From: Takashi Iwai Date: Wed, 7 Mar 2012 09:58:39 +0000 (+0100) Subject: ALSA: hda - Set codec to D3 forcibly even if not used X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=785f857d1c;p=linux-beck.git ALSA: hda - Set codec to D3 forcibly even if not used We've seen a problem with a pop-noise at suspend/resume on a HP machine with ALC269, and it turned out to be an issue that the controller going to D3 while the codec is unused. When the device is once suspended and resumed and kept unused, the driver doesn't initialize the codecs. Instead, the codec chips are set up dynamically at the first usage. Now, suppose the device going to suspend again before the codec is set up. The controller is turned off to D3 while the codec chips are untouched. This caused a pop noise because the codec chip might have been turned on implicitly by the hardware. As a workaround, the codec chip needs to be set to D3 when going to suspend no matter whether it was used or not. Also, for making it happening, the controller has to be always set up in the resume path. Signed-off-by: Takashi Iwai --- diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 76bac4fc0472..0527ae1ab96e 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -5281,6 +5281,10 @@ int snd_hda_suspend(struct hda_bus *bus) list_for_each_entry(codec, &bus->codec_list, list) { if (hda_codec_is_power_on(codec)) hda_call_codec_suspend(codec); + else /* forcibly change the power to D3 even if not used */ + hda_set_power_state(codec, + codec->afg ? codec->afg : codec->mfg, + AC_PWRST_D3); if (codec->patch_ops.post_suspend) codec->patch_ops.post_suspend(codec); } diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 6e958bf94191..c19e71a94e1b 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2351,17 +2351,6 @@ static void azx_power_notify(struct hda_bus *bus) * power management */ -static int snd_hda_codecs_inuse(struct hda_bus *bus) -{ - struct hda_codec *codec; - - list_for_each_entry(codec, &bus->codec_list, list) { - if (snd_hda_codec_needs_resume(codec)) - return 1; - } - return 0; -} - static int azx_suspend(struct pci_dev *pci, pm_message_t state) { struct snd_card *card = pci_get_drvdata(pci); @@ -2408,8 +2397,7 @@ static int azx_resume(struct pci_dev *pci) return -EIO; azx_init_pci(chip); - if (snd_hda_codecs_inuse(chip->bus)) - azx_init_chip(chip, 1); + azx_init_chip(chip, 1); snd_hda_resume(chip->bus); snd_power_change_state(card, SNDRV_CTL_POWER_D0);