From: Lothar Waßmann <LW@KARO-electronics.de>
Date: Wed, 20 Jan 2016 12:57:03 +0000 (+0100)
Subject: ARM: dts: imx6qdl-tx6: add ENET_OUT clock to fec node
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=765919103a50ab80723f4e1c01ba1173c12938e5;p=linux-beck.git

ARM: dts: imx6qdl-tx6: add ENET_OUT clock to fec node

ENET_OUT is used as reference clock for the ethernet PHY on the Ka-Ro
TX6 modules. Specify this clock in DTB to let it be managed correctly
by the driver.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---

diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index 29f2c2a8f4fd..efd06b576f1d 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -227,6 +227,11 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET_REF>,
+		 <&clks IMX6QDL_CLK_ENET_REF>;
+	clock-names = "ipg", "ahb", "ptp", "enet_out";
 	phy-mode = "rmii";
 	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
 	phy-supply = <&reg_3v3_etn>;