From: Tony LIU Date: Wed, 8 Feb 2012 07:33:56 +0000 (+0800) Subject: ENGR00174037-1 Add HSIC suspend/resume feature X-Git-Tag: v3.0.35-fsl~1516 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=77fc1e7e5ee352585dc809cd0a7f0d29519934b3;p=karo-tx-linux.git ENGR00174037-1 Add HSIC suspend/resume feature MSL part - For HSIC, not connect nor disconnect, then WKCN, WKDC must not be set during suspend - For HSIC, must set bit 21 in host control registry after device connected to host controller - USB PHY 480M clock output must turn on to avoid about 10ms delay before sending out resume signal - HW_ANA_MISC clkgate delay must be set to 2 or 3 to avoid 24M OSCI not stable issue Signed-off-by: Tony LIU --- diff --git a/arch/arm/mach-mx6/usb_h2.c b/arch/arm/mach-mx6/usb_h2.c index edbad95a82ad..a1e32efc5b84 100644 --- a/arch/arm/mach-mx6/usb_h2.c +++ b/arch/arm/mach-mx6/usb_h2.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2011-2012 Freescale Semiconductor, Inc. All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -43,11 +43,17 @@ static struct fsl_usb2_platform_data usbh2_config; static void usbh2_internal_phy_clock_gate(bool on) { if (on) { + /* must turn on the 480M clock, otherwise + * there will be a 10ms delay before host + * controller send out resume signal*/ USB_H2_CTRL |= UCTRL_UTMI_ON_CLOCK; USB_UH2_HSIC_CTRL |= HSIC_CLK_ON; } else { USB_UH2_HSIC_CTRL &= ~HSIC_CLK_ON; - USB_H2_CTRL &= ~UCTRL_UTMI_ON_CLOCK; + /* can't turn off this clock, otherwise + * there will be a 10ms delay before host + * controller send out resume signal*/ + /*USB_H2_CTRL &= ~UCTRL_UTMI_ON_CLOCK*/; } } @@ -113,6 +119,10 @@ void mx6_set_host2_vbus_func(driver_vbus_func driver_vbus) static void _wake_up_enable(struct fsl_usb2_platform_data *pdata, bool enable) { pr_debug("host2, %s, enable is %d\n", __func__, enable); + /* for HSIC, no disconnect nor connect + * we need to disable the WKDS, WKCN */ + UH2_PORTSC1 &= ~(PORTSC_WKDC | PORTSC_WKCN); + if (enable) { USB_H2_CTRL |= (UCTRL_OWIE); } else { @@ -172,6 +182,13 @@ static void hsic_start(void) mxc_iomux_v3_setup_pad(MX6Q_PAD_RGMII_TX_CTL__USBOH3_H2_STROBE_START); } +static void hsic_device_connected(void) +{ + pr_debug("%s\n", __func__); + if (!(USB_UH2_HSIC_CTRL & HSIC_DEV_CONN)) + USB_UH2_HSIC_CTRL |= HSIC_DEV_CONN; +} + static struct fsl_usb2_platform_data usbh2_config = { .name = "Host 2", .init = fsl_usb_host_init_ext, @@ -186,6 +203,7 @@ static struct fsl_usb2_platform_data usbh2_config = { .wakeup_handler = h2_wakeup_handler, .transceiver = "hsic_xcvr", .hsic_post_ops = hsic_start, + .hsic_device_connected = hsic_device_connected, }; static struct fsl_usb2_wakeup_platform_data usbh2_wakeup_config = { @@ -211,4 +229,8 @@ void __init mx6_usb_h2_init(void) */ __raw_writel(BM_ANADIG_USB1_PLL_480_CTRL_EN_USB_CLKS, anatop_base_addr + HW_ANADIG_USB1_PLL_480_CTRL_SET); + /* must change the clkgate delay to 2 or 3 to avoid + * 24M OSCI clock not stable issue */ + __raw_writel(BF_ANADIG_ANA_MISC0_CLKGATE_DELAY(3), + anatop_base_addr + HW_ANADIG_ANA_MISC0); } diff --git a/arch/arm/mach-mx6/usb_h3.c b/arch/arm/mach-mx6/usb_h3.c index 43c2b1208eed..93210b48805a 100644 --- a/arch/arm/mach-mx6/usb_h3.c +++ b/arch/arm/mach-mx6/usb_h3.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2011-2012 Freescale Semiconductor, Inc. All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -43,11 +43,17 @@ static struct fsl_usb2_platform_data usbh3_config; static void usbh3_internal_phy_clock_gate(bool on) { if (on) { + /* must turn on the 480M clock, otherwise + * there will be a 10ms delay before host + * controller send out resume signal*/ USB_H3_CTRL |= UCTRL_UTMI_ON_CLOCK; USB_UH3_HSIC_CTRL |= HSIC_CLK_ON; } else { USB_UH3_HSIC_CTRL &= ~HSIC_CLK_ON; - USB_H3_CTRL &= ~UCTRL_UTMI_ON_CLOCK; + /* can't turn off this clock, otherwise + * there will be a 10ms delay before host + * controller send out resume signal*/ + /*USB_H3_CTRL &= ~UCTRL_UTMI_ON_CLOCK;*/ } } @@ -114,6 +120,10 @@ void mx6_set_host3_vbus_func(driver_vbus_func driver_vbus) static void _wake_up_enable(struct fsl_usb2_platform_data *pdata, bool enable) { pr_debug("host3, %s, enable is %d\n", __func__, enable); + /* for HSIC, no disconnect nor connect + * we need to disable the WKDS, WKCN */ + UH3_PORTSC1 &= ~(PORTSC_WKDC | PORTSC_WKCN); + if (enable) { USB_H3_CTRL |= (UCTRL_OWIE); } else { @@ -173,6 +183,13 @@ static void hsic_start(void) mxc_iomux_v3_setup_pad(MX6Q_PAD_RGMII_RXC__USBOH3_H3_STROBE_START); } +static void hsic_device_connected(void) +{ + pr_debug("%s\n", __func__); + if (!(USB_UH3_HSIC_CTRL & HSIC_DEV_CONN)) + USB_UH3_HSIC_CTRL |= HSIC_DEV_CONN; +} + static struct fsl_usb2_platform_data usbh3_config = { .name = "Host 3", .init = fsl_usb_host_init_ext, @@ -187,6 +204,7 @@ static struct fsl_usb2_platform_data usbh3_config = { .wakeup_handler = usbh3_wakeup_handler, .transceiver = "hsic_xcvr", .hsic_post_ops = hsic_start, + .hsic_device_connected = hsic_device_connected, }; static struct fsl_usb2_wakeup_platform_data usbh3_wakeup_config = { @@ -213,4 +231,8 @@ void __init mx6_usb_h3_init(void) */ __raw_writel(BM_ANADIG_USB1_PLL_480_CTRL_EN_USB_CLKS, anatop_base_addr + HW_ANADIG_USB1_PLL_480_CTRL_SET); + /* must change the clkgate delay to 2 or 3 to avoid + * 24M OSCI clock not stable issue */ + __raw_writel(BF_ANADIG_ANA_MISC0_CLKGATE_DELAY(3), + anatop_base_addr + HW_ANADIG_ANA_MISC0); } diff --git a/arch/arm/plat-mxc/include/mach/arc_otg.h b/arch/arm/plat-mxc/include/mach/arc_otg.h index b5bd8c31a4b2..bdb6b252b356 100755 --- a/arch/arm/plat-mxc/include/mach/arc_otg.h +++ b/arch/arm/plat-mxc/include/mach/arc_otg.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2005-2011 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2005-2012 Freescale Semiconductor, Inc. All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -248,6 +248,8 @@ extern void __iomem *imx_otg_base; #define PORTSC_PTW (1 << 28) /* UTMI width */ #define PORTSC_HSIC_MODE (1 << 25) /* Only for HSIC */ #define PORTSC_PHCD (1 << 23) /* Low Power Suspend */ +#define PORTSC_WKDC (1 << 21) /* wakeup on discnt*/ +#define PORTSC_WKCN (1 << 20) /* wakeup on connect*/ #define PORTSC_PORT_POWER (1 << 12) /* port power */ #define PORTSC_LS_MASK (3 << 10) /* Line State mask */ #define PORTSC_LS_SE0 (0 << 10) /* SE0 */ diff --git a/arch/arm/plat-mxc/include/mach/regs-usbphy-mx6.h b/arch/arm/plat-mxc/include/mach/regs-usbphy-mx6.h index 060b176b43af..473d16c4fb48 100644 --- a/arch/arm/plat-mxc/include/mach/regs-usbphy-mx6.h +++ b/arch/arm/plat-mxc/include/mach/regs-usbphy-mx6.h @@ -1,7 +1,7 @@ /* * Freescale USBPHY Register Definitions * - * Copyright 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008-2012 Freescale Semiconductor, Inc. All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -468,6 +468,7 @@ /* Host2/3 HSIC Ctrl */ #define CLK_VLD (1 << 31) /* Indicating whether HSIC clock is valid */ +#define HSIC_DEV_CONN (1 << 21) /* set after device connected */ #define HSIC_EN (1 << 12) /* HSIC enable */ #define HSIC_CLK_ON (1 << 11) /* Force HSIC module 480M clock on, * even when in Host is in suspend mode