From: NeilBrown <neilb@suse.de>
Date: Thu, 21 May 2015 02:56:41 +0000 (+1000)
Subject: md/raid5: call break_stripe_batch_list from handle_stripe_clean_event
X-Git-Tag: v4.1-rc6~15^2~2
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=787b76fa37159050f6d26aebfa6210009baed93b;p=karo-tx-linux.git

md/raid5: call break_stripe_batch_list from handle_stripe_clean_event

Now that the code in break_stripe_batch_list() is nearly identical
to the end of handle_stripe_clean_event, replace the later
with a function call.

The only remaining difference of any interest is the masking that is
applieds to dev[i].flags copied from head_sh.
R5_WriteError certainly isn't wanted as it is set per-stripe, not
per-patch.  R5_Overlap isn't wanted as it is explicitly handled.

Signed-off-by: NeilBrown <neilb@suse.de>
---

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 1141b7f62e6e..3254504b1080 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3420,6 +3420,8 @@ static void handle_stripe_fill(struct stripe_head *sh,
 	set_bit(STRIPE_HANDLE, &sh->state);
 }
 
+static void break_stripe_batch_list(struct stripe_head *head_sh,
+				    unsigned long handle_flags);
 /* handle_stripe_clean_event
  * any written block on an uptodate or failed drive can be returned.
  * Note that if we 'wrote' to a failed drive, it will be UPTODATE, but
@@ -3433,7 +3435,6 @@ static void handle_stripe_clean_event(struct r5conf *conf,
 	int discard_pending = 0;
 	struct stripe_head *head_sh = sh;
 	bool do_endio = false;
-	int wakeup_nr = 0;
 
 	for (i = disks; i--; )
 		if (sh->dev[i].written) {
@@ -3522,62 +3523,8 @@ unhash:
 		if (atomic_dec_and_test(&conf->pending_full_writes))
 			md_wakeup_thread(conf->mddev->thread);
 
-	if (!head_sh->batch_head || !do_endio)
-		return;
-	for (i = 0; i < head_sh->disks; i++) {
-		if (test_and_clear_bit(R5_Overlap, &head_sh->dev[i].flags))
-			wakeup_nr++;
-	}
-	while (!list_empty(&head_sh->batch_list)) {
-		int i;
-		sh = list_first_entry(&head_sh->batch_list,
-				      struct stripe_head, batch_list);
-		list_del_init(&sh->batch_list);
-
-		WARN_ON_ONCE(sh->state & ((1 << STRIPE_ACTIVE) |
-					  (1 << STRIPE_SYNCING) |
-					  (1 << STRIPE_REPLACED) |
-					  (1 << STRIPE_PREREAD_ACTIVE) |
-					  (1 << STRIPE_DELAYED) |
-					  (1 << STRIPE_BIT_DELAY) |
-					  (1 << STRIPE_FULL_WRITE) |
-					  (1 << STRIPE_BIOFILL_RUN) |
-					  (1 << STRIPE_COMPUTE_RUN)  |
-					  (1 << STRIPE_OPS_REQ_PENDING) |
-					  (1 << STRIPE_DISCARD) |
-					  (1 << STRIPE_BATCH_READY) |
-					  (1 << STRIPE_BATCH_ERR) |
-					  (1 << STRIPE_BITMAP_PENDING)));
-		WARN_ON_ONCE(head_sh->state & ((1 << STRIPE_DISCARD) |
-					      (1 << STRIPE_REPLACED)));
-
-		set_mask_bits(&sh->state, ~(STRIPE_EXPAND_SYNC_FLAGS |
-					    (1 << STRIPE_DEGRADED)),
-			      head_sh->state & (1 << STRIPE_INSYNC));
-
-		sh->check_state = head_sh->check_state;
-		sh->reconstruct_state = head_sh->reconstruct_state;
-		for (i = 0; i < sh->disks; i++) {
-			if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
-				wakeup_nr++;
-			sh->dev[i].flags = head_sh->dev[i].flags;
-		}
-
-		spin_lock_irq(&sh->stripe_lock);
-		sh->batch_head = NULL;
-		spin_unlock_irq(&sh->stripe_lock);
-		if (sh->state & STRIPE_EXPAND_SYNC_FLAGS)
-			set_bit(STRIPE_HANDLE, &sh->state);
-		release_stripe(sh);
-	}
-
-	spin_lock_irq(&head_sh->stripe_lock);
-	head_sh->batch_head = NULL;
-	spin_unlock_irq(&head_sh->stripe_lock);
-	if (wakeup_nr)
-		wake_up(&conf->wait_for_overlap);
-	if (head_sh->state & STRIPE_EXPAND_SYNC_FLAGS)
-		set_bit(STRIPE_HANDLE, &head_sh->state);
+	if (head_sh->batch_head && do_endio)
+		break_stripe_batch_list(head_sh, STRIPE_EXPAND_SYNC_FLAGS);
 }
 
 static void handle_stripe_dirtying(struct r5conf *conf,