From: Chris Ruehl Date: Wed, 22 Jan 2014 03:14:51 +0000 (+0800) Subject: pinctrl: imx27: fix wrong offset to ICONFB X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=795779df22afc8bdee4e9fbe5c18c47e44974d75;p=linux-beck.git pinctrl: imx27: fix wrong offset to ICONFB The offset to ICONFB was incorrect, this patch set the correct value 0x14. dev_dbg in function imx1_write_2bit print the wrong address and had been moved after address calculation. Cc: stable@vger.kernel.org Signed-off-by: Chris Ruehl Reviewed-by: Markus Pargmann Signed-off-by: Linus Walleij --- diff --git a/drivers/pinctrl/pinctrl-imx1-core.c b/drivers/pinctrl/pinctrl-imx1-core.c index 17aecde1b51d..9e7893fe96e0 100644 --- a/drivers/pinctrl/pinctrl-imx1-core.c +++ b/drivers/pinctrl/pinctrl-imx1-core.c @@ -45,7 +45,7 @@ struct imx1_pinctrl { #define MX1_DDIR 0x00 #define MX1_OCR 0x04 #define MX1_ICONFA 0x0c -#define MX1_ICONFB 0x10 +#define MX1_ICONFB 0x14 #define MX1_GIUS 0x20 #define MX1_GPR 0x38 #define MX1_PUEN 0x40 @@ -97,13 +97,13 @@ static void imx1_write_2bit(struct imx1_pinctrl *ipctl, unsigned int pin_id, u32 old_val; u32 new_val; - dev_dbg(ipctl->dev, "write: register 0x%p offset %d value 0x%x\n", - reg, offset, value); - /* Use the next register if the pin's port pin number is >=16 */ if (pin_id % 32 >= 16) reg += 0x04; + dev_dbg(ipctl->dev, "write: register 0x%p offset %d value 0x%x\n", + reg, offset, value); + /* Get current state of pins */ old_val = readl(reg); old_val &= mask;