From: Raanan Avargil Date: Tue, 22 Dec 2015 13:35:02 +0000 (+0200) Subject: e1000e: Increase PHY PLL clock gate timing X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=74f31299a41e729226d60426087592b6790f22b7;p=linux-beck.git e1000e: Increase PHY PLL clock gate timing Several packet loss issues were reported for which the root cause for them was an incorrect configuration of internal HW PHY clock gating mechanism by SW. This patch provides the correct mechanism. Signed-off-by: Raanan Avargil Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index c731465d1999..786d2148dd67 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1433,6 +1433,18 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) emi_addr = I217_RX_CONFIG; ret_val = e1000_write_emi_reg_locked(hw, emi_addr, emi_val); + if (hw->mac.type == e1000_pch_lpt || + hw->mac.type == e1000_pch_spt) { + u16 phy_reg; + + e1e_rphy_locked(hw, I217_PLL_CLOCK_GATE_REG, &phy_reg); + phy_reg &= ~I217_PLL_CLOCK_GATE_MASK; + if (speed == SPEED_100 || speed == SPEED_10) + phy_reg |= 0x3E8; + else + phy_reg |= 0xFA; + e1e_wphy_locked(hw, I217_PLL_CLOCK_GATE_REG, phy_reg); + } hw->phy.ops.release(hw); if (ret_val) diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h index 34c551e322eb..7d85f002c3d2 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.h +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h @@ -226,6 +226,9 @@ #define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA 0x100 #define HV_PM_CTRL_K1_ENABLE 0x4000 +#define I217_PLL_CLOCK_GATE_REG PHY_REG(772, 28) +#define I217_PLL_CLOCK_GATE_MASK 0x07FF + #define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in ms */ /* Inband Control */