From: H. Nikolaus Schaller Date: Fri, 27 Feb 2015 21:26:37 +0000 (+0100) Subject: ARM: dts: omap3-pandora: add common device tree X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=771048f59d068f0baf22fef7f952e8d4cca158af;p=linux-beck.git ARM: dts: omap3-pandora: add common device tree This device tree allows to boot, supports the panel, framebuffer, touch screen, as well as some more peripherals. Since there is a OMAP3530 based 600 MHz variant and a DM3730 based 1 GHz variant we must include this common device tree code in one of two CPU specific device trees. Signed-off-by: H. Nikolaus Schaller Signed-off-by: Marek Belisko Tested-by: Grazvydas Ignotas Reviewed-by: Grazvydas Ignotas Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi new file mode 100644 index 000000000000..782ab1ff1d08 --- /dev/null +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -0,0 +1,640 @@ +/* + * Copyright (C) 2015 + * Nikolaus Schaller + * + * Common device tree include for OpenPandora devices. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +/ { + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + aliases { + display0 = &lcd; + }; + + tv: connector@1 { + compatible = "connector-analog-tv"; + label = "tv"; + + port { + tv_connector_in: endpoint { + remote-endpoint = <&venc_out>; + }; + }; + }; + + gpio-leds { + + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + led@1 { + label = "pandora::sd1"; + gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* GPIO_128 */ + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@2 { + label = "pandora::sd2"; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* GPIO_129 */ + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + led@3 { + label = "pandora::bluetooth"; + gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; /* GPIO_158 */ + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@4 { + label = "pandora::wifi"; + gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; /* GPIO_159 */ + linux,default-trigger = "mmc2"; + default-state = "off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&button_pins>; + + up-button { + label = "up"; + linux,code = ; + gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* GPIO_110 */ + gpio-key,wakeup; + }; + + down-button { + label = "down"; + linux,code = ; + gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* GPIO_103 */ + gpio-key,wakeup; + }; + + left-button { + label = "left"; + linux,code = ; + gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; /* GPIO_96 */ + gpio-key,wakeup; + }; + + right-button { + label = "right"; + linux,code = ; + gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; /* GPIO_98 */ + gpio-key,wakeup; + }; + + pageup-button { + label = "game 1"; + linux,code = ; + gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* GPIO_109 */ + gpio-key,wakeup; + }; + + pagedown-button { + label = "game 3"; + linux,code = ; + gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* GPIO_106 */ + gpio-key,wakeup; + }; + + home-button { + label = "game 4"; + linux,code = ; + gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* GPIO_101 */ + gpio-key,wakeup; + }; + + end-button { + label = "game 2"; + linux,code = ; + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* GPIO_111 */ + gpio-key,wakeup; + }; + + right-shift { + label = "l"; + linux,code = ; + gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* GPIO_102 */ + gpio-key,wakeup; + }; + + kp-plus { + label = "l2"; + linux,code = ; + gpios = <&gpio4 1 GPIO_ACTIVE_LOW>; /* GPIO_97 */ + gpio-key,wakeup; + }; + + right-ctrl { + label = "r"; + linux,code = ; + gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* GPIO_105 */ + gpio-key,wakeup; + }; + + kp-minus { + label = "r2"; + linux,code = ; + gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* GPIO_107 */ + gpio-key,wakeup; + }; + + left-ctrl { + label = "ctrl"; + linux,code = ; + gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* GPIO_104 */ + gpio-key,wakeup; + }; + + menu { + label = "menu"; + linux,code = ; + gpios = <&gpio4 3 GPIO_ACTIVE_LOW>; /* GPIO_99 */ + gpio-key,wakeup; + }; + + hold { + label = "hold"; + linux,code = ; + gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* GPIO_176 */ + gpio-key,wakeup; + }; + + left-alt { + label = "alt"; + linux,code = ; + gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; /* GPIO_100 */ + gpio-key,wakeup; + }; + + lid { + label = "lid"; + linux,code = <0x00>; /* SW_LID lid shut */ + linux,input-type = <0x05>; /* EV_SW */ + gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; /* GPIO_108 */ + }; + }; +}; + +&omap3_pmx_core { + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat4.sdmmc2_dirdat0 */ + OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat5.sdmmc2_dirdat1 */ + OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat6.sdmmc2_dircmd */ + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat7.sdmmc2_clkin */ + >; + }; + + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* GPIO_157 = lcd reset */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + >; + }; + + led_pins: pinmux_leds_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2154, PIN_OUTPUT | MUX_MODE4) /* GPIO_128 */ + OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* GPIO_129 */ + OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE4) /* GPIO_158 */ + OMAP3_CORE1_IOPAD(0x2192, PIN_OUTPUT | MUX_MODE4) /* GPIO_159 */ + >; + }; + + button_pins: pinmux_button_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE4) /* GPIO_96 */ + OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE4) /* GPIO_97 */ + OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE4) /* GPIO_98 */ + OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE4) /* GPIO_99 */ + OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE4) /* GPIO_100 */ + OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* GPIO_101 */ + OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4) /* GPIO_102 */ + OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4) /* GPIO_103 */ + OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4) /* GPIO_104 */ + OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4) /* GPIO_105 */ + OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4) /* GPIO_106 */ + OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4) /* GPIO_107 */ + OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4) /* GPIO_108 */ + OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4) /* GPIO_109 */ + OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT | MUX_MODE4) /* GPIO_110 */ + OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4) /* GPIO_111 */ + OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* GPIO_176 */ + >; + }; + + penirq_pins: pinmux_penirq_pins { + pinctrl-single,pins = < + /* here we could enable to wakeup the cpu from suspend by a pen touch */ + OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE4) /* GPIO_94 */ + >; + }; + +}; + +&omap3_pmx_core2 { + /* define in CPU specific file that includes this one + * use either OMAP3430_CORE2_IOPAD() or OMAP3630_CORE2_IOPAD() + */ +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + + twl_power: power { + compatible = "ti,twl4030-power-reset"; + ti,use_poweroff; + }; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + + codec { + ti,ramp_delay_value = <3>; + }; + }; + }; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&twl_keypad { + keypad,num-rows = <8>; + keypad,num-columns = <6>; + linux,keymap = < + MATRIX_KEY(0, 0, KEY_9) + MATRIX_KEY(0, 1, KEY_8) + MATRIX_KEY(0, 2, KEY_I) + MATRIX_KEY(0, 3, KEY_J) + MATRIX_KEY(0, 4, KEY_N) + MATRIX_KEY(0, 5, KEY_M) + MATRIX_KEY(1, 0, KEY_0) + MATRIX_KEY(1, 1, KEY_7) + MATRIX_KEY(1, 2, KEY_U) + MATRIX_KEY(1, 3, KEY_H) + MATRIX_KEY(1, 4, KEY_B) + MATRIX_KEY(1, 5, KEY_SPACE) + MATRIX_KEY(2, 0, KEY_BACKSPACE) + MATRIX_KEY(2, 1, KEY_6) + MATRIX_KEY(2, 2, KEY_Y) + MATRIX_KEY(2, 3, KEY_G) + MATRIX_KEY(2, 4, KEY_V) + MATRIX_KEY(2, 5, KEY_FN) + MATRIX_KEY(3, 0, KEY_O) + MATRIX_KEY(3, 1, KEY_5) + MATRIX_KEY(3, 2, KEY_T) + MATRIX_KEY(3, 3, KEY_F) + MATRIX_KEY(3, 4, KEY_C) + MATRIX_KEY(4, 0, KEY_P) + MATRIX_KEY(4, 1, KEY_4) + MATRIX_KEY(4, 2, KEY_R) + MATRIX_KEY(4, 3, KEY_D) + MATRIX_KEY(4, 4, KEY_X) + MATRIX_KEY(5, 0, KEY_K) + MATRIX_KEY(5, 1, KEY_3) + MATRIX_KEY(5, 2, KEY_E) + MATRIX_KEY(5, 3, KEY_S) + MATRIX_KEY(5, 4, KEY_Z) + MATRIX_KEY(6, 0, KEY_L) + MATRIX_KEY(6, 1, KEY_2) + MATRIX_KEY(6, 2, KEY_W) + MATRIX_KEY(6, 3, KEY_A) + MATRIX_KEY(6, 4, KEY_RIGHTBRACE) + MATRIX_KEY(7, 0, KEY_ENTER) + MATRIX_KEY(7, 1, KEY_1) + MATRIX_KEY(7, 2, KEY_Q) + MATRIX_KEY(7, 3, KEY_LEFTSHIFT) + MATRIX_KEY(7, 4, KEY_LEFTBRACE ) + >; +}; + +/* backup battery charger */ +&charger { + ti,bb-uvolt = <3200000>; + ti,bb-uamp = <150>; +}; + +/* MMC2 */ +&vmmc2 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <3150000>; +}; + +/* LCD */ +&vaux1 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; +}; + +/* USB Host PHY */ +&vaux2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + +/* available on expansion connector */ +&vaux3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + +/* ADS7846 and nubs */ +&vaux4 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + +/* power audio DAC and LID sensor */ +&vsim { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; +}; + +&i2c2 { + clock-frequency = <100000>; + /* no clients so we should disable clock */ +}; + +&i2c3 { + clock-frequency = <100000>; + + bq27500@55 { + compatible = "ti,bq27500"; + reg = <0x55>; + }; + +}; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vmmc1>; + bus-width = <4>; + cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>; /* GPIO_126 */ +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&vmmc2>; + bus-width = <4>; + cd-gpios = <&twl_gpio 1 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* GPIO_127 */ +}; + +/* bluetooth*/ +&uart1 { +}; + +/* spare (expansion connector) */ +&uart2 { +}; + +/* console (expansion connector) */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; +}; + +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&gpmc { + ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ + + nand@0,0 { + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + nand-bus-width = <16>; + ti,nand-ecc-opt = "sw"; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + gpmc,device-width = <2>; + + #address-cells = <1>; + #size-cells = <1>; + + /* u-boot uses mtdparts=nand:512k(xloader),1920k(uboot),128k(uboot-env),10m(boot),-(rootfs) */ + + x-loader@0 { + label = "xloader"; + reg = <0 0x80000>; + }; + + bootloaders@80000 { + label = "uboot"; + reg = <0x80000 0x1e0000>; + }; + + bootloaders_env@260000 { + label = "uboot-env"; + reg = <0x260000 0x20000>; + }; + + kernel@280000 { + label = "boot"; + reg = <0x280000 0xa00000>; + }; + + filesystem@680000 { + label = "rootfs"; + reg = <0xc80000 0>; /* 0 = MTDPART_SIZ_FULL */ + }; + }; +}; + +&mcspi1 { + tsc2046@0 { + reg = <0>; /* CS0 */ + compatible = "ti,tsc2046"; + spi-max-frequency = <1000000>; + pinctrl-names = "default"; + pinctrl-0 = <&penirq_pins>; + interrupt-parent = <&gpio3>; + interrupts = <30 0>; /* GPIO_94 */ + pendown-gpio = <&gpio3 30 0>; + vcc-supply = <&vaux4>; + + ti,x-min = /bits/ 16 <0>; + ti,x-max = /bits/ 16 <8000>; + ti,y-min = /bits/ 16 <0>; + ti,y-max = /bits/ 16 <4800>; + ti,x-plate-ohms = /bits/ 16 <40>; + ti,pressure-max = /bits/ 16 <255>; + + linux,wakeup; + }; + + lcd: lcd@1 { + reg = <1>; /* CS1 */ + compatible = "omapdss,tpo,td043mtea1"; + spi-max-frequency = <100000>; + spi-cpol; + spi-cpha; + + label = "lcd"; + reset-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; /* GPIO_157 */ + vcc-supply = <&vaux1>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + + +}; + +/* n/a - used as GPIOs */ +&mcbsp1 { +}; + +/* audio DAC */ +&mcbsp2 { +}; + +/* bluetooth */ +&mcbsp3 { +}; + +/* to twl4030*/ +&mcbsp4 { +}; + +&venc { + status = "ok"; + + vdda-supply = <&vdac>; + + port { + venc_out: endpoint { + remote-endpoint = <&tv_connector_in>; + ti,channels = <2>; + }; + }; +}; + +&dss { + pinctrl-names = "default"; + pinctrl-0 = < &dss_dpi_pins >; + + status = "ok"; + vdds_dsi-supply = <&vpll2>; + + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +};