sc->sbm_buffersize = ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN; - /* + /* * Initialize context (get pointers to registers and stuff), then * allocate the memory for the descriptor tables. */ - + sbmac_initctx(sc); - + /* * Set up Linux device callins */ - + spin_lock_init(&(sc->sbm_lock)); - + dev->open = sbmac_open; dev->hard_start_xmit = sbmac_start_tx; dev->stop = sbmac_close; @@ -2399,10 +2399,10 @@ static int sbmac_init(struct net_device *dev, int idx) * was being displayed) */ printk(KERN_INFO - "%s: SiByte Ethernet at 0x%08lX, address: %02X:%02X:%02X:%02X:%02X:%02X\n", + "%s: SiByte Ethernet at 0x%08lX, address: %02X:%02X:%02X:%02X:%02X:%02X\n", dev->name, dev->base_addr, eaddr[0],eaddr[1],eaddr[2],eaddr[3],eaddr[4],eaddr[5]); - + return 0; @@ -2416,12 +2416,12 @@ out_uninit: static int sbmac_open(struct net_device *dev) { struct sbmac_softc *sc = netdev_priv(dev); - + if (debug > 1) { printk(KERN_DEBUG "%s: sbmac_open() irq %d.\n", dev->name, dev->irq); } - - /* + + /* * map/route interrupt (clear status first, in case something * weird is pending; we haven't initialized the mac registers * yet) @@ -2432,35 +2432,35 @@ static int sbmac_open(struct net_device *dev) return -EBUSY; /* - * Configure default speed + * Configure default speed */ sbmac_mii_poll(sc,noisy_mii); - + /* * Turn on the channel */ sbmac_set_channel_state(sc,sbmac_state_on); - + /* * XXX Station address is in dev->dev_addr */ - + if (dev->if_port == 0) - dev->if_port = 0; - + dev->if_port = 0; + netif_start_queue(dev); - + sbmac_set_rx_mode(dev); - + /* Set the timer to check for link beat. */ init_timer(&sc->sbm_timer); sc->sbm_timer.expires = jiffies + 2 * HZ/100; sc->sbm_timer.data = (unsigned long)dev; sc->sbm_timer.function = &sbmac_timer; add_timer(&sc->sbm_timer); - + return 0; } @@ -2578,20 +2578,20 @@ static void sbmac_timer(unsigned long data) int mii_status; spin_lock_irq (&sc->sbm_lock); - + /* make IFF_RUNNING follow the MII status bit "Link established" */ mii_status = sbmac_mii_read(sc, sc->sbm_phys[0], MII_BMSR); - + if ( (mii_status & BMSR_LINKSTAT) != (sc->sbm_phy_oldlinkstat) ) { sc->sbm_phy_oldlinkstat = mii_status & BMSR_LINKSTAT; if (mii_status & BMSR_LINKSTAT) { netif_carrier_on(dev); } else { - netif_carrier_off(dev); + netif_carrier_off(dev); } } - + /* * Poll the PHY to see what speed we should be running at */ @@ -2609,9 +2609,9 @@ static void sbmac_timer(unsigned long data) sbmac_channel_start(sc); } } - + spin_unlock_irq (&sc->sbm_lock); - + sc->sbm_timer.expires = jiffies + next_tick; add_timer(&sc->sbm_timer); } @@ -2620,13 +2620,13 @@ static void sbmac_timer(unsigned long data) static void sbmac_tx_timeout (struct net_device *dev) { struct sbmac_softc *sc = netdev_priv(dev); - + spin_lock_irq (&sc->sbm_lock); - - + + dev->trans_start = jiffies; sc->sbm_stats.tx_errors++; - + spin_unlock_irq (&sc->sbm_lock); printk (KERN_WARNING "%s: Transmit timed out\n",dev->name); @@ -2639,13 +2639,13 @@ static struct net_device_stats *sbmac_get_stats(struct net_device *dev) { struct sbmac_softc *sc = netdev_priv(dev); unsigned long flags; - + spin_lock_irqsave(&sc->sbm_lock, flags); - + /* XXX update other stats here */ - + spin_unlock_irqrestore(&sc->sbm_lock, flags); - + return &sc->sbm_stats; } @@ -2662,8 +2662,8 @@ static void sbmac_set_rx_mode(struct net_device *dev) /* * Promiscuous changed. */ - - if (dev->flags & IFF_PROMISC) { + + if (dev->flags & IFF_PROMISC) { /* Unconditionally log net taps. */ msg_flag = 1; sbmac_promiscuous_mode(sc,1); @@ -2674,18 +2674,18 @@ static void sbmac_set_rx_mode(struct net_device *dev) } } spin_unlock_irqrestore(&sc->sbm_lock, flags); - + if (msg_flag) { printk(KERN_NOTICE "%s: Promiscuous mode %sabled.\n", dev->name,(msg_flag==1)?"en":"dis"); } - + /* * Program the multicasts. Do this every time. */ - + sbmac_setmulti(sc); - + } static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) @@ -2694,10 +2694,10 @@ static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) u16 *data = (u16 *)&rq->ifr_ifru; unsigned long flags; int retval; - + spin_lock_irqsave(&sc->sbm_lock, flags); retval = 0; - + switch(cmd) { case SIOCDEVPRIVATE: /* Get the address of the PHY in use. */ data[0] = sc->sbm_phys[0] & 0x1f; @@ -2719,7 +2719,7 @@ static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) default: retval = -EOPNOTSUPP; } - + spin_unlock_irqrestore(&sc->sbm_lock, flags); return retval; } @@ -2750,7 +2750,7 @@ static int sbmac_close(struct net_device *dev) sbdma_emptyring(&(sc->sbm_txdma)); sbdma_emptyring(&(sc->sbm_rxdma)); - + return 0; } @@ -2781,7 +2781,7 @@ sbmac_init_module(void) struct net_device *dev; unsigned long port; int chip_max_units; - + /* * For bringup when not using the firmware, we can pre-fill * the MAC addresses using the environment variables @@ -2827,7 +2827,7 @@ sbmac_init_module(void) port = A_MAC_CHANNEL_BASE(idx); - /* + /* * The R_MAC_ETHERNET_ADDR register will be set to some nonzero * value for us by the firmware if we're going to use this MAC. * If we find a zero, skip this MAC. @@ -2845,7 +2845,7 @@ sbmac_init_module(void) */ dev = alloc_etherdev(sizeof(struct sbmac_softc)); - if (!dev) + if (!dev) return -ENOMEM; /* return ENOMEM */ printk(KERN_DEBUG "sbmac: configuring MAC at %lx\n", port);