From: Adrian Huang Date: Thu, 27 Feb 2014 11:26:03 +0000 (+0000) Subject: xhci: add the meaningful IRQ description if it is empty X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=7969943789df1196faa9ba67518d83fd93e4f9f6;p=linux-beck.git xhci: add the meaningful IRQ description if it is empty When some xHCI host controllers fall back to use the legacy IRQ, the member irq_descr of the usb_hcd structure will be empty. This leads to the empty string of the xHCI host controller in /proc/interrupts. Here is the example (The irq 19 is the xHCI host controller): CPU0 0: 91 IO-APIC-edge timer 8: 1 IO-APIC-edge rtc0 9: 7191 IO-APIC-fasteoi acpi 18: 104 IR-IO-APIC-fasteoi ehci_hcd:usb1, ehci_hcd:usb2 19: 473 IR-IO-APIC-fasteoi After applying the patch, the name of the registered xHCI host controller can be displayed correctly. Here is the example: CPU0 0: 91 IO-APIC-edge timer 8: 1 IO-APIC-edge rtc0 9: 7191 IO-APIC-fasteoi acpi 18: 104 IR-IO-APIC-fasteoi ehci_hcd:usb1, ehci_hcd:usb2 19: 473 IR-IO-APIC-fasteoi xhci_hcd:usb3 Tested on v3.14-rc4. Signed-off-by: Adrian Huang Reviewed-by: Nagananda Chumbalkar Signed-off-by: Sarah Sharp --- diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 1db3c2794a49..652be2138b4b 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -390,6 +390,10 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd) } legacy_irq: + if (!strlen(hcd->irq_descr)) + snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d", + hcd->driver->description, hcd->self.busnum); + /* fall back to legacy interrupt*/ ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED, hcd->irq_descr, hcd);